Pioneer SRS55TB - User Manual

1

En

Thank you for buying this Pioneer product.

Please read through these operating instructions before using your

speaker system to optimize performance.

WHAT'S IN THE BOX

1

3

2

5

4

1. Front speakers (2)

2. Surround speakers (2)
3. Center speaker (1)
4. Speaker cables

Center speaker (1) (2 m, Tie color: Red)

Front speakers (2) (3 m, Tie color: Black)

Surround speakers (2) (10 m, Tie color: Blue)

5. Non-skid pads (1) (20 pcs)

• Operating Instructions (This manual)

BEFORE USE

• These speakers have a rated impedance of 8 Ω. Use an

amplifier that supports speakers with an impedance of 8 Ω.

• In order to prevent damage to the speaker system resulting

from input overload, please observe the following precautions:

– Do not input above the permissible input.

– When connecting this unit and other AV devices to an

amplifier, turn the amplifier off first.

– When amplifying the treble with a graphic equalizer, do not

increase the volume too much.

– Do not output loud volumes through a low output amplifier.

(The harmonic distortion of the amplifier will increase, and

there is a possibility of damage to the speakers.)

• Do not use the speaker to output distorted sound for long

periods of time. This can result in a fire hazard.

• Do not install these units near a stove or other heating

appliance, or put them in a place exposed to the sun. Such

locations may cause the cabinet to change color and the

speaker system to break down.

• Do not attach the front and center speakers to the wall or

ceiling. It may fall off and cause injury.

• These speakers are not equipped with magnetic shielding.

Do not put items easily affected by magnetism (cards with

magnetic tape, etc.) near this unit.

• Some color irregularity or distortion may occur on a cathode

ray tube television (CRT television) if you use one near this

unit. Separate these speakers further from the television if this

occurs.

PLACEMENT AND FINE TUNING

STANDARD SURROUND SETUP

This is a standard multichannel surround sound speaker setup for

optimal 5.1 channel home theater sound.

1, 2. Front Speakers

3.

Center Speaker

4, 5. Surround Speakers

6. Subwoofer

Front Speakers

For best results the speakers should be separated a distance

approximately equal to the listening distance. Angling the speakers

inward towards the listener will improve the image stability for

non-central listeners. Close proximity to a side or rear wall will

enhance the midbass performance, although too close (particularly

a corner location) and the bass may be unnaturally high and image

performance may be degraded.

Center Speaker

The speaker should be positioned below the TV. For best results

align the front of the speaker with the front of the TV. If the speaker

is placed under the TV and very close to the floor, then tilting

upwards may be beneficial.

Do not place the center speaker on top of TV, the speaker may

fall from the TV due to external shocks such as earthquakes,

endangering those nearby or damaging the speaker.

Operating Instructions

Speaker System

S-RS55TB

S-RS55TB_EnEs.indb 1

2017/08/24 13:39:08