Porter-Cable DA250A - Manual
Porter-Cable DA250A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – GENERAL SAFETY RULES
- Page 5 – DO NOT DRIVE FASTENERS; on top of; DO NOT DRIVE FASTENERS CLOSE; or for tasks in which; TECHNICAL SPECIFICATIONS
- Page 6 – FOREWORD
- Page 7 – PREPARING THE TOOL; Keep tool pointed away from yourself and others at all
- Page 8 – USING THE TOOL; Do Not
- Page 9 – CLEARING A JAMMED FASTENER; Disconnect tool from air supply.
- Page 10 – MAINTENANCE; CLEAN AND INSPECT DAILY; Disconnect tool from air supply before cleaning and; SERVICE AND REPAIRS; TROUBLESHOOTING; Disconnect tool from air supply before performing any
- Page 11 – ACCESSORIES
FINISH NAILER
Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
Part No. 903090 (016)
ESPAÑOL: PÁGINA 13
FRANÇAISE : PAGE 23
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2001 Porter-Cable Corporation
MODEL DA250A
903090 - 06-30-01.qxd 9/25/02 1:52 PM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 GENERAL SAFETY RULES WARNING: When using pneumatic tools, basic safety precautions should always be followed to reduce the risk of personal injury, including thefollowing: READ AND FOLLOW ALL INSTRUCTIONS. There are certain applications for which this tool was designed. Porter-Cablestrongly recomm...
5 19. FIRE FASTENERS INTO WORKSURFACE ONLY, never into materials too hard to penetrate. Fig. 11. 20. GRIP TOOL FIRMLY TO MAINTAINCONTROL WHILE allowing tool to recoil away from work surface as fastener isdriven. If safety element is allowed torecontact work surface before trigger isreleased an unwan...
6 EMPLOYER’S RESPONSIBILITIES WARNING: Employer must enforce compliance with the safety warnings and all other instructions contained in this manual. Keep this manual available for use by all people assigned to use this tool. For personal safety and proper operation of this tool, read and follow all...
