Page 2 - CONTENTS; Section
2 Pelco Manual C651M (7/99) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 SAFEGUARDS, WARNINGS, CAUTION, AND CARE ...................... 61.2 REGULATORY NOTICES .................................................
Page 4 - LIST OF ILLUSTRATIONS; Not Used
4 Pelco Manual C651M (7/99) REVISION HISTORY Manual # Date Comments C651M 12/98 Original version. 7/99 Removed material on the optional remote control.Changed horizontal resolution specification. LIST OF TABLES Table Page A Not Used B Call Out/Tape End ..................................................
Page 5 - WARNING; AVERTISSEMENT; CET APPAREIL À LA PLUIE NI À L’HUMIDITÉ.
Pelco Manual C651M (7/99) 5 RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol,within an equilateral triangle...
Page 7 - Heavy objects placed on the VCR will cause damage.
Pelco Manual C651M (7/99) 7 Cleaning Unplug the VCR from the wall outlet before cleaning. Do not use liquid or aerosolcleaners. Clean with a soft cloth slightly moistened with mild detergent and water.Wipe dry. NEVER USE PETROLEUM-BASED SOLUTIONS. Attachments Do not use attachments not recommended b...
Page 8 - Care Of Video Cassette Tape; REGULATORY NOTICES
8 Pelco Manual C651M (7/99) Care Of Video Cassette Tape 1. Avoid violent vibration and shock. 2. Do not place near a strong magnetic field (near a motor, transformer, or magnet). 3. Never place or store in direct sunlight. 4. Avoid dusty places. 5. Place the cassette in the cassette case and store v...
Page 9 - INTRODUCTION TO TIME-LAPSE RECORDERS
Pelco Manual C651M (7/99) 9 2.0 OVERVIEW 2.1 INTRODUCTION TO TIME-LAPSE RECORDERS Time-lapse recording permits longer than ordinary recording times. The primaryreason for using time-lapse recording in a CCTV security system is that a singleVCR tape can be used for an extended period of time beyond t...
Page 10 - The battery backup is for
10 Pelco Manual C651M (7/99) • Automatic Head Cleaning—The VCR automatically removes foreign matterfrom the heads when a cassette is inserted for continuous smooth operation. • Easy Setup Using A Monitor—The on-screen menus simplify setup program-ming. You can select these menus even without inputti...
Page 11 - ADDITIONAL ITEMS; This section is intended for
Pelco Manual C651M (7/99) 11 3.0 QUICK START 3.1 BASIC START 1. Decide where to locate the VCR. Do all system hookups first (camera, multi-plexer, etc.) if you are installing the VCR in a location where you cannot ac-cess its rear panel. 2. Connect the VCR to other equipment (Sections 4.2 and 4.3). ...
Page 13 - Figure 1. Typical System Setup
Pelco Manual C651M (7/99) 13 Figure 1. Typical System Setup AUDIOOUT MIC IN VIDEO OUTPUTFROM CAMERA VIDEO IN AUDIO IN MONITOR VIDEOOUT CCTVCAMERA VIDEO IN MIC 600 Ω VIDEO OUT IN IN OUT MIC AUDIO RESET REMOTE SET RST IN REC GND ALM MODE CLK CALL OUT AUDIO IN ALARM OUTPUTFROM DEVICE SET IN ALARM DEVIC...
Page 14 - CONNECTING THE VCR TO A MULTIPLEXER; For Automatic Speed Tracking (“B” lines in Figure 2); This is to start and stop recording when there are alarms.; Cameras and monitors are; Figure 2. Connecting VCR To Multiplexer; MX4000 GENEXTM SERIES MULTIPLEXER
14 Pelco Manual C651M (7/99) 4.3 CONNECTING THE VCR TO A MULTIPLEXER Figure 2 shows how to connect the VCR to an MX4000 Series Genex™ Multi-plexer. • For Automatic Speed Tracking (“B” lines in Figure 2) This lets the VCR control the multiplexer’s recording speed. It is the mostefficient recording me...
Page 15 - Figure 3. Front View
Pelco Manual C651M (7/99) 15 5.0 CONTROLS 5.1 FRONT PANEL REW FF JOG/ADJUST CLEAR/ ENTER/ SHUTTLE REC STOP PLAY POWER EJECT PICTURE TRACKING POSITION/VERTICALADJUST REC/PLAY MODE COUNTER RESET COUNTER MEMORY/ SKIP/INDEX PAUSE/ SHUTTLE HOLD DISPLAY TIMER REC VIDEO SOFT SHARP COLOR B/W 3 6 5 4 7 8 9 B...
Page 16 - FLUORESCENT DISPLAY; Figure 4. Fluorescent Display; PLAY; D C
16 Pelco Manual C651M (7/99) 5.2 FLUORESCENT DISPLAY 1. M (counter memory) indicator Illuminates during rewind for counter memory mode. 2. PL (power loss) indicator Illuminates when there is a power failure during recording. 3. ALARM indicator Flashes during alarm recording and stays on when thealar...
Page 17 - E D C B; outlet or power supply having a different voltage or frequency.
Pelco Manual C651M (7/99) 17 5.3 REAR PANEL Figure 5. Rear View 1. AC power socket The power cord plugs into this socket. Insert the cord firmly. 2. SET IN terminal (Alarm) input terminal to start alarm recording. Connectthe alarm sensor here. 3. RST (reset) IN terminal Input terminal to stop alarm ...
Page 19 - GENERAL PROGRAMMING INSTRUCTIONS; If the VCR is connected to
Pelco Manual C651M (7/99) 19 6.0 PROGRAMMING 6.1 GENERAL PROGRAMMING INSTRUCTIONS The following is a universal procedure that shows how programming is done on theVCR. Use the JOG dial to select items, the SHUTTLE ring to the right to enter,and SHUTTLE ring to the left to exit. 1. Press the DISPLAY b...
Page 20 - QUICK GUIDE TO TLR2096 MENU STRUCTURE
20 Pelco Manual C651M (7/99) 6.2 QUICK GUIDE TO TLR2096 MENU STRUCTURE The operating parameters of the VCR are set through various on-screen menus.Program your choices on the menus according to the instructions on the followingpages. Figure 7. Menu Tree 11 – 11 – 97 09 : 21 : 01 <RECORDING SET UP...
Page 21 - DISPLAY MODE 1 Displays date and time.; is displayed on the monitor.; SMALL; The letters become small.; LARGE; The letters become large.; Figure 9. Display Menu
Pelco Manual C651M (7/99) 21 6.3 MAIN MENU • DISPLAYSets the display format of the time and date on the monitor. • TIME DATE SEARCHSets the time/date and direction to search for a desired location on a tape. • TIMER PROGRAMSets the timed recordings. • RECORDING SET UPSets the alarm recording mode, a...
Page 22 - TIME DATE SEARCH MENU; Turn the JOG dial to set the hour and minute to search for.; DATE; Turn the JOG dial to set the day of the month to search for.; DIRECTION; Figure 10. Time Date; Search Menu; The VCR writes an hour
22 Pelco Manual C651M (7/99) 6.5 TIME DATE SEARCH MENU On this menu you set the date, time, and direction to search for the desired locationon a tape. TIME Turn the JOG dial to set the hour and minute to search for. DATE Turn the JOG dial to set the day of the month to search for. DIRECTION Turn the...
Page 23 - Figure 11. Timer Program Illustration; Recording start time; DW; TIMER PROGRAM MENU
Pelco Manual C651M (7/99) 23 Figure 11. Timer Program Illustration <TIMER PROGRAM> DW START END HR 1 - - - - - : - - - - : - - - - - 2 DAY 08 : 40 17 : 25 L18EP 3 MON 22 : 00 22 : 50 72EP 4 WED 22 : 00 22 : 50 96EP 5 SPL 20 : 30 23 : 30 2SP 6 MON 10 : 10 11 : 15 SKIP 7 SUN 23 : 30 00 : 15 6EP ...
Page 24 - Figure 12. Recording Set; Up Menu; Figure 13. Rear Terminal; Menu
24 Pelco Manual C651M (7/99) 6.7 RECORDING SET UP MENU ALARM REC Sets the alarm recording mode. When you turn the JOG dial, the MODE display switches in the following order: 2H, 6H, L18H, 2H.(Refer to Section 8.3.3 for programming instructions.) ALARM REC Sets the length of the alarm recording perio...
Page 25 - Sets the REC IN terminal’s operation mode.; MAINTENANCE MENU; To display the power loss list, turn the JOG dial to select; Figure 14. Maintenance
Pelco Manual C651M (7/99) 25 CLOCK OUT Sets the number of frames or fields to record (depending on therecording mode) at the CLOCK OUT terminal. 1. First, set the recording mode for the CLOCK OUT pulseoutput in the Rear Terminal menu. • REC – When recording in any mode. • T/L-REC – When recording in...
Page 26 - FIRST TIME SET UP MENU; Daylight Savings Time symbol or power failure symbol; Figure 15. First Time Set; Some multiplexers may re-; Figure 16. Display Mode 1
26 Pelco Manual C651M (7/99) POWER LOSS Turn the SHUTTLE ring to the right and the words POWER LIST CLEAR LOSS LIST CLEAR will be displayed. When you turn theSHUTTLE ring to the left, the list will be cleared. Turn theSHUTTLE ring to the right to return to the Maintenance menu. ALARM LIST Turn the S...
Page 27 - DISPLAY MODE 2; Figure 17. Display Mode 2
Pelco Manual C651M (7/99) 27 DISPLAY MODE 2 1. Month-Day-Year 2. Day of the week 3. Alarm recording number 4. Hour:Minute:Second 5. Daylight Savings Time symbol or power failure symbol 6. Recording mode • A 24-hour display is used: 00:00 indicates midnight; 12:00, noon;and 15:00, 3 p.m. • The day of...
Page 29 - PREVENTING ACCIDENTAL ERASURE; CORRECT
Pelco Manual C651M (7/99) 29 7.0 LOADING/UNLOADING/PROTECTING THE TAPE CASSETTE You can load video cassette tapes into your VCR as long as it is plugged into apower source. Loading a cassette automatically turns the VCR on even if its powerswitch is turned off. Use only video cassette tapes marked V...
Page 30 - MANUAL RECORDING; Load a cassette with the erasure prevention tab intact.; Figure 18. Manual Recording Steps; • P r e s s t h e PA U S E / S H U T T L E; Do not use T-160 tape; Not allowed
30 Pelco Manual C651M (7/99) 8.0 RECORDING 8.1 MANUAL RECORDING See Figure 18. 1. Load a cassette with the erasure prevention tab intact. 2. Press the REC/PLAY MODE buttons (+/-) to select the desired recording mode. 3. Use the VIDEO switch to pick either color or black and white (B/W) recording.(Do...
Page 31 - Table D. When Tape End Is Reached; STOP; The tape stops
Pelco Manual C651M (7/99) 31 8.1.2 Record Check Function When the VCR is recording, press the PLAY button for more than 1.5 seconds andthen release. The tape rewinds a little and then plays back the recording just made.When the tape reaches the spot where you pressed the PLAY button, the VCRreturns ...
Page 32 - • Series recording may have a
32 Pelco Manual C651M (7/99) 8.1.4.2 Recommended Number Of Tape Uses Video tape wears during use. Use a new cassette according to Table E. (T-160 tapein lengthy time-lapse recording can stretch, resulting in poor playback or no play-back.) Table E. Recommended Number Of Tape Uses Number Of Repeat Ta...
Page 33 - Table F. Numbers Of VCRs; And Cameras; Figure 21. Connection For Synchronous Recording; Figure 20. Synchronous Recording Sequence
Pelco Manual C651M (7/99) 33 8.1.6 Synchronous Recording Several camera images can be mixed together through a camera switcher andthen recorded separately onto several VCRs. To do so, assign a camera to eachVCR. The VCR records only the camera image assigned to it. This allows recordingwithout gaps....
Page 35 - Avoid Mistakes When Using The Timer; Table G. Timer Recording Troubleshooting; SYMPTOM; Figure 22. Switching From Normal To Alarm Mode And Back
Pelco Manual C651M (7/99) 35 8.2.3 Avoid Mistakes When Using The Timer Refer to Table G if you get an error when pressing the TIMER REC button. • A tape is not inserted. • A tape is loaded with the erasure prevention tabremoved. • Date, time, or timer recording time is not set. • A menu is being pro...
Page 36 - Alarm reset switch; Figure 23. Alarm Recording Connection; st VCR; Figure 24. Time Clock Adjustment Connection
36 Pelco Manual C651M (7/99) 8.3.1 Alarm Recording Connection You can confirm an alarm from a distance by connecting the ALM (alarm) OUTterminal to an existing alarm system panel or other external device such as a buzzer. VIDEO OUT IN IN OUT MIC AUDIO RESET REMOTE SET RST IN REC GND ALM MODE CLK CAL...
Page 37 - • If an alarm input is received dur-
Pelco Manual C651M (7/99) 37 8.3.3 Programming For Alarm Recording Alarm recording speeds up recording when the VCR is recording in one of the time-lapse modes. Alarm recording provides more pictures during the alarm. Emergencyrecording activates alarm recording even if the VCR is off, stopped, or i...
Page 38 - RECORDING AFTER A POWER FAILURE
38 Pelco Manual C651M (7/99) 8.3.4 Emergency Recording Emergency alarm recording can start when an alarm is triggered even if the VCR isstopped or is programmed for timer recording. 1. Turn the JOG dial to select EMERGENCY REC and turn the SHUTTLE ring tothe right. 2. Turn the JOG dial to select ON ...
Page 39 - PLAYBACK PROCEDURE; Figure 25. Playback Controls; Press the PLAY button to start playback.
Pelco Manual C651M (7/99) 39 9.0 PLAYBACK 9.1 PLAYBACK PROCEDURE REW FF JOG/ADJUST CLEAR/ ENTER/ SHUTTLE REC STOP PLAY POWER EJECT PICTURE TRACKING POSITION/VERTICALADJUST REC/PLAY MODE COUNTER RESET COUNTER MEMORY/ SKIP/INDEX PAUAE SHUTTLE HOLD DISPLAY TIMER REC VIDEO SOFT SHARP COLOR B/W 1 5 2 4 3...
Page 40 - SPECIAL EFFECTS PLAYBACK; Figure 26. Shuttle Ring Speed Settings
40 Pelco Manual C651M (7/99) 9.1.2 Audio Playback The letter “L” mode (L18H) is for audio recording and playback on the linear track. Table H. Audio Playback Availability Playback Mode 2H 6H L18H 72H 96H Audio Playback Available Available Available Not Available Not Available Picture Quality Good Go...
Page 41 - ( ) indicates the playback speed of the recorded tape in 2H mode.; Figure 27. Direct Shuttle Ring Speed Settings; You can use the JOG dial to advance the tape frame by frame.
Pelco Manual C651M (7/99) 41 9.2.2 Direct Shuttle Ring You can also change the playback speed without entering pause mode by turningthe SHUTTLE ring during playback. Releasing the SHUTTLE ring returns it to thecenter position and resumes normal playback. 1 Reverse high speed search 2 Reverse speed s...
Page 42 - LOCATING THE START OF ALARM RECORDINGS; Figure 28. Index Searching; Turn the SHUTTLE ring to the right or left.; Figure 29. Skip Searching
42 Pelco Manual C651M (7/99) 9.3 LOCATING THE START OF ALARM RECORDINGS The VCR automatically inserts an index signal at the beginning of each alarm re-cording, so the start of each alarm can be located. 9.3.1 Index Search During fast forward or rewind, the VCR will search for alarm index signals. W...
Page 43 - ADJUSTMENT DURING PLAYBACK; • Noise bars may appear when in; IF NOISE APPEARS; Figure 30. Tracking Adjustment
Pelco Manual C651M (7/99) 43 9.4 ADJUSTMENT DURING PLAYBACK 9.4.1 Tracking Adjustment If noise appears in the picture during playback, fast playback, reverse playback, orforward/reverse slow playback, adjust the TRACKING buttons (+ and -) for the bestpicture. Press the PAUSE/SHUTTLE HOLD button whil...
Page 45 - ADDITIONAL FUNCTIONS AND FEATURES; EEE EE illuminates to show VCR power is in standby mode.; MEMORY BACKUP IN CASE OF POWER FAILURE; Press the DISPLAY button to display the Main menu.; The counter display is
Pelco Manual C651M (7/99) 45 10.0 ADDITIONAL FUNCTIONS AND FEATURES 10.1 COUNTER 10.1.1 Counter Memory Press the COUNTER MEMORY/SKIP/INDEX button repeatedly until the “M” indi-cator appears on the fluorescent display. Turn the SHUTTLE ring to the right andthe tape will rewind to the 00000 position o...
Page 46 - ELAPSED TIME DISPLAY
46 Pelco Manual C651M (7/99) 10.4 ELAPSED TIME DISPLAY The elapsed time of recording and playback is stored in memory. Use the elapsedtime as a guide for periodic replacement of parts. 1. Press the DISPLAY button to display the Main menu. 2. Turn the JOG dial to select MAINTENANCE and turn the SHUTT...
Page 48 - TROUBLESHOOTING; SELF-DIAGNOSTIC FUNCTION AND WARNING DISPLAY; End; Table J. Warning Display and Actions
48 Pelco Manual C651M (7/99) 12.0 TROUBLESHOOTING 12.1 SELF-DIAGNOSTIC FUNCTION AND WARNING DISPLAY The VCR uses self-diagnostics to detect internal malfunctions during recording. Ifone occurs, the VCR indicates it on the monitor and in the VCR’s fluorescent dis-play. Table J shows the type of malfu...
Page 49 - BEFORE CALLING FOR SERVICE
Pelco Manual C651M (7/99) 49 12.2 BEFORE CALLING FOR SERVICE SYMPTOM REMEDY VCR does not operate. • Is the LOCK indicator illuminated?• Is the power cord disconnected from the AC output?• Is the TIMER REC indicator illuminated? The VCR power is on but unit does not operate. • Is the LOCK indicator i...
Page 52 - WARRANTY AND RETURN INFORMATION; WARRANTY; RETURNS
52 Pelco Manual C651M (7/99) 14.0 WARRANTY AND RETURN INFORMATION Pelco, the Pelco logo, Camclosure, Esprit,Genex, Legacy, and Spectra are registeredtrademarks of Pelco.Endura and ExSite are trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, wit...
