Pioneer SX10AE - Manuals

6 Rear Panel 1. FM UMBAL 75 Ω /AM LOOP ANTENNA terminals: Connect the supplied FM indoor antenna and AM indoor antenna. 2. PRE OUT SUBWOOFER jack: Connect a powered subwoofer with a subwoofer cable.3. SPEAKERS jacks: Connect speakers with speaker cables. You can connect a set of left and right speak...

7 En Remote Controller 1. Í STANDBY/ON button 2. SLEEP button: Set the sleep timer (P20).3. INPUT SELECTOR buttons: Switches the input to be played.4. Numbered buttons5. DIRECT TUNING button: Use to select the number of a preset station or to directly input the frequency of the station. 6. button: T...

8 Install Step1: Connect the Speakers You can connect two systems, Speaker A and Speaker B, as the Speaker System. When connecting only one set, connect to the SPEAKERS A terminals. With one set, use speakers with 4 ≠ to 16 ≠ impedance. Note that when connecting to both SPEAKERS A and B terminals, c...

9 En Step2: Connect an other External Device AUDIO IN connection Connect an other external device with an analog audio cable. > Before Start > Part Names > Install > Playback Setup | Others CD a Network Audio Player a Analog Audio Cable SN29403247_SX-10AE_En_1707XX.book 9 ページ ２０１７年７月１９日　...

10 Step3: Connect Other Cables Antenna Hookup Move the antenna around while playing the radio to find the position with the best reception. Power Cord Hookup The power cord must be connected only after all other connections are completed. > Before Start > Part Names > Install > Playback ...

11 En Playback Playing Audio from a Connected Device Basic Operations You can play the audio from other external devices such as CD players through this unit. Perform the following procedure when the unit is on.1. Press the input selector button (a) on the remote controller with the same name as the...

12 BLUETOOTH ® Playback You can wirelessly play music on a smartphone or other BLUETOOTH wireless technology enabled device. Perform the following procedure when the unit is on. Pairing 1. When you press (a), "Now Pairing..." is displayed on this unit's display, and the pairing mode is enabl...

13 En > Before Start > Part Names > Install > Playback Setup | Others Listening to the AM/FM Radio You can receive AM/FM radio stations on this unit with the built-in tuner. Perform the following procedure when the unit is on. ∫ Tuning into a Radio Station Tuning Automatically The unit i...

15 En Registering a Station You can register up to 40 of your favorite radio stations. Registering After tuning into the radio station you want to register, perform the following procedure.1. Press MEMORY on the main unit so that the preset number on the display flashes. 2. While the preset number i...

16 Naming Radio Stations Registered as Presets You can enter names of up to 8 characters for the stations you have preset. Uses the following procedure. 1. After pressing AM or FM on the remote controller, select a preset number. 2. After pressing SETUP on the remote controller, use the cursor Up/Do...

17 En Adjusting the Sound Quality By pressing BASS, TREBLE, etc. on the remote controller during play, you can adjust frequently used settings, such as the sound quality. 0 BALANCE adjustments can only be made with the buttons on the main unit. ∫ BASS (a) Enhance or moderate the bass range of the sp...

18 Setup Setup Menu The unit allows you to configure advanced settings to provide you with an even better experience.1. Press SETUP (b) on the remote controller. 2. Select the item with the Up/Down buttons (a) on the remote controller and press ENTER (d) to confirm your selection. 3. Select the subm...

> Before Start > Part Names > Install > Playback Setup | Others 19 En "4 ohm": When any of the connected speakers have 4 ≠ or more to less than 6 ≠ impedance, or when speaker systems are connected to both of the SPEAKERS A/B terminals"6 ohm (default value)": When the conn...

20 > Before Start > Part Names > Install > Playback Setup | Others Sleep Timer You can make the unit enter standby automatically when the specified time elapses.1. Press SLEEP on the remote controller to display the time to set on the display. 0 Press SLEEP repeatedly on the remote contr...

21 En Others Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected...

23 En General Specifications Amplifier (Audio) section Rated Output Power (FTC) (North American) 0 With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 45 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. 0 With ...