Pelco WS5000 - Manual
Pelco WS5000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Description; DETERMINING THE TYPE OF FAILURE; Recovering the WS5000 Software
- Page 4 – Recovering the Windows Operating System from the Boot Image
- Page 5 – Recovering the System from a Recovery DVD
- Page 6 – ALTERNATE OPTIONS FOR ACTIVATING WINDOWS; ACTIVATE THE OPERATING SYSTEM FROM AN INTERNET CONNECTION; ACTIVATE THE OPERATING SYSTEM BY TELEPHONE
C4613M (3/09)
For use with WS5070 models
Endura
®
WS5000
Software Recovery
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
C4613M (3/09) 3 Description This document describes how to restore the WS5000 advanced system management software or the Microsoft ® Windows Vista ® operating system if either of these becomes corrupted. The procedures contained in this document will restore the WS5000 software and the operating sys...
4 C4613M (3/09) Recovering the Windows Operating System from the Boot Image You must restart the Endura workstation in Recovery Mode if you want to restore the operating system from the boot image. If the operating system starts but is damaged, you can follow the first set of steps below. If not, yo...
C4613M (3/09) 5 Recovering the System from a Recovery DVD If the operating system software on the disk drive is so badly damaged that you cannot restore it directly from the drive, follow these instructions to restore the operating system from the recovery DVD you received with the Endura workstatio...
