Samsung SHR-2160P - User Manual

English v Please be sure to keep the following in mind for the right use of the product to pre-vent proprietary risk or damage. ■ Do not use multiple plugs at once. ● This may cause abnormal heat generation or fire ■ Do not put a vase, flowerpot, cup, cosmetics, medicine, or vesselwith water around ...

English SHR-2160/2162/2080/2082 USER’S MANUAL vi WARNING [Battery]Changing the battery in the SHR-2160/2162/2080/2082 incorrectly may cause an explosion therefore you must use the identical battery that is being used in the SHR-2160/2162/2080/2082. The following are the specifications of the battery...

1 Introduction 1-1 The Digital Video Recorder(DVR) compresses the 16 channel(SHR-2162/2160) / 8 channel(SHR-2082/2080) of camera video into MPEG4 data video file and the 4 channel ofaudio inputs into ADPCM data audio file in the real time to record them in the Hard Disk orretrieve them from the Hard...

2 Features 1-2 ■ 16 / 8 CH Composite Input Connectors ■ NTSC / PAL Video Source Compatible ( NTSC : SHR-2162, SHR-2160, SHR-2082, SHR-2080 SHR-2162N, SHR-2160N, SHR-2082N, SHR-2080N PAL : SHR-2162P, SHR-2160P, SHR-2082P, SHR-2080P ) ■ Able to record the CIF sized (NTSC - 352 x 240 / PAL - 352 x 288)...

English No. Name Function SHR-2160/2162/2080/2082 USER’S MANUAL 3 Part Names and Functions 1-3 Power LED HDD Access LED Displays Normal Access to HDD. Upon Access to HDD, LED repeats on and off. Displays power on/off condition. 1 2 3 Network LED Displays both network connection and data transmission...

English SHR-2160/2162/2080/2082 USER’S MANUAL 1-7 Caution Caution Do not install DVR on the carpet or other soft material to prevent clogging of the air ventilator.To install DVR on the cabinet or rack, be sure to check the ventilation condition. No. Name Function Composite Video Signal Input Port (...

1-8 KEY Function Starts or ends the recording as the setup recordsetting in normal record mode. Used to open and close the DVD-RW tray.(SHR-2082/2162) Selects single channel while in live mode. Usedas a numeral input key in numeral input mode.(For channel selection method, refer to footnote 1) Locks...

English SHR-2160/2162/2080/2082 USER’S MANUAL 1-9 Channel How to operate the keys Press the 1 button. Press the 2 button. Press the 3 button. Press the 4 button. Press the 5 button. Press the 6 button. Press the 7 button. Press the 8 button. Press the 9 button. Press the 0(10+) button, release, and ...

1 Installation Environment Setup 2-1 Do not install DVR on the carpet or other soft material to prevent clogging of the air ventilator.To install DVR on the cabinet or rack, be sure to check the ventilation condition. You should pay attention to the following before you use the product. 1. Do not us...

SHR-2160/2162/2080/2082 USER’S MANUAL 2-3 English 2 Checking Product & Accessory Upon delivery of a product, you shall unwrap the product and put it on the even floor or whereyou want to use it. Then you shall check if the following items are in it. ■ Main Body ■ User’s Manual ■ One Power Cord ■...

English 2-4 3 HDD Addition SHR-2160/2080 HDD The user can add up to 3 HDDs to this product. However, there are many factors that cancause electrical shock, accidents, and malfunctioning of the device inside of the product. When the user does not correctly install or apply the proper settings, the de...

English 1 Connecting the Video, Audio, and Monitor 3-1 SHR-2160/2162/2080/2082 USER’S MANUAL [SHR-2160/2162] SHR-2160/2162/2080/2082-E-0 4/26/07 12:54 PM Page 3-1

English SHR-2160/2162/2080/2082 USER’S MANUAL 3-3 2 Connecting the Network ● Connecting to Internet through Ethernet(10/100BaseT) ● Connecting to Internet through ADSL [SHR-2160/2162] [SHR-2160/2162] SHR-2160/2162/2080/2082-E-0 4/26/07 12:54 PM Page 3-3

English 1. There are two USB connecting ports, on the front and other on the back of SHR-2160/2162/2080/2082. 2. USB Hard Disk, USB CD/DVD, and USB Memory may be connected through the front or through the back ports of SHR-2160/2162/2080/2082. 3. Only one USB device can be connected with each USB co...

English 3-6 4 Connecting the Alarm Input/Output The Alarm IN/OUT port in the back of SHR-2160/2162 is composed of the followingelements. ● ALARM IN/OUT Connection ALARM Output Port Name Function - ALARM IN1- ALARM IN2- ALARM IN3- ALARM IN4- ALARM IN5- ALARM IN6- ALARM IN7 1 - ALARM IN8 ALARM Input P...

English SHR-2160/2162/2080/2082 USER’S MANUAL 3-9 5 Connecting the RS-485 Device ● Connect the RS-485 Device through the back port of SHR-2160/2162. ● You can install and control the PTZ camera supporting the RS-485 communication. ● You can adopt either Half Duplex or Full Duplex method for the conn...

English 1 System Operation 4-1 SHR-2160/2162/2080/2082 USER’S MANUAL ● Turn the power on and the following LOGO pops up on the screen. ● After the LOGO appears, all of LED in the front flickers 6 times to initialize the system foroperation. ● Upon completion of normal initialization, the Live screen...

2 Live screen Mode 4-2 Definition of Live Screen Icon The Live screen icons display the current setup and function status of each screen. English CAM_01 CAM_01 V.Loss : Recording Icon Each icon represents Normal / Event (Alarm + Motion) / Schedule Recording. : Recording Video Size Icon Each icon rep...

English SHR-2160/2162/2080/2082 USER’S MANUAL 4-3 : Auto sequence Icon This icon appears in the auto sequence mode. : Backup Playback Icon This icon appears when the backup data is played. : Fan Error Icon This icon appears when the fan stops. : No HDD icon Comes up when there is no HDD.When the fan...

English 4-4 Selecting Live Screen Mode Each mode may be selected by [MODE Button] and [CH1 ~ CH16 Button] The following figure shows Live Mode of SHR-2160 after converted. ● The SHR-2160' initial screen is split screen mode.The SHR-2080/2082' initial screen is 9 split screen mode. ● The 9 Split Scre...

English 3 Live Channel Selection and Audio On/Off Setup In other split modes than Full Screen Mode and Auto Sequence Mode, you can choose a channelto be displayed in each split area on your own. In addition, the channel being set to Audio On canbe turned to Audio On/Off in all Live Modes. Audio On/O...

English 4-6 4 Freeze and Zoom Freeze Function Freeze function pauses the video image in the Live Screen, it is only available in the Live Mode.You can set freeze to on or off with the [FREEZE] button. Zoom Function Zoom function enlarges the selected area to double size, and it is only available in ...

English 5 Event Monitoring Event monitoring displays the channel synchronized with a event on the screen when a special event (Sensor/Motion/Video Loss) occurs. Event monitoring On/Off and event duration setup is available in [Menu] ➝ [Monitoring] mode. If you set the event monitoring interval to 5 ...

English 1 System 5-2 ● DatePress the “Enter” key and the ¦ , ‹ key to move to Y/M/D. Use the œ , ƒ key to change the date. Press the “Enter” key to come out of the mode. ● TimePress the “Enter” key and the ¦ , ‹ key to move to H/M/S. Use the œ , ƒ key to change the time. Press the “Enter” key to com...

English 5-4 Password ● The Default Password is 4321. ● New PasswordThis is used to change the system password inside SHR-2160/2162/2080/2082.You are allowed to create a password up to 8 digits. Press the “Enter” key and achannel button from 1~9,10(operates as 0) at the left. Press the “Enter” key af...

English SHR-2160/2162/2080/2082 USER’S MANUAL 5-5 Load Factory Default MENU ● It is used to initialize all the menu setup values. Video data recorded will not be deleted.Press “OK” in the confirmation window to start initializing. System Log ● System Log is used to check the important record by an a...

English 5-6 Event Log ● It used to check the record regarding Event like Alarm / Motion / Video Loss. ● It displays the contents of a log regarding event and its execution date / time. ● First : Returns to the first Log page. ● Prev : Back to the previous Log page. ● Next : Forwards to the next Log ...

English SHR-2160/2162/2080/2082 USER’S MANUAL 5-7 System Information and Setup Storage Setup You can configure the storage device related settings. This setup window provides the following setting items: ● Software Version: Displays the current software version. The value cannot bechanged. ● Broadca...

English SHR-2160/2162/2080/2082 USER’S MANUAL 5-9 Export/Import the Configuration This menu is used to export or import the DVR-related settings to/from the USB memory. The related settings are as the following: ● Mode: You can select any of Import and Export. ● File Name or File Open: The file nami...

English 5-10 Remote control Device ● MENU for the use of Samsung system keyboard ● Device A Remote Control Device, being connected to the RS485 port. ● ID This is a private ID of SHR-2160/2162/2080/2082.This private ID is essential for SSC-2000 because SSC-2000 can control many SHR-2160/2162/2080/20...

English SHR-2160/2162/2080/2082 USER’S MANUAL 5-11 System Shutdown ● Terminates the work in action safely and turns the power off. Press “OK” in the confirmationwindow and plug out when you see “Safe to Power Off”. MENU Caution Caution [System Shutdown]Power-off without terminating the system in the...

English 5-12 2 Camera ● The detailed Camera Menu items are as follows. ● ImageOn : Camera images from a selected channel appear.Off : Camera images from a selected channel disappear. Covert1 : Displays the information except for the Video information of selected channel. Covert2 : Does not display t...

English 5-14 PTZ Device ● ID It is an ID for PTZ Camera and available to set from 0 to 255. ● Protocol It is supported by the PTZ device. The following protocols are now being supported. Samsung / Vic. / Pan. / AD / Phi. / Ern. / Pel-D / Pel-P / Vcl. / Dia. / Kal. / Tech. ● Baurate Baurate is suppor...

English Screen Setup SHR-2160/2162/2080/2082 USER’S MANUAL 5-15 ● It is a window to set Brightness/Contrast/Color for the camera image of each channel. Put the cursor on the channel that you want to adjust and set Brightness/Contrast/Color. Once selected, the channel appears in the right PIP area. U...

English 5-16 3 Monitoring ● Event Monitoring It is possible to set to Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous. ① Off : Event Monitoring does not operate to turn to the screen where an event occurs. ➁ 3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto Se...

English 5-18 4 Recording Mode Record mode ● Record mode menu’s detailed list is as follows. Record Quality & Auto Deletion ● Recording picture quality Sets the recording picture quality. You can set up from Very High / High / Standard / Low ● Auto Deletion If you click the off button on the lowe...

English SHR-2160/2162/2080/2082 USER’S MANUAL 5-19 When you press the REC button in the front, it selects the record mode settings. ● Record/seconds Sets the recording frame rate. The frame rate is number of the recorded scenes per second.When setting up to 30ips(NTSC)/25ips(PAL), there are many sce...

English 5-20 Event Record Duration ● Pre-Event(PreEve.) ● Post-Event(PostEve.) Records the situation until Alarm is issued. Off : No recording 5sec / 10sec / 20sec / 30sec : The recording time options before Alarm issue Records the situation since Alarm is issued.Off : No recording5sec / 10sec / 20s...

English SHR-2160/2162/2080/2082 USER’S MANUAL 5-21 5 Event Record Mode ● Event record menu’s detailed list is as follows. MENU SHR-2160/2162/2080/2082-E-0 4/26/07 12:55 PM Page 5-21

English 5-22 Alarm Detection Setup ● Off : Sensor does not operate. ① N.O(Normal Open) Sensor : Sensor remains open all the time and if closed, an alarm will be issued. (A Contact) ➁ N.C(Normal Close) Sensor : Sensor remains closed all the time and if open, an alarm will be issued. (B Contact) ● Cam...

English SHR-2160/2162/2080/2082 USER’S MANUAL 5-23 Motion Detection Setup ● Motion Detection Mode Off : Motion Detection does not operate On : Motion Detection operates. ● Area Selects the Motion Detection area. It is impossible to set 4 block rows(Up / Down / Left / Right) to allow them to be displ...

English 5-24 ● Sensitivity Sets the sensitivity of motion detection. Sensitivity grade consists of Low ➝ Medium ➝ Very High in the ascending order. ● Alarm-Out Sets the Alarm-Out when Motion occurs. 5 Alarm Outs are supported. Select an alarm-out that you want to synchronize with the current motion ...

English SHR-2160/2162/2080/2082 USER’S MANUAL 5-25 6 Record Schedule This setup selects a time to record automatically.Selection by the day or by the time is available.The default value is set to “Event Record”. ● Press “CH >” copies the value of Channel 1 to all the channels. ● The horizontal ax...

English SHR-2160/2162/2080/2082 USER’S MANUAL 5-27 7 Backup ● If there is a device, the free space and the backup device is displayed. ● Select a date, time, and camera No. to backup, and press “Start”. ● When you change Start Date/Time or End Date/Time, free space keeps updated in the Free Space zo...

English 5-28 8 Network ● Connection Mode Designates the kind of the network connected to the main body of SHR-2160/2162/2080/2082.Static IP : When the main body is connected to the network with Static IP. Dynamic IP : When the main body is connected to the network with Dynamic IP supplied by DHCP. A...

English 5-30 Transfer Protocol Settings ● You may select either TCP or UDP for the protocol type. If you select ADSL from the IP setup page, only TCP is available. While TCP is selected, Audio transmission is not available. ● The available Port(TCP) ranges from 554 to 998 and the port number will be...

English SHR-2160/2162/2080/2082 USER’S MANUAL 5-31 Callback Settings ● The Callback function is used to forward a callback message to the IP where SmartVieweris in action in case Alarm, Motion Detection, or Video Loss event occurs. ● On/Off : Off is default but you may choose On. ● IP Address : IP s...

English 5-32 9 Network Setup Port Setup for SmartViewer Connection ● The Port value for DVR registration of SmartViewer (Setup ➝ Site Setup) shall be as same as that of the set (TCP). ● If you want to use the IP Router, you shall forward the activated Port depending on thecurrent setting value. - If...

1 PTZ Camera Control Mode 6-1 ● Select a proper PTZ camera Configuration value in MENU to enter PTZ Control Mode. English ● Selected in MENU, the PTZ symbol( ) is displayed on the channel in the screen. ● If you press the Enter( ) button among direction keys in front of Split Screen, a bluebar will ...

3 Preset Setup 6-4 ● Records a certain position of PTZ Camera. ● Memorizes up to 20 PTZ Camera positions at the moment. English ● Press the Preset button in front of SHR-2160/2162/2080/2082 in Single Screen PTZCamera Control Mode to set up Preset. ● After Preset setup, press ENTER. PTZ TELE WIDE VIE...

4 Camera Menu Setup 6-6 ● Camera Menu is a menu supplied by PTZ Camera itself. This Menu sets up several conditions of PTZ Camera. English ● Press the Preset button in front of SHR-2160/2162/2080/2082 in Single Screen PTZCamera Control Mode to select Camera Menu. ● Press the “Preset” button in front...

SHR-2160/2162/2080/2082 USER’S MANUAL 5 Preset View 6-7 ● Preset setup allows your movement to a certain saved position of PTZ Camera. ● Press the VIEW button in front of SHR-2160/2162/2080/2082 in Single ScreenPTZ Camera Control Mode to select Preset.(For example, Samsung Protocol) English ● Contro...

● After you select a function, press Enter. Then the function will be checked and start running. ● If you select other function during the operation, the previous function willbe unchecked and the current function will be checked. ● If you put P/T/Z/ during the operation or enter the Preset Setup or...

2 Schedule Recording 7-2 ● While “Record Schedule” or “Schedule/Event recording” is selected in the Record Schedulemenu, Schedule Recording automatically starts. Otherwise, Schedule Recording remainsinactivated. During the Schedule Recording, Recording Icon appears on the screen. During the recordin...

English SHR-2160/2162/2080/2082 USER’S MANUAL 3 Event Recording 7-3 ● Alarm Detection Sensor operation mode in Alarm of Event Record menu shall be set to N.O (Normal Open)or N.C (Normal Close). ● Motion Detection Motion detection in the Event Recording menu shall be set to On. ● Video Loss Detection...

English 1 Calendar Search 8-2 ● Be sure to select both the channel and the date to search. And press the [OK] button tosearch for the desired time. ● Use a calendar to search the video file of desired time. ● When you select the desired channel with the enter button and the ¦ , ‹ button, the section...

English SHR-2160/2162/2080/2082 USER’S MANUAL 8-3 ● Searches Normal Recording, Schedule Recording, Alarm Recording, Motion Recording, andV.Loss(Video Loss) Recording by the time. ● You shall select a channel to search to see the event information of the channel. ● On the basis of event information f...

English SHR-2160/2162/2080/2082 USER’S MANUAL 8-5 ● Searches the oldest one among recorded video files. Up to 16 channels can be searched atonce. ● After you select a channel with the œ , ƒ , [Enter] button, the checkbox on the right of the selected channel number will be checked. ● Press the [Start...

English 5 Go to Last Search 8-6 ● Searches the latest one among recorded video files. Up to 16 channels can be searched atonce. ● After you select a channel with the œ , ƒ ,[Enter] button, the checkbox on the right of the selected channel number will be checked. ● Press the [Start] button want to st...

English 7 Playback 8-8 Note Note Pressing the PLAY button( ) does not affect the playback as far as the user stays in theMENU. Be sure to exit from the MENU to start the playback. ● Press the STOP button( ) to stop the playback. If you press the Playback/PAUSE button( ) once more, the recording will...

English 2 Feature 9-2 ● Thanks to the transmission of video data compressed by the MPEG-4 VideoCompression method, it can play the video images of good quality. ● Thanks to the G.711 Voice Compression method, it supplies the voice data ofgood quality. Use of armored MIC improves the quality of remot...

● Run the “Setup.exe” file. 4 Smart Viewer Installation 9-4 Smart Viewer Installation ● Put a Smart Viewer Program CD in CD-ROM and open the “Smart Viewer” folder in the CD. English SHR-2160/2162/2080/2082-E-2 4/26/07 1:17 PM Page 9-4

SHR-2160/2162/2080/2082 USER’S MANUAL 9-7 English 5 Smart Viewer Program Execution ● Double-click the Smart Viewer icon in the background screen to run the program. SHR-2160/2162/2080/2082-E-2 4/26/07 1:17 PM Page 9-7

6 Smart Viewer Initial Screen 9-8 ● Screen Description English ! This is the button to enter the Search mode in which you can search and play remote the video file recorded in SHR-2160/2162/2080/2082 and enter the Monitoring mode for real-time video monitoring. @ This button terminates or minimizes ...

English SHR-2160/2162/2080/2082 USER’S MANUAL 7 Setup Mode 9-9 ● Initial Screen ! Button to select items for DVR Setup, Viewer Setup, Site Setup, and S/W Version setup. @ It shows what the selected Setup item can set up in detail. # Button to terminate the setup window. $ Button to save the informat...

English SHR-2160/2162/2080/2082 USER’S MANUAL 9-11 DVR Setup - Click the [DVR Setup] button for DVR Setup.- You can change remotely the setup items of SHR-2160/2162/2080/2082 Menu, being connected with Smart Viewer. - DVR Setup is composed of 5 items; System, Camera/Audio, Monitoring, Recording, and...

English 9-24 Note Note - SHR-2160/2162/2080/2082 uses 4 ports for TCP connection.- The PORT number is flexible and 4 consecutive numbers are grouped for the change ( 554,555,556,557 ➝ 558,559,560,561 ) - If you use the IP Router for network composition, you should allocate a protocol for SHR-2160/21...

English SHR-2160/2162/2080/2082 USER’S MANUAL 9-27 Site Setup - Click the [Site Setup] button for Site Setup. - The information of DVR(SHR-2160/2162/2080/2082) or Site that you want to connect by Smart Viewer is set in the Site Setup. - Smart Viewer allows you to connect with DVR(SHR-2160/2162/2080/...

9-40 English 8 Monitoring Mode ● DVR(SHR-2160/2162/2080/2082) / SITE Connection- Select the name of DVR(SHR-2160/2162/2080/2082) or site for connection and click the connection button. Connection Failure Cases 1. Password Certification Failure - In case of discord between the Network password set to...

9-54 English 9 Search Mode ● The initial screen of search mode - The search mode is divided into the remote mode to search and play the SHR-2160/2162/2080/2082 video and the local mode to play *.dvr file saved in the directory designated by your PC. ! To change to the search mode for the remote cont...

Appendix SHR-2160/2162/2080/2082-E-2 5/3/07 11:19 AM Page 9-62

English 1 Product Specification 10-1 SHR-2160/2162/2080/2082 USER’S MANUAL Specs Details Notes Operating System Embedded OS Broadcasting NTSC System AC 110~220(NTSC) Input Voltage AC 100~230(PAL) Power Usage 2160/2080 : 56W, 2162/2082 : 60W Composite 16(8) Channel - 1.0Vp-p - 75 Ω Hi Z Termination V...

10-4 English 2 Outline Drawings [SHR-2160] [SHR-2162] SHR-2160/2162/2080/2082-E-2 4/26/07 1:17 PM Page 10-4

10-6 English 3 Factory Default This restores the Network information and preset values in SHR-2160/2162/2080/2082 to the original state at the time of factory shipment. Factory Default will be done as follows; - Use System / Load Factory Default in MENU or, - In Live mode, press and hold down MODE a...

SHR-2160/2162/2080/2082 USER’S MANUAL 10-9 English 4 SHR-2160/2162/2080/2082 Smart Viewer Frame Specification for the Playback FRAME Viewer Screen VIDEO SIZE RATE Split Mode Half D1(N) CIF (C) 16-split 0.5 frame/sec 9-split 2.5 frame/sec 4-split 7.5 frame/sec Single 7.5 frame/sec Half D1(N) CIF (C) ...

10-14 English GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free SoftwareFoundation, Inc. 51 Franklin Street, Fifth Floor, Boston,MA 02110-1301, USA Everyone is permitted to copy and distrib-ute verbatim copies of this license docu-ment, but changing it is not allowed. Pre...