Samsung SCC-131BP - Manual

C A M E R A T e r m s & F e a t u r e s

V i d e o S e c u r i t y S y s t e m s

Lens Selection

When using an auto iris lens,

The lens selection switch next to the camera should be set according to the type of auto iris lens. Select ‘DC’ if the
installed lens is a DC-control type, and select ‘VIDEO’ if it is a video-control type.
Adjust the illumination level with the DC-IRIS VR at the back of the camera when DC-type is selected, or adjust the
Illumination level by using the level VR on the lens when video-type is selected.

* When using an AI lens, turn off the ELC switch at the back of the camera.

When using a manual iris lens,

Open the lens iris completely and turn on the ELC function at the back of the camera.

Rb

Pin3

Pin1

Pin2

Pin4

Pin no.

DC Control Type

VIDEO Control Type

1

Damp (-)

Power (+12V)

2

Damp (+)

N/A

3

Drive (-)

VIDEO Signal

4

Drive (+)

GROUND

Camera Back Focus Adjustment

The back focus of the camera is set when the product is shipped from the factory. However, the back focus can be adjusted in the following
manner if the focus is not properly set.

For Standard Lens (non-Zoom)

1. The lens should be able to clearly recognize high-definition images such as an

object with cross stripes from a distance of 10 meters when the focus ring of
the lens is set to infinity(

∞

).

2. Adjust the focus by turning the control ring of the flange back until the object

can be seen clearly under the circumstances described above.

3. Fasten the screw of flange back control ring.

For Zoom Lens

1. Place a high-definition image 3-5m apart from the camera and then turn the

focus of the lens as far as possible in the TELE (zoom in) direction so that the
image can be seen vividly as possible.

2. Turn the lens zoom as far as possible in the WIDE direction, turning the flange

back control ring of the camera so that the object can be seen most vividly.

3. Adjust so that the focus from the TELE side can be vividly matched with the

focus from the WIDE side by repeating above steps 1 and 2 2~3 times.

4. Fasten the screw of the flange back control ring.

The control can be set more accurately if the focus can be adjusted by attaching
dark color paper or ND filter to the front lens.

Flange Back Focusing Distance

C Mount

17.526mm

CS Mount

12.5mm

S C C - 1 3 1 B / 1 0 1 B P

1/3” High Resolution, Color Digital Camera

37

CAMERAS

Video Security System

Features

Dimensions (unit:mm)

• DSP (Digital Signal Processor)

• 1/3" Super HAD CCD (SCC-131B:410K/470K, SCC-131BP:470K)

• Horizontal resolution : 520 TV Lines

• Back light compensation circuitry

• External synchronization with Line lock

• Accepts 2 types of auto-iris lenses (DC / Video)

• Accepts CS/C-mount without adaptor

• Power input (SCC-101BP: AC220V~240V / SCC-131B(P): AC24V/DC12V)

• Built-in ground fault isolation transformer

Specifications

Summary

This color camera is capable of superb observation, thanks to its state-

of-the-art implementation of 1/3" CCD (410,000/470,000 pixels for

NTSC, 470,000 pixels for PAL) with economical price.

Imaging Device

1/3" Super HAD CCD

Effective Pixels

768(H)x494(V)

752(H)x582(V)

Scanning Method

Interlace/Line lock

Scanning

Horizontal

15.750Hz

15.625 Hz

Line Frequency

Vertical

60Hz

50Hz

Synchronization Method

Internal / Line lock (V PHASE control)

Horizontal Resolution

520 TV Lines

Video Output

VBS 1.0Vp-p

S/N Ratio

50dB

Lens

AI(Video/DC)

Minimum Scene Illumination

0.15(Sens up Off,15IRE)Lux

Functions

BLC

On

AGC

On

White Balance

ATW/AWC

ELC

Off/On(Max. 1/120Ksec)

Operating Temperature

-10°C ~ +50°C

Operating Humidity

Less than 90%

Power Requirment

AC24V/DC12V compatible

Power Consumption

3W

Weight

450g

Dimensions

65(W) x 52(H) x 133(D)mm

Model

SCC-131B

SCC-131BP

NEW PRODUCTS

CAMERAS

MONITORS

DVRS

NETWORK SECURITY

CONTROLLERS

36

CAMERAS

Video Security System

*

SCC-101BP is same as SCC-131BP except for Power Requirment (AC 220V~240V)

SCC-131B

SCC-101BP