Raypak CR24-185 - Manual
Raypak CR24-185 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Water Chemistry; Recommended Level(s) Fiberglass Pools Fiberglass Spas
- Page 3 – CAUTION; Operating control and high limit are
- Page 5 – Designed and fabricated to the; Installation Guidelines; Plumbing
- Page 6 – Sample Installation Diagram; Controls
INSTALLATION INSTRUCTIONS
Catalog No. 6300.50
Effective: 07-28-10
Replaces: NEW
P/N 241399 Rev. 1
Model Series
RP-045 through RP-995 and
CR24-185 through CR24-495
Raypak
Indirect
Pool
Heaters
NOTE:
The instructions in this manual are for the use of qualified individuals specially trained and experienced
in the installation and maintenance of this type of equipment and related system components. Installation and
service personnel are required by some states to be licensed. Persons not qualified shall not attempt to install,
service, or maintain this equipment.
This manual should be maintained in legible condition and kept adjacent to the heat source or in a safe place
for future use.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Water Chemistry (Corrosive water voids all warranties) For your health and the protection of your pool equipment, it is essential that your water be chemicallybalanced. The following levels must be used as a guide for balanced water. Recommended Level(s) Fiberglass Pools Fiberglass Spas Other Pool &...
3 Elevated water temperature can be hazardous. The U.S. Consumer Product Safety Commission has these guidelines: 1. Spa water temperatures should never exceed 104°F (40°C). A temperature of 100°F (38°C) is considered safe for a healthy adult. Special caution is suggested for young children. 2. Drink...
5 Table 3: Design Ratings Pressure Temperature Tubeside 235 PSI 406°F Shellside 190 PSI 406°F Model Boiler Flow Boiler Head Loss Pool Flow Pool Head Loss Heating Surface SS316L CR24 Super Alloy GPM Feet GPM Feet Sq. Ft. Min Max Min Max Min Max Min Max RP-045 5 15 0.5 1.0 20 40 1.5 6.0 2.0 RP-075 10 ...
