Pelco WM5003-3U - Manual
Pelco WM5003-3U – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C2608M-A (3/08)
WM5003-3U
Fiber Wall Mount Kit
The WM5003-3U is a triple-width wall mount that can accommodate the following 8-channel fiber
optic modules: FT85081SSTR/FR85081SSTR, FT85081SFCR/FR85081SFCR (single mode) and
FT85081MSTR/FR85081MSTR (multimode).
The kit includes a wall bracket, a module sleeve with cover plate, hollow wall anchors, and Phillips
pan head screws with washers. The anchors can be used on plaster, wallboard, and plywood.
To mount the kit:
1. Position the wall bracket in your desired position.
2. Drill four holes into the plaster, wallboard, or plywood.
3. Insert the supplied anchors into the holes.
4. Secure the wall bracket to the wall using the supplied Phillips pan head screws with washers
(refer to Figure 1).
5. Attach the module sleeve to the wall bracket by inserting its four tabs into the four openings
on the wall bracket (refer to Figure 2).
6. Tighten the two thumbscrews on the module sleeve.
Worldwide Headquarters
• 3500 Pelco Way • Clovis, California 93612 USA •
USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150
International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120
Figure 1.
Wall Bracket Mounting
Figure 2.
Module Sleeve Attachment
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
