Page 2 - Graphic Symbol Explanation; CAUTION; IMPORTANT SAFETY INSTRUCTIONS
- 2 - USER'S MANUAL Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electr...
Page 3 - Warning; CALIFORNIA USA ONLY
- 3 - USER'S MANUAL 19.Damage Requiring Service : Unplug this monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the monitor. c. If...
Page 4 - Contents
USER'S MANUAL - 4 - Important Safety Instructions .................................................................... 2 Unpacking ................................................................................................. 5 Viewing the Control Panels .............................................
Page 5 - Viewing the Control Panels
- 5 - USER'S MANUAL Unpacking Remove the package cover and place the product on a flat and secure surface or in the installation location.Check whether all the following devices and accessories are included with the main system. Front View USER'S MANUAL USER'S MANUAL TFT-LCD MONITOR REMOTE & BAT...
Page 6 - Rear & Left Side View; Rear View; POWER; Left Side View
USER'S MANUAL - 6 - Rear & Left Side View USER'S MANUAL USER'S MANUAL Rear View POWER AC power input. VIDEO-A IN Composite signal input for VIDEO A. VIDEO-A OUT Video looping output for VIDEO A. VIDEO-B IN Composite signal input for VIDEO B. VIDEO-B OUT Video looping output for VIDEO B. S-VIDEO ...
Page 7 - Remote Controller
- 7 - USER'S MANUAL USER'S MANUAL Remote Controller POWER Turns the Power On or Off. There will be a few seconds delay before display appears. Number button Changes the SYSTEM ID for remote controller. With the SYSTEM ID button pressed, entered the desired NUMBER by pressing the corresponding button...
Page 8 - Connecting to External Devices.; CAMERA
USER'S MANUAL - 8 - USER'S MANUAL Connecting to External Devices. The product can be connected to an external device such as Camera, DVR,VCR, External Monitor, etc. CAMERA VCR External MONITOR DVR SMT-1722-1922-Eng.indd 1:8 2008-7-10 9:20:25
Page 9 - OSD Menu Configurations; No Signal Display; No Signal; Picture Menu
- 9 - USER'S MANUAL When there is no connection at the VGA and Video input, the On Screen Display will show this message. 1. Press the MENU button to see the main menu.2. Press / and ENTER button to select the main menu.3. Press / and ENTER (or ) button to select the sub menu. 4. Press / and ENTER (...
Page 10 - setting value and save.
- 10 - USER'S MANUAL 4. Press the / and the ENTER button to adjust the setting value and save. 5. Press the MENU button to exit. In VGA Mode, Only "Contrast" and "Brightness" can be adjusted. Color Tone : Cool2, Cool1, Normal,Warm1, Warm2 1. Press the MENU and / button to select the ...
Page 11 - Freezing the Current Picture; You can return to the factory defaults picture settings.; Sound Menu
- 11 - USER'S MANUAL • Digital NR : Off/Low/Medium/High/Auto If the signal received by the monitor is weak,you can activate this feature to reduce any noisy signal that may appear on the screen. This function is not available in VGA mode. This function is not available in Movie mode. • DNIe: Off/Dem...
Page 12 - Setup Menu
Equalizer 1. Press the MENU and / button to select the Sound menu. 2. Press the ENTER or button. 3. Press the / and ENTER button to select the Equalizer menu. 4. Press the / button to select a particular item. Press the ENTER button. 5. Press the / and ENTER button to adjust the setting value and sa...
Page 13 - Main picture
- 13 - USER'S MANUAL Blue Screen/Melody 1. Press the MENU and / button to select the Setup menu. 2. Press the ENTER or button. 3. Press the / and ENTER button to select the Blue Screen or Melody menu.4. Press the / and ENTER button to select the setting you want. • Blue Screen: Off/On If no signal i...
Page 14 - and ENTER; Setting up Your PC Software
Press the PIP button on the remote control repeatedly to activate or deactivate the "PIP".5. Press the / button to select "Source", then press ENTER button. Select a source of the sub picture by pressing the / button and press the ENTER button. 6. Press the / button to select Size me...
Page 15 - PC
PC • Image Lock(Coarse and Fine Tuning of the Image) The purpose of picture quality adjustment is toremove or reduce picture noise. If the noise is not removed by Fine-tuning alone,then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust...
Page 16 - Input Menu
- 16 - USER'S MANUAL System ID 1. Press the MENU and / button to select the Setup menu. 2. Press the ENTER or button. 3. Press the / button to select the System ID. 4. Press the / and ENTER button to select the setting you want .(0~9) 5. Press the MENU button to exit. No Signal OSD No Signal OSD det...
Page 17 - Specifications; Model Name
- 17 - USER'S MANUAL Specifications Model Name SMT-1722 SMT-1922 Sales Area World Wide Broadcasting System NTSC/PAL System Panel Inch 17" 19" Display Type SXGA a-Si TFT LCD Resolution (HxV) 1280 X 1024 Brightness(cd/m2) 300 Contrast 1000:1 Response Time 5msec Viewing Angle Degree 80/80/80/80...
