Page 2 - CAUTION; IMPORTANT
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended toal...
Page 3 - Operating Environment
Information for users on collection and disposal of old equipment and used batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recover...
Page 4 - Contents
4 En Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Contents Flow of settings on the receiver . . . ...
Page 5 - 8 Making recordings; Bluetooth; 0 Additional information
English Italiano Français N ederlands Es pañol Deut sc h 5 En English Français Español 08 Making recordings Making an audio or a video recording . . . . . . 47 09 Other connections Bluetooth ® ADAPTER for Wireless Enjoyment of Music . . . . . . . . . . . . . . . . . . . . 48 Wireless music play . . ...
Page 6 - Flow of settings on the receiver; procedure below to make the connections and; (When using connections other than the
6 En Flow of settings on the receiver The unit is a full-fledged AV receiver equipped with an abundance of functions and terminals. It can be used easily after following the procedure below to make the connections and settings. The colors of the steps indicate the following: Required setting item Se...
Page 7 - English; Before you start; Checking what’s in the box; Installing the receiver
Before you start 01 7 En English Français Español Chapter 1: Before you start Checking what’s in the box Please check that you’ve received the following supplied accessories: • Setup microphone• Remote control • AAA size IEC R03 dry cell batteries (to confirm system operation) x2 • AM loop antenna• ...
Page 8 - Ventilation; Receiver
Before you start 01 8 En Ventilation When installing this unit, make sure to leave space around the unit for ventilation to improve heat dispersal (at least 40 cm at the top). If not enough space is provided between the unit and walls or other equipment, heat will build up inside, interfering with p...
Page 9 - Controls and displays; Front panel; Operating range of remote control
Controls and displays 02 9 En English Français Español Chapter 2: Controls and displays Front panel 1 STANDBY/ON 2 INPUT SELECTOR dial Selects an input source. 3 MCACC indicator Lights when Acoustic Calibration EQ (page 34) is on (Acoustic Calibration EQ is automatically set to on after the Auto M...
Page 10 - Auto playback
Controls and displays 02 10 En TUNER EDIT Use with TUNE / , PRESET / and ENTER to memorize and name stations for recall (page 43, 44). PRESET / Use to select preset radio stations (page 43). 8 MASTER VOLUME dial 9 PHONES jack Use to connect headphones. When the headphones are connected, there ...
Page 11 - Display
Controls and displays 02 11 En English Français Español Display 1 PHASE Lights when the Phase Control is switched on (page 33). 2 AUTO Lights when the Auto Surround feature is switched on (see Auto playback on page 30). 3 RDS Lights when an RDS broadcast is received (page 45). 4 ST Lights when a ste...
Page 12 - Listening in
Controls and displays 02 12 En 2 D + Lights when a source with Dolby Digital Plus encoded audio signals is detected. 2 HD Lights when a source with Dolby TrueHD encoded audio signals is detected. EX Lights to indicate Dolby Digital EX decoding. 2 PLll(x) Lights to indicate 2 Pro Logic II / 2 Pro Log...
Page 13 - Remote control; RECEIVER
Controls and displays 02 13 En English Français Español Remote control As for operating other devices, the remote control codes for the Pioneer products are preset. The settings cannot be changed. 1 SLEEP Press to change the amount of time before the receiver switches into standby ( 30 min – 60 min ...
Page 16 - Connecting your equipment; Placing the speakers; By connecting the left and right front speakers (; Connect the surround back or front height
Connecting your equipment 03 16 En Chapter 3: Connecting your equipment Placing the speakers By connecting the left and right front speakers ( L / R ), the center speaker ( C ), the left and right surround speakers ( SL / SR ), and the subwoofer ( SW ), a 5.1 ch surround system can be enjoyed. Furth...
Page 17 - Hints on the speaker placement; Setting the Up Mix; PRE OUT SURR BACK/FRONT; Connect the; HEIGHT; The Pre Out Setting
Connecting your equipment 03 17 En English Français Español Hints on the speaker placement Where you put your speakers in the room has a big effect on the quality of the sound. The following guidelines should help you to get the best sound from your system. • The subwoofer can be placed on the floor...
Page 18 - Speaker setting; LARGE; Bare wire connections; Front speaker terminals:; Center and surround speaker terminals:; Twist exposed wire strands together.
Connecting your equipment 03 18 En Connecting the speakers The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended, and a complete setup is best for surround sound. Make sure you connect the speaker on the right to the...
Page 19 - HAZARDOUS LIVE voltage; Making cable connections; Important
Connecting your equipment 03 19 En English Français Español CAUTION • These speaker terminals carry HAZARDOUS LIVE voltage . To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts. • Make sure that al...
Page 20 - HDMI cables; HDMI cable; Analog audio cables
Connecting your equipment 03 20 En HDMI cables Both video and sound signals can be transmitted simultaneously with one cable. If connecting the player and the TV via this receiver, for both connections, use HDMI cables. 1 Be careful to connect the terminal in the proper direction. About HDMI The HDM...
Page 21 - Digital audio cables; Standard RCA video cables; HDMI OUT
Connecting your equipment 03 21 En English Français Español Digital audio cables Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this receiver. 1 Video cables Standard RCA video cables These cables are the most common type of vide...
Page 22 - Connecting using HDMI; This diagram shows connections of a TV and
Connecting your equipment 03 22 En Connecting a TV and playback components Connecting using HDMI If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray disc player, etc.), you can connect it to this receiver using a commercially available HDMI cable. 123 Connecting your component with no...
Page 24 - The Input Assign menu
Connecting your equipment 03 24 En Using the component video jacks Component video should deliver superior picture quality when compared to composite video. A further advantage (if your source and TV are both compatible) is progressive-scan video, which delivers a very stable, flicker-free picture. ...
Page 25 - Connecting antennas; Push open the tabs, then insert one wire; Using external antennas; To improve FM reception
Connecting your equipment 03 25 En English Français Español Connecting antennas Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below). 1 Push open the tabs, then insert one wire fully ...
Page 26 - Plug the supplied power cord into the AC
Connecting your equipment 03 26 En Plugging in the receiver Only plug in after you have connected all your components to this receiver, including the speakers. CAUTION • Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when your han...
Page 27 - Basic Setup
Basic Setup 04 27 En English Français Español Chapter 4: Basic Setup Automatically setting up for surround sound (MCACC) The Auto Multi-Channel Acoustic Calibration (MCACC) setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distanc...
Page 29 - Listening to your system; Basic playback
Listening to your system 05 29 En English Français Español Chapter 5: Listening to your system Important • The listening modes and many features described in this section may not be available depending on the current source, settings and status of the receiver. Basic playback Here are the basic inst...
Page 30 - With two channel sources
Listening to your system 05 30 En Auto playback The simplest, most direct listening option is the Auto Surround feature. With this, the receiver automatically detects what kind of source you’re playing and selects multichannel or stereo playback as necessary. 1 • While listening to a source, press A...
Page 31 - With multichannel sources; Using the Advanced surround effects
Listening to your system 05 31 En English Français Español With multichannel sources , you can select from: • DOLBY PLIIz HEIGHT – Up to 7.1 channel sound 1 • Straight Decode – Plays back without the DOLBY PLIIz HEIGHT effects. When the surround back speaker is connected. 2 If you connected surround...
Page 32 - Using Front Stage
Listening to your system 05 32 En • EXT.STEREO – Gives multichannel sound to a stereo source, using all of your speakers. Listening in stereo When you select STEREO you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings...
Page 33 - Using Stream Direct; DIRECT to select Stream Direct mode.; Using the Sound Retriever; Press S.RETRIEVER to switch the sound
Listening to your system 05 33 En English Français Español Using Stream Direct Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unnecessary signal processing is bypassed. • While listening to a source, press AUTO/ DIRECT to select Stream Direct mode...
Page 34 - Press PHASE to switch on phase to switch; Automatically; While listening to a source, press EQ to; Matrix decoding processing for
Listening to your system 05 34 En Phase Control technology provides coherent sound reproduction through the use of phase matching 1 for an optimal sound image at your listening position. The default setting is on and we recommend leaving Phase Control switched on for all sound sources. • Press PHASE...
Page 35 - Setting the Up Mix function; UP MIX OFF
Listening to your system 05 35 En English Français Español • SB AUTO – Matrix decoding processing for generating the surround back component from the surround component is switched automatically. Matrix decoding processing is only performed when surround back channel signals are detected in the inpu...
Page 36 - Setting
Listening to your system 05 36 En Setting What it does Option(s) EQ (Acoustic Calibration EQ) Switches on/off the effect of Acoustic Calibration EQ. ON OFF S.DELAY (Sound Delay) Some monitors have a slight delay when showing video, so the soundtrack will be slightly out of sync with the picture. By ...
Page 37 - amp
Listening to your system 05 37 En English Français Español a. You can change the MIDNIGHT/LOUDNESS options at any time by using MIDNIGHT button. b. You can change the Sound Retriever feature at any time by using S.RETRIEVER button. c. This setting works only with dual mono encoded Dolby Digital and ...
Page 39 - The System Setup menu; Using the System Setup menu
The System Setup menu 06 39 En English Français Español Chapter 6: The System Setup menu Using the System Setup menu The following section shows you how to make detailed settings to specify how you’re using the receiver. It also explains how to fine-tune individual speaker system settings. 1 Press o...
Page 40 - Automatically setting up for surround sound
The System Setup menu 06 40 En Speaker setting Use this setting to specify your speaker configuration (size, number of speakers). It is a good idea to make sure that the settings made in Automatically setting up for surround sound (MCACC) on page 27 are correct. 1 Select ‘SP SET’ from the SP SETUP m...
Page 41 - Crossover network; When the front height speakers are connected:; Speaker distance
The System Setup menu 06 41 En English Français Español Crossover network • Default setting: 100Hz This setting decides the cutoff between bass sounds playing back from the speakers selected as LARGE , or the subwoofer, and bass sounds playing back from those selected as SMALL . 1 It also decides wh...
Page 42 - Using the component
The System Setup menu 06 42 En The Input Assign menu You only need to make settings in the Input Assign menu if you didn’t hook up your equipment according to the default settings for the component video inputs. • Default settings: COMP 1 – BD COMP 2 – DVD If you didn’t make component video connecti...
Page 43 - Using the tuner; Listening to the radio; Saving station presets; Saving station presets
Using the tuner 07 43 En English Français Español Chapter 7: Using the tuner Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. Once you are tuned to a station you can memorize the frequenc...
Page 44 - Naming preset stations; Listening to station presets
Using the tuner 07 44 En 1 Tune to a station you want to memorize. See Listening to the radio on page 43 for more on this. 2 Press TUNER EDIT. The display shows PRESET , then a blinking MEM and station preset. 3 Press PRESET / to select the station preset you want. You can also use the number butt...
Page 45 - An introduction to RDS; Searching for RDS programs
Using the tuner 07 45 En English Français Español An introduction to RDS Radio Data System (RDS) is a system used by most FM radio stations to provide listeners with various kinds of information—the name of the station and the kind of show they’re broadcasting, for example.One feature of RDS is that...
Page 46 - Displaying RDS information
Using the tuner 07 46 En Displaying RDS information Use the DISP button to display the different types of RDS information available. 1 • Press DISP for RDS information. Each press changes the display as follows: • Listening mode• Master volume• Radio Text ( RT ) – Messages sent by the radio station....
Page 47 - Making recordings
Making recordings 08 47 En English Français Español Chapter 8: Making recordings Making an audio or a video recording You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV). 1 Keep in mind you can’t m...
Page 48 - Other connections; ® ADAPTER for; Wireless music play; Remote control operation; This
Other connections 09 48 En Chapter 9: Other connections CAUTION • Before making or changing the connections , switch off the power. Plugging in components should be the last connection you make with your system. • Do not allow any contact between speaker wires from different terminals. Bluetooth ® A...
Page 50 - Listening to Music Contents of; wireless technology; Button
Other connections 09 50 En 6 From the Bluetooth wireless technology device list, select Bluetooth ADAPTER and enter the PIN code selected in the step 4. 1 Listening to Music Contents of Bluetooth wireless technology device with Your System 1 Press ADAPTER on the remote control to switch the receiver...
Page 51 - Additional information; Troubleshooting; Problem
Additional information 10 51 En English Français Español Chapter 10: Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in a...
Page 54 - Symptom; Cable) to connect this receiver to a component or TV with the
Additional information 10 54 En HDMI Symptom Remedy No picture or sound. • If the problem still persists when connecting your HDMI component directly to your monitor, please consult the component or monitor manual or contact the manufacturer for support. No picture. • Video signals that are input fr...
Page 55 - There are cases where you may not be able to; Configuration; Resetting the main unit; Use this procedure to reset all the receiver’s
Additional information 10 55 En English Français Español Important information regarding the HDMI connection There are cases where you may not be able to route HDMI signals through this receiver (this depends on the HDMI equipped component you are connecting-check with the manufacturer for HDMI comp...
Page 56 - Cleaning the unit
Additional information 10 56 En Specifications Audio section Rated power output Front, Center, Surround . . . . . . . . 130 W per channel (1 kHz, 6 Ω , 1 %) . . . . . . . . . . . . . . . . . . . . . . 100 W per channel (20 Hz to 20 kHz, 8 Ω , 0.09 %) Total Harmonic Distortion . . . . . . 0.06 % (20 ...
Page 58 - ATTENTION
Ce point d’exclamation, placé dans un triangle équilatéral, a pour but d’attirer l’attention de l’utilisateur sur la présence, dans les documents qui accompagnentl’appareil, d’explications importantes du point de vue de l’exploitation ou del’entretien. Ce symbole de l’éclair, placé dans un triangle ...
Page 60 - Table des matières; 1 Avant de commencer
4 Fr Nous vous remercions pour cet achat d’un produit Pioneer. Nous vous demandons de lire soigneusement ce mode d’emploi ; vous serez ainsi à même de faire fonctionner l’appareil correctement. Après avoir bien lu le mode d’emploi, le ranger dans un endroit sûr pour pouvoir s’y référer ultérieuremen...
Page 61 - 7 Utilisation du tuner; 0 Informations complémentaires
5 Fr English Français Deutsch Nederlands Italiano Español 07 Utilisation du tuner Pour écouter la radio . . . . . . . . . . . . . . . . . . . 43 Amélioration du son stéréo FM . . . . . . . . . . 43 Mémorisation de stations préréglées . . . . . . 43 Pour écouter les stations préréglées . . . . . . 44...
Page 62 - Organigramme des réglages sur le récepteur; Les couleurs des étapes ont la signification suivante :; Point de réglage nécessaire; Avant de commencer; Raccordement des composants; Mise sous tension; (Lors du raccordement des enceintes avant-; Réglage des préférences de son
6 Fr Organigramme des réglages sur le récepteur Cet appareil est un récepteur AV à part entière présentant un grand nombre de fonctions et de prises. Il peut être utilisé facilement lorsque les raccordements et les réglages mentionnés ci-dessous ont été effectués. Les couleurs des étapes ont la sign...
Page 63 - Mise en place des piles; Installation du récepteur
7 Fr English Français Deutsch Nederlands Italiano Español Chapitre 1 : Avant de commencer Vérification des accessoires livrés avec l’appareil Veuillez vérifier que les accessoires suivants sont livrés avec l’appareil : • Microphone de configuration• Télécommande • Piles à anode sèche AAA IEC R03 (po...
Page 64 - En installant cet appareil, veuillez vous assurer; Récepteur
8 Fr Ventilation En installant cet appareil, veuillez vous assurer de bien laisser un espace de ventilation suffisant autour afin de permettre une meilleur dispersion de la chaleur (au moins 40 cm sur le dessus). Si l’espace entre l’appareil et le mur ou un autre appareil est insuffisant, la chaleur...
Page 65 - Commandes et affichages; Panneau frontal; Portée de
9 Fr English Français Deutsch Nederlands Italiano Español Chapitre 2 : Commandes et affichages Panneau frontal 1 STANDBY/ON 2 Cadran INPUT SELECTOR Permet de sélectionner une source d’entrée. 3 Témoin MCACC S’allume lorsque Acoustic Calibration EQ (page 34) est sélectionné (Acoustic Calibration EQ...
Page 66 - Lecture en mode Auto; Portée de la télécommande
10 Fr PRESET / Ces touches permettent de sélectionner des stations de radio préréglées (page 43). 8 Cadran MASTER VOLUME 9 Voir la section PHONES Permet de raccorder un casque. Lorsque le casque est branché, les enceintes ne fournissent aucun son (page 38). 10 Touches de mode d’écoute AUTO/DIRECT ...
Page 67 - Affichage; Lecture en mode
11 Fr English Français Deutsch Nederlands Italiano Español Affichage 1 PHASE S’allume lorsque la touche Phase Control est sélectionnée (page 33). 2 AUTO S’allume lorsque l’option Auto Surround est sélectionnée (voir la section Lecture en mode Auto à la page 30). 3 RDS S’allume lors de la réception d...
Page 69 - Télécommande
13 Fr English Français Deutsch Nederlands Italiano Español Télécommande Les codes de la télécommande sont préréglés pour les produits Pioneer si vous souhaitez commander d’autres appareils. Les réglages ne peuvent pas être modifiés. 1 SLEEP Appuyez sur cette touche pour modifier le délai qui s’écoul...
Page 72 - Installation des enceintes; ) pour réaliser un système; détails, voir la section
16 Fr Chapitre 3 : Raccordement de votre équipement Installation des enceintes Un système surround de type 5.1 canaux peut être obtenu en connectant les enceintes avant gauche et droite ( L / R ), l’enceinte centrale ( C ), les enceintes surround gauche et droite ( SL / SR ) et le subwoofer ( SW ). ...
Page 73 - Conseils d’installation des enceintes; Réglage de la fonction Up; Connectez; Configuration de l’option Pre Out
17 Fr English Français Deutsch Nederlands Italiano Español Conseils d’installation des enceintes L’emplacement des enceintes dans la pièce d’écoute a une grande influence sur la qualité du son obtenu. Les conseils suivants vous permettront d’obtenir le meilleur son avec votre système. • Le caisson d...
Page 74 - Raccordement des enceintes; ) et que l’enceinte gauche est; Branchement des fils nus; Bornes des enceintes avant :
18 Fr Raccordement des enceintes Le récepteur fonctionnera avec seulement deux enceintes stéréo (les enceintes avant sur le schéma), mais il est recommandé d’en utiliser au moins trois ; une configuration complète de huit enceintes est cependant idéale pour la production du son surround. Vérifiez qu...
Page 75 - tension HAZARDOUS LIVE; Raccordements des câbles
19 Fr English Français Deutsch Nederlands Italiano Español ATTENTION • Les bornes des haut-parleurs sont sous une tension HAZARDOUS LIVE . Pour éviter tout risque de décharge électrique lors du branchement et du débranchement des câbles de haut-parleur, débranchez le cordon d’alimentation avant de t...
Page 76 - Câble HDMI; Câbles audio analogiques
20 Fr Câbles HDMI Les signaux vidéo et audio peuvent être transmis simultanément via un seul câble. Dans le cas où le lecteur et le téléviseur sont connectés via cet appareil, utilisez des câbles HDMI pour les deux connexions. 1 Veillez à raccorder la borne dans le sens qui convient. À propos de HDM...
Page 77 - Câbles audio numériques
21 Fr English Français Deutsch Nederlands Italiano Español Câbles audio numériques Les câbles audio numériques coaxiaux ou les câbles optiques disponibles dans le commerce doivent être utilisés pour raccorder les appareils numériques au récepteur. 1 Câbles vidéo Câbles vidéo RCA standard Ces câbles ...
Page 78 - Raccordement d’un téléviseur et de périphériques de lecture; Si vous avez un composant équipé d’une prise
22 Fr Raccordement d’un téléviseur et de périphériques de lecture Connexion au moyen de l’interface HDMI Si vous avez un composant équipé d’une prise HDMI ou DVI (avec HDCP) (Lecteur de disque Blu-ray, etc.), vous pouvez le raccorder à ce récepteur à l’aide d’un câble HDMI disponible dans le commerc...
Page 81 - Raccordement des antennes; Poussez sur les languettes pour les ouvrir,; Utilisation des antennes externes; Pour améliorer la réception FM
25 Fr English Français Deutsch Nederlands Italiano Español Raccordement des antennes Raccordez l’antenne cadre AM et l’antenne filaire FM comme indiqué ci-dessous. Pour améliorer la réception et la qualité du son, raccordez les antennes externes (consultez Utilisation des antennes externes ci-dessou...
Page 82 - Branchement du récepteur; Enfichez le cordon d’alimentation fourni
26 Fr Branchement du récepteur Ne raccordez le récepteur au secteur qu’après y avoir connecté tous les composants, y compris les haut-parleurs. ATTENTION • Tenez le cordon d’alimentation par sa prise lorsque vous le manipulez. Ne débranchez pas l’appareil en tirant sur le cordon et ne touchez jamais...
Page 83 - Configuration de base
27 Fr English Français Deutsch Nederlands Italiano Español Chapitre 4 : Configuration de base Configuration automatique du son surround (MCACC) Le système de calibrage acoustique multicanaux (Multi-Channel Acoustic Calibration, MCACC) mesure les caractéristiques acoustiques de votre position d’écout...
Page 85 - Lecture de base
29 Fr English Français Deutsch Nederlands Italiano Español Chapitre 5 : Écoute de sources à l’aide de votre système Important • Les modes d’écoute et de nombreuses fonctions décrites dans la présente section peuvent ne pas être disponibles en fonction de la source, des paramètres et de l’état actuel...
Page 86 - avec les
30 Fr Lecture en mode Auto La fonction Auto Surround correspond à l’option d’écoute en mode direct la plus simple. Grâce à cette fonction, le récepteur détecte automatiquement le type de source que vous écoutez et sélectionne un mode de lecture multicanaux ou stéréo selon les besoins. 1 • Au moment ...
Page 88 - Écoute en mode stéréo; Utilisation de la fonction Front Stage
32 Fr • UNPLUGGED – Convient à la reproduction de sources musicales acoustiques. • EXT.STEREO – Permet de recréer un son multicanaux à partir d’une source stéréo, en utilisant toutes vos enceintes. Écoute en mode stéréo Lorsque vous sélectionnez STEREO , la source est seulement reproduite sur les en...
Page 89 - Lors de l’écoute d’une source, appuyez
33 Fr English Français Deutsch Nederlands Italiano Español Utilisation des modes Stream Direct Les modes Stream Direct permettent de reproduire une source de la manière la plus fidèle possible. Toutes les fonctions de traitement de signal non nécessaires sont contournées. • Lors de l’écoute d’une so...
Page 90 - Appuyez sur PHASE pour activer ou; Lorsque vous écoutez une source,
34 Fr La technologie Phase Control garantit une reproduction cohérente du son, grâce à l’utilisation de la correspondance de phase 1 qui permet d’obtenir une image sonore optimale à la position d’écoute. La fonction Phase Control est activée par défaut et nous vous recommandons de la laisser activée...
Page 91 - Réglage de la fonction Up Mix
35 Fr English Français Deutsch Nederlands Italiano Español • SB AUTO – La fonction de décodage matriciel (Matrix) pour générer l’équipement surround arrière à partir de l’équipement surround est activée automatiquement. Le décodage matriciel n’est effectué que si des signaux surround arrière sont dé...
Page 93 - Paramètre
37 Fr English Français Deutsch Nederlands Italiano Español a. Les options MIDNIGHT/LOUDNESS peuvent être modifiées à tout moment à l’aide de la touche MIDNIGHT . b. Vous pouvez modifier à tout moment la fonction Sound Retriever à l’aide de la touche S.RETRIEVER . c. Ce réglage fonctionne uniquement ...
Page 95 - Réglage manuel des enceintes
39 Fr English Français Deutsch Nederlands Italiano Español Chapitre 6 : Menu de configuration du système Utilisation du menu de configuration du système La section suivante décrit de façon détaillée comment effectuer les réglages adaptés à votre propre utilisation du récepteur. Elle explique égaleme...
Page 96 - Distance des enceintes; Réglage des enceintes
40 Fr • SP DISTN – Définit la distance entre la position d’écoute et vos enceintes (voir la section Distance des enceintes à la page 41). 3 Appuyez sur la touche RETURN après avoir procédé aux modifications nécessaires pour chaque réglage. Réglage des enceintes Utilisez ce réglage pour définir la co...
Page 97 - Fréquence de coupure; Astuce
41 Fr English Français Deutsch Nederlands Italiano Español dirigées vers le subwoofer). Si vous n’avez pas raccordé de subwoofer, sélectionnez NO (les fréquences graves seront émises par les autres enceintes). Fréquence de coupure • Réglage par défaut : 100Hz Ce réglage établit une coupure entre les...
Page 98 - Menu d’affectation d’entrée
42 Fr Menu d’affectation d’entrée Il vous suffit d’effectuer des réglages dans le menu Input Assign si vous n’avez pas raccordé votre équipement selon les réglages par défaut pour les entrées vidéo en composantes. • Réglages par défaut : COMP 1 – BD COMP 2 – DVD Si vos raccordements vidéo en composa...
Page 99 - Utilisation du tuner; Mémorisation de stations préréglées; Amélioration du son stéréo FM; Pour écouter la radio
43 Fr English Français Deutsch Nederlands Italiano Español Chapitre 7 : Utilisation du tuner Pour écouter la radio Les étapes suivantes décrivent la façon de régler les bandes FM et AM à l’aide de la recherche automatique et des fonctions de réglage manuel. Lorsque vous avez réglé une station, vous ...
Page 100 - Pour écouter les stations préréglées; Mémorisation; Présentation du système RDS
44 Fr 2 Appuyez sur la touche TUNER EDIT. L’écran affiche PRESET , puis un MEM clignotant et une station préréglée. 3 Appuyez sur la touche PRESET / pour sélectionner la station préréglée que vous désirez. Pour cela, vous pouvez aussi utiliser les touches numériques. 4 Appuyez sur la touche ENTER....
Page 101 - Recherche de programmes RDS
45 Fr English Français Deutsch Nederlands Italiano Español Vous pouvez rechercher les types de programmes suivants : 1 Recherche de programmes RDS Vous pouvez rechercher un type de programme répertorié ci-dessus. 1 Appuyez sur TUNER puis sur BAND pour sélectionner la bande FM. 2 2 Appuyez sur la tou...
Page 102 - Enregistrement; Raccordement de votre équipement
46 Fr Chapitre 8 : Enregistrement Enregistrer un contenu audio ou vidéo Vous pouvez enregistrer un contenu audio ou vidéo à partir du syntoniseur intégré ou d’une source audio ou vidéo raccordée au récepteur (un lecteur de CD ou un téléviseur par ex.). 1 Gardez à l’esprit qu’il n’est pas possible d’...
Page 103 - Autres raccordements; ADAPTATEUR; Lecture de musique sans fil; Fonctionnement par télécommande
47 Fr English Français Deutsch Nederlands Italiano Español Chapitre 9 : Autres raccordements ATTENTION • Mettez cet appareil hors tension, ainsi que tous les autres équipements/périphériques , avant d’effectuer ou de modifier les raccordements. Vous devez d’abord avoir effectué tous les raccordement...
Page 104 - Appairage de l’ADAPTATEUR
48 Fr Raccordement de l’ADAPTATEUR Bluetooth optionnel • Mettez cet appareil hors tension, ainsi que tous les autres équipements/périphériques, avant d’effectuer ou de modifier des raccordements. 1 Mettez l’appareil en mode veille et connectez la adaptateur Bluetooth à la borne ADAPTER PORT située s...
Page 105 - Touche
49 Fr English Français Deutsch Nederlands Italiano Español 6 Dans la liste des périphériques sans fil Bluetooth , sélectionnez l’ADAPTATEUR Bluetooth et entrez le code PIN choisi à l’étape 4. 1 Écoute de musique avec votre système à partir d’un équipement sans fil Bluetooth 1 Appuyez sur la touche A...
Page 106 - Informations complémentaires; Guide de dépannage; Problème éventuel; MUTE; de la télécommande pour désactiver la; pour sélectionner le bon signal d’entrée (voir; MULTI
50 Fr Chapitre 10 : Informations complémentaires Guide de dépannage Une utilisation incorrecte de l’appareil est souvent interprétée comme un problème ou un dysfonctionnement. Si vous êtes convaincu que cet appareil ne fonctionne pas correctement, contrôlez les points ci-dessous. Quelquefois, le pro...
Page 109 - Symptôme; Pas d’image ni de son.
53 Fr English Français Deutsch Nederlands Italiano Español HDMI Symptôme Réparation possible Pas d’image ni de son. • Si le problème persiste lorsque vous connectez directement votre composant HDMI à votre moniteur, reportez-vous au manuel du composant ou du moniteur ou prenez contact avec le servic...
Page 110 - Mettez le récepteur en mode de veille.
54 Fr Information importante concernant la connexion HDMI Dans certains cas, il ne sera peut-être pas possible d’acheminer les signaux HDMI via ce récepteur (ceci dépend du composant HDMI que vous connectez - contrôlez les informations du fabricant concernant la compatibilité HDMI).Si vous ne receve...
Page 111 - Spécifications; Nettoyage de l’appareil
55 Fr English Français Deutsch Nederlands Italiano Español Spécifications Section audio Puissance nominale de sortie Avant, Centrale, Surround . . . . . . . . . . 130 W par canal (1 kHz, 6 Ω , 1 %) . . . . . . . . . . . . . . . . . . . . . . . . 100 W par canal (20 Hz à 20 kHz, 8 Ω , 0,09 %) Distors...
Page 114 - System Setup
4 Ru Pioneer. , , . , . . . . . . . . . . . . . . . . . . . . . . . . . 6 01 . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . . . . . . . . . 8 02 . . . . . . . . . . . . . . . . . . . . . . . ...
Page 116 - MCACC; Sound Retriever
6 Ru - , . . Ц : , 1 • ( . 7) • ( . 7) 2 . , . • ( . 16) • ( . 18) • ( . 19) : . 3 BD/DVD . • ( . 21) • ( . 22) • ( . 25) • ( . 26) Передний левый (L (Л)) *Передний верхний левый (FHL) *Передний верхний правый (FHR) Левый объемного звучания (LS (ЛO)) *Левый тыловой канал (SBL) *Правый ...
Page 119 - Acoustic
9 Ru English Français Deutsch Nederlands Italiano Español 2: 1 STANDBY/ON 2 Pery INPUT SELECTOR . 3 MCACC , Acoustic Calibration EQ ( . 34) ( «Acoustic Calibration EQ» « .» MCACC ( . 27)). 4 ( . Д . 10). 5 SPEAKERS / . SP OFF , , . DIMMER . . DISPLAY . , , , . 1 6 . Д . 11. 7 BAND AM, FM ...
Page 121 - RDS; PRESET; EXPRESS
11 Ru English Français Deutsch Nederlands Italiano Español 1 PHASE , ( . 33). 2 AUTO ( . . 30). 3 RDS RDS ( . 45). 4 ST FM . 5 TUNE . 6 , ( . 9). SP A , . SP , . 7 , ( . 13). 8 PRESET . MEM , . 9 PRESET . . 10 . 11 DTS DTS DTS. HD DTS- EXPRESS DTS-HD. ES DTS-ES. 96/24 DTS 96/24. NEO:6 NEO:6 ...
Page 122 - DIMMER
12 Ru 2 HD Dolby TrueHD. EX Dolby Digital EX. 2 PLll(x) 2 Pro Logic II / 2 Pro Logic IIx. 2 Pro Logic IIz ( . . 30). 13 ADV.S. Э ( . . 31). 14 SIGNAL SELECT DIGITAL , . , . HDMI , HDMI. , HDMI, HDMI . 15 Up Mix/DIMMER , Up Mix ON ( . . 35). , DIMMER . 16 DIR. , DIRECT PURE DIRECT ( . 33). VSX-520_SY...
Page 123 - Pioneer
13 Ru English Français Deutsch Nederlands Italiano Español Pioneer . Э . 1 SLEEP ( 30 min – 60 min – 90 min – Off ( .) ). SLEEP . 2 RECEIVER . 3 ( : MIDNIGHT . .). ( . 39) ( . 35). 4 INPUT SELECT . 5 MULTI CONTROL . 6 EQ / Acoustic Calibration EQ ( . 34). PHASE / ( . 33). S. RETRIEVER CD ( . 3...
Page 125 - CD
15 Ru English Français Deutsch Nederlands Italiano Español 11 CD . . ( , MIDNIGHT ( ) .) HDD *, DVD *, VCR * HDD/DVD/VCR- , DVD VCR. SB CH ON , AUTO , OFF . CH SELECT , LEV +/– ( . 41). LEV +/– . MIDNIGHT Midnight ( ) Loudness ( ) ( . 35). SPEAKERS / . SP OFF , , . DIMMER . . 12 SOURCE Pioneer D...
Page 127 - Up Mix; FRONT HEIGHT
17 Ru English Français Deutsch Nederlands Italiano Español P . . • . . ( ) . • 2–3 . • Э - , Э - . • , . – . • , . , , . • . . . • 60–90 . , . DVD-Audio . • 7.1- , , Up Mix ( . Up Mix . 35). • , . . • . • . Э , ( , ). • , . PRE OUT SURR BACK/ FRONT HEIGHT ( . . 19). , . SURR.BACK , , HEIGHT , ( , , ...
Page 130 - Кабель HDMI
20 Ru HDMI -, . , HDMI. 1 . HDMI HDMI , , , DVD-Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio ( . ), Video CD/Super VCD CD. High- Definition Multimedia Interface (HDMI ® ). HDMI . 2 • ( , HDCP (1080p/24, 1080p/60, .)) • 3D 3 • Deep Color 3 • x.v.Color 3 • PCM (192 ) ....
Page 131 - RCA
21 Ru English Français Deutsch Nederlands Italiano Español . 1 RCA Э . . . , ( Y ) ( P B P R ). . . HDMI, . , ( ) , HDMI OUT . 1 • , . • . . • RCA. VIDEO IN P R P B Y COMPONENT VIDEO IN HDMI IN MONITOR OUT P R P B Y COMPONENT VIDEO MONITOR OUT HDMI OUT . VSX-520_SYXCN_Ru.book 21 ページ 年4月 日 月曜日 午後9時 分
Page 135 - o 6
25 Ru English Français Deutsch Nederlands Italiano Español FM, . ( . ). 1 , , AM. 2 AM . , ( . ), ( . ). 3 AM . 4 FM FM. , FM . , . FM FM- PAL- ( ). AM 5 o 6 AM , AM. . ANTENNA AM LOOP 2 1 3 4 рис. а рис. б ANTENNA FM UNBAL 75 Ω AM LOOP 75 Ω PAL ANTENNA FM UNBAL 75 Ω AM LOOP 5 6 ( ) VSX-520_SYXCN_...
Page 136 - AC IN
26 Ru ( ). • . , , , . , - . . , . . . , - Pioneer. • , . • , . • ( , ), , . 1 , , AC IN . 2 . VSX-520_SYXCN_Ru.book 26 ページ 年4月 日 月曜日 午後9時 分
Page 141 - Dolby
31 Ru English Français Deutsch Nederlands Italiano Español • DOLBY PLIIz HEIGHT – 7.1- 1 • NEO:6 CINEMA – . e • NEO:6 MUSIC – . e • DOLBY PRO LOGIC – . e • – DOLBY PLII , DOLBY PLIIz HEIGHT NEO:6 . , : • DOLBY PLIIz HEIGHT – 7.1- 1 • – DOLBY PLIIz HEIGHT . . 2 , . . 34. , : • DOLBY PLIIx MOVIE – , 7...
Page 143 - Stream; Surround Setup; PCM; Sound; Phase Control
33 Ru English Français Deutsch Nederlands Italiano Español Stream Direct ( ) Stream Direct ( ), , . . • Stream Direct ( ) AUTO/DIRECT . • AUTO SURROUND – . . 30 • DIRECT – Surround Setup ( , , ), . 1 . • PURE DIRECT – PCM . Sound Retriever ( ) , . Sound Retriever ( ) DSP, CD 2- , . 2 • S...
Page 144 - SB
34 Ru , 1 . , Phase Control ( ) . • PHASE / . , , , (MCACC) . 27. . • , EQ / Acoustic Calibration EQ ( ). MCACC . 2 6.1 7.1 6.1 ( , Dolby Digital EX DTS-ES), 6.1 7.1 ( , 5.1). 5.1 , 5.1, ( ). • 7.1 , , up-mix, . • SB CH. : • SB ON – . 1 . « », , , . ( , ) « » . • , « » (+) ( 0°). ,...
Page 147 - Dolby Digital DTS.
37 Ru English Français Deutsch Nederlands Italiano Español a. MIDNIGHT/LOUDNESS ( / ) , MIDNIGHT . b. Sound Retriever ( ) S.RETRIEVER . c. Э , Dolby Digital DTS. d. AUTO Dolby TrueHD. , Dolby TrueHD, MAX MID . e. SACD , , - 0 . f. Э , / (« ») HDMI. , , A.DLY OFF . . g. DOLBY PLII MUSIC . h. 2- NEO:6...
Page 148 - Dolby Digital
38 Ru , . 1 • SIGNAL SEL ( ), , - . DIGITAL ( C1 / O1 / O2 ) HDMI ( H ), , A ( ). : • A – . • DIGITAL – . C1 1, O1 O2 1 2. • HDMI – HDMI . H BD, DVD TV/SAT. HDMI . 2 DIGITAL HDMI , Dolby Digital 2 , DTS – DTS. HDMI , A DIGITAL ( . . 12). • PHONES. , . , STEREO ALC . 1 • ( ), Dolby Digital, PCM ( 32 ...
Page 149 - System; Crossover
39 Ru English Français Deutsch Nederlands Italiano Español 6: System Setup ( ) System Setup ( ) . . 1 ( ) , SETUP. 2 / , , , ENTER . • A.MCACC – ( . (MCACC) . 27). • SP SETUP – , , ( . ). • IN ASSIG – , ( . . 42). • PRE OUT – , PRE OUT ( . . 42). Э . Э ( ). Э , , (MCACC) . 27, . • , , . • PR...
Page 153 - FM AM
43 Ru English Français Deutsch Nederlands Italiano Español 7: FM AM ( ) ( ) . , . . e. 1 TUNER . 2 BAND BAND (FM AM). FM ( ) AM. 3 . Э , . TUNE / . , . . TUNE / . TUNE / . . FM FM- TUNE ST - , BAND FM MONO . , . , , . Э , . 30 . 1 1 , . . . 43. BD DVD TV CH DVR CD CD-R ADAPTER ...
Page 157 - MULTI CONTROL
47 Ru English Français Deutsch Nederlands Italiano Español 8: - - , , ( , - ). 1 , , , , , ( . . 16). , . , - , , ( . 23). 1 , . MULTI CONTROL ( INPUT SELECTOR ). 2 ( ). , SIGNAL SEL , , - ( . . 38 ). 3 , . , - , , DVD . . 4 / . , - , . . . 2 , , . , . . , , . 5 , - . 1 , . , - , , ( HDD/DVD...
Page 159 - ENTER; NODEVICE
49 Ru English Français Deutsch Nederlands Italiano Español Bluetooth • , . 1 Bluetooth ADAPTER PORT, . 2 . 3 ADAPTER ADAPTER. 1 Bluetooth Bluetooth « » Bluetooth Bluetooth . « » , . « » – , Bluetooth Bluetooth . 2 Bluetooth . 1 TOP MENU. 2 ENTER PAIRING. 3 0000/1234/8888 / PIN- , , ENTER. ...
Page 165 - OK
55 Ru English Français Deutsch Nederlands Italiano Español HDMI HDMI ( HDMI , HDMI). HDMI ( ), . 1 HDMI HDMI. ( ) . . . . ( ) , . . 1 . 2 BAND, STANDBY/ON . 3 RESET? ( ?) AUTO/ DIRECT. OK? . 4 STEREO/ALC. OK , , . 1 • HDMI, . • , , ( , , ). • . • HDMI , . VSX-520_SYXCN_Ru.book 55 ページ...
Page 166 - LINE Pure; Pioneer Corporation.
56 Ru , , . . . . . . . . . . . 130 (1 , 6 Ω , 1 %) . . . . . . . . . . . . . . . . . . . . . . . . . . 100 (20 20 , 8 Ω , 0,09 %) . . . . 0,06 % (20 20 , 8 Ω , 95 / .) ( LINE Pure Direct) . . . . . . . . . . . . . . . . . . . . 5 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 168 - PIONEER CORPORATION; PIONEER EUROPE NV
<5707-00000-312-1S> Published by Pioneer Corporation. Copyright © 2010 Pioneer Corporation. All rights reserved. Publication de Pioneer Corporation. © 2010 Pioneer Corporation. Tous droits de reproduction et de traduction réservés. Printed in China Imprimé en Chine Примечание: В соответствии с...