Philips 32PDL7906H - Manual

EN 6 3D TV This is a 3D TV. Connect your TV to a 3D Blu-ray disc player or tune in to a TV channel that broadcasts programmes in 3D. Read more in Use your TV > Watch 3D (Page 18 ). Important Safety Read and understand all instructions before you use your TV. If damage is caused by failure to foll...

EN 7 En gl is h  Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.  Parts of this product may be made of glass. Handle with care to avoid injury and dam...

EN 8  To avoid discomfort such as dizziness, headache or disorientation, we recommend not watching 3D for extended periods of time. If you experience any discomfort, stop watching 3D and do not immediately engage in any potentially hazardous activity (for example driving a car) until your symptoms ...

EN 9 En gl is h End of use Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please infor...

EN 10 Wall mount Warning: Follow all instructions provided with the TV mount. TP Vision Netherlands B.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. Before you mount the TV:  Purchase a Philips TV mount or a compatible TV mount.  For certain models,...

EN 11 En gl is h  email us a specific question  chat online with one of our support personnel (available in certain countries only) Contact Philips If you like, you can contact Philips Consumer Care in your country for support. You can find the contact number in the leaflet accompanying the TV. Be...

EN 12 2 Use your TV Controls TV controls 1. +/-: Increase or decrease volume. 2. AMBILIGHT : Switch Ambilight on or off. 3. ( Home ): Access the Home menu. Press again to launch an activity in the Home menu. Confirm an entry or selection. 4. CH +/- : Switch to the next or previous channel. 5.Power :...

EN 13 En gl is h 4. ( Home ): Access the Home menu. 5. ( Navigation buttons ): Navigate through menus and select items. 6. CH - / CH + ( Previous/Next ): Switch channels, navigate through menu pages, tracks, albums or folders. 7. OK : Confirm an entry or selection. 8. ( Back ): Return to the previou...

EN 14 Access EasyLink controls 1. While you view content from a connected HDMI-CEC device, press OPTIONS . 2. Select [Show device keys] , then press OK . 3. Select the EasyLink control button, then press OK . Read more on EasyLink in Use more of your TV > Use EasyLink (Page 34 ). Smartphone contr...

EN 15 En gl is h  Press +/- on the front of the TV. Mute or unmute the TV volume  Press to mute the TV, or  Press again to restore the volume. Adjust headphone volume 1. Press > [Setup] > [TV settings] > [Sound] . 2. Select [Headphones volume] , then press OK . Switch TV channels  Press...

EN 17 En gl is h  [Super zoom] : Remove the black bars on the sides of 4:3 broadcasts. Not recommended for HD or PC.  [Movie expand 16:9] : Scale 4:3 format to 16:9. Not recommended for HD or PC.  [Wide screen] : Stretch 4:3 format to 16:9.  [Unscaled] : Provide maximum detail for PC. Only avail...

EN 18  To skip to the previous or next file, press or .  Press and hold to exit content browser. Press OPTIONS to access or exit the following picture options:  [Show info] : Display the file information.  [Stop] : Stop slideshow.  [Rotate] : Rotate the file.  [Repeat] : Repeat the slideshow. ...

EN 19 En gl is h Note: The 2D/3D menu is only available when the TV receives 3D content from the input signal, or when [3D format] has been set to [3D - Side by side] or [3D - Top / bottom] . Optimal 3D viewing For an optimal 3D viewing experience, we recommend that you:  sit at a distance that is ...

EN 20 1. While you watch TV, press > [Setup] . 2. Select [TV settings] > [Ambilight] . 3. Select a setting to adjust:  [Dynamic] : Adjust Ambilight between relaxed and dynamic levels. Available only if Ambilight [Colour] is set to [Dynamic] .  [Brightness] : Adjust the brightness of Ambiligh...

EN 21 En gl is h  The first time you select Media Sharing , a pop-up screen appears. Tick the Share my media box and click OK .  A device marked as Unknown Device appears in the Media Sharing screen. If the unknown device does not appear after a minute or so, make sure that your PC firewall is not...

EN 22  To play the previous or next file, press or . Press OPTIONS to access one of the following options:  [Show info] : Display the file information.  [Stop] : Stop slideshow.  [Rotate] : Rotate the file.  [Repeat] : Repeat the slideshow. Net TV and online video What you can do Enjoy Internet...

EN 23 En gl is h A prompt asks if you want to lock adult services. 5. To lock adult services, select [Lock] , then press OK . To leave adult services unlocked, select [Leave unlocked] , then press OK . 6. To lock, enter a 4-digit code, then press OK . 7. Re-enter the 4-digit code, then press OK . Th...

EN 25 En gl is h If you cancel a download, you can still download the video until the rental period expires. Watch video 1. Press , select [Browse Net TV] . The installed video stores are displayed. 2. Select the video store where you rented the video, then press OK . 3. With your log-in information...

EN 27 En gl is h 3 Use more of your TV Pause TV What you can do While watching a digital channel, you can pause a programme to answer an urgent phone call or to have a break. The broadcast is stored on a USB hard disk that is connected to the TV; you can replay the broadcast instantly. Note:  The m...

EN 28 Pause a live TV broadcast 1. On a digital channel, press (pause) to pause a TV broadcast. 2. Press (play) to continue watching. The status bar shows the following time indicators: A. When the programme is paused for the first time. B. Where the paused programme is currently playing. C. Where t...

EN 30 3. If needed, adjust the recording time to add a buffer at the end of the programme. Select [Schedule] and press OK . The programme is scheduled for recording. A warning displays automatically when overlapping recordings are scheduled. If you plan to record a programme during your absence, rem...

EN 31 En gl is h To fully enjoy HbbTV, you need to connect your TV to the Internet. Read more about connecting the TV to the Internet in Connect your TV > Computers and the Internet (Page 55 ). Note : You cannot download files to your TV with this feature. Access HbbTV When you tune to a TV chann...

EN 32 Teletext language Some digital TV broadcasters provide several teletext languages. You can set your primary and secondary language. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings] . 3. Select [Languages] > [Primary Text] or [Secondary Text] . 4. Select your pref...

EN 33 En gl is h Set the clock manually If clock mode is set to [Manual] , set the date and time manually. 1. In the [Clock] menu, select [Date] or [Time] , then press OK . 2. Use the Navigation buttons to make your selection. 3. Select [Done] , then press OK . Sleeptimer Sleeptimer switches the TV ...

EN 37 En gl is h Note: Make sure that the picture format of the TV is set to [Auto format] or [Movie expand 16:9] . Hear another device at TV standby You can hear a connected HDMI-CEC compliant device through the TV speakers, even when the TV is in standby. 1. Press ADJUST to receive audio from the ...

EN 38 4 Set up your TV Settings assistant Use the settings assistant to guide you through the picture and sound settings. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings] , then press OK . 3. Select [Start] , then press OK . 4. Follow the onscreen instructions...

EN 39 En gl is h Audio settings Select audio language If the TV channel has multiple or dual sound broadcast, you can select the preferred audio language. While you watch TV, press OPTIONS .  [Audio language] : Select the audio language for digital channels.  [Dual I-II] : Select the audio languag...

EN 41 En gl is h 3. When the correct channel frequency is entered, select [Done] , then press OK . 4. Select [Store as new channel] , then press OK to store the new TV channel. Install digital and satellite channels Install digital channels To improve TV reception, reposition the antenna. You need t...

EN 42 An onscreen message will notify you if the channel list cannot be copied to the second TV. Note: If you are prompted to enter a code, enter '8888'. Copy channel list to USB 1. Connect a USB storage device to the TV with the channels installed on it. 2. Press . 3. Select [Setup] > [TV settin...

EN 43 En gl is h To switch on hearing impaired audio and subtitles 1. While you watch TV, press OPTIONS . 2. Press one of the following buttons to select an option:  Red : Switch hearing impaired on or off.  Green : Switch on hearing impaired audio and subtitles. 3. Press to exit. Visually impaire...

EN 44 For more information, see the following pages. Update with USB Before performing this procedure, make sure that you have the following:  Spare time to complete the entire update.  A USB flash drive that has at least 256MB of storage space, is FAT or DOS formatted, and has its write protectio...

EN 45 En gl is h Update [Help]  Do not switch off the TV or remove the USB storage device during the update.  If a power failure occurs during the update, do not remove the USB storage device from the TV. The TV continues to update as soon as power is restored.  If an error occurs during the upda...

EN 46 5 Connect your TV About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality cables ensure a good transfer of picture and sound. The connections...

EN 47 En gl is h SCART A SCART cable combines video and audio signals. SCART connectors can handle RGB video signals but cannot handle high-definition (HD) TV signals. VGA Use this connection to display PC content on the TV. For video and sound, use the VGA and AUDIO IN connectors. Connect devices O...

EN 48 Blu-ray or DVD disc player Connect the disc player with an HDMI cable to the TV. Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV. TV receiver Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on certain mod...

EN 50 Recorder Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.) Connect the recorder with a SCART cable to the TV. Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Game console The most practical connectors for a ...

EN 51 En gl is h Connect the game console with an HDMI cable to the TV. Connect the game console with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Home theatre system Connect the home theatre with an HDMI cable and an optical or coaxial audio cable to the TV. (Optical audio output i...

EN 52 Connect the home theatre with a SCART cable to the TV. Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Digital camera Connect the digital camera with a USB cable to the TV. Downloaded From TV-Manual.com Manuals

EN 53 En gl is h Digital camcorder Connect the digital camera with an HDMI cable to the TV. Connect the digital camcorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Connect more devices External hard disk Connect the external hard disk with a USB cable to the TV. Downloaded F...

EN 54 Computer Connect the computer with an HDMI cable to the TV. Connect the computer with a DVI-HDMI cable to the TV. Connect the computer with a VGA cable and an audio cable to the TV. Keyboard and mouse USB keyboard *Available on certain models only. You can connect a USB keyboard to enter text ...

EN 55 En gl is h If you have selected a Cyrillic or Greek keyboard layout first, you can also add a second keyboard with Latin layout. To change the keyboard layout setting, press > [Setup] > [TV settings] > [Preferences] > [USB mouse/keyboard] > [Keyboard settings] and press OK . TV ...

EN 56 Wi-Fi MediaConnect With Wi-Fi MediaConnect you can bring up (project) your PC screen on the TV screen wirelessly. You start Wi-Fi MediaConnect from your PC. See Connect your TV > Computers and the Internet > (Page 59 ). What you need Warning: This TV complies with the EMC directive only ...

EN 57 En gl is h Wireless LAN ready This section is only for wireless ready TVs . With the Wireless USB adapter PTA01 accessory (sold separately), you can connect the TV to your home network wirelessly. You can enjoy the best of the web from Net TV services, and sharing of content between your devic...

EN 58 Find this hexadecimal key in the router software on your PC. Write down the first key of the WEP keys list and enter it on the TV with the remote control. If the security key is accepted, the TV is connected with the wireless router. If asked, agree to the End User License Agreement. If you ar...

EN 60 Stop projecting To stop projecting, click on the TV icon again. Project your PC: Help To read the Wi-Fi MediaConnect Help, right-click the program icon in the notification tray of the PC and select Help. Notes You can project high-definition (HD) or standard-definition (SD) video, depending on...

EN 61 En gl is h 1. Switch off the TV. 2. Follow the directions printed on the CAM and insert the CAM into the Common Interface (CI) slot on the side of the TV. 3. Push the CAM in as far as it will go, then wait for the CAM to be activated. This takes a few minutes. To prevent digital services from ...

EN 62 6 Troubleshooting Contact Philips Warning: Do not attempt to repair the TV yourself. This may cause severe injury, irreparable damage to your TV or void your warranty. If you cannot resolve your problem, refer to the frequently asked questions (FAQs) for this TV at www.philips.com/support . Yo...

EN 63 En gl is h  Make sure that the correct device is selected as the display source.  Make sure that the external device or source is properly connected. There is sound but no picture: Make sure that the picture settings are set correctly. There is poor TV reception from an antenna connection: ...

EN 65 En gl is h 7 Product specifications Power and reception Product specifications are subject to change without notice. Power  Mains power : AC 220-240 V~, 50/60 Hz  Standby power consumption : <0.15 W  Ambient temperature: 5 to 40 degrees Celsius  For power consumption, see the product sp...

EN 66 Multimedia Supported multimedia connections  USB : NTFS, FAT 16, FAT 32. Connect only USB devices which consume 500mA of power or less.  SD card (Videostore)  Ethernet LAN RJ-45 Supported image files  JPEG (*.jpg) Supported audio/video files Multimedia file names must not exceed 128 charac...

EN 67 En gl is h  SAT: F-pin (Satellite). Available on certain models only. Bottom  Ethernet LAN RJ-45  DIGITAL AUDIO OUT: Optical  HDMI 1 - 3  AUDIO IN: DVI/VGA (stereo 3.5mm mini-jack)  Antenna: 75 ohm coaxial  VGA: PC input Side  Common Interface: CI  SD card (Video stores)  2 x USB  H...

EN 68 Use your TV legend to note the dimensions of your TV (with and without the stand). Use your TV legend to note the thickness of your TV with the stand. Use your TV legend to note the thickness of your TV without the stand. Help version UMv 3139 137 04743 - 20120309 Downloaded From TV-Manual.com...

EN 69 En gl is h 8 Index 3 3D - 18 3D glasses - 8 3D, health warning - 7 A age rating - 33 analogue channels, fine-tune - 41 analogue channels, subtitles - 33 audio language - 39 C CAM, enable - 61 CAM, insert - 60 CAM, see Conditional Access Module - 60 care - 7 channel list - 15 channels, favourit...