Pelco SS4718L - Manual
Pelco SS4718L – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SUN SHROUDS; Unlatch and raise enclosure lid.; INSULATION; Unlatch the enclosure lid and raise.; Installation; The camera mounting sled; . Lid Insulation Installation; Figure 1; . Sun Shroud Installation
- Page 3 – version of the enclosure.; Specifications; Temperature increase inside enclosure with heater operating:; Figure 3; . Installation of TI47 Thermal Insulation
- Page 4 – WARRANTY AND RETURN INFORMATION; WARRANTY; RETURNS
®
SS4718/SS4718L/SS4722/SS4722L
Sun Shroud and
TI47 Thermal Insulation
Installation/Operation Manual
C1409M-C (7/98)
1.0 WARNINGS
Prior to installation and use of this product, the following WARNINGS should be
observed.
1.
Installation and servicing should only be done by qualified service personnel
and conform to all local codes.
2.
Only use replacement parts recommended by Pelco.
Please thoroughly familiarize yourself with the information in this manual prior to
installation and operation.
2.0 DESCRIPTION
The information contained within this manual covers the SS4718, SS4722, SS4718L,
SS4722L Sun Shrouds and the TI47 Thermal Insulation Kit installation.
The SS4718, SS4722, SS4718L, and SS4722L Sun Shrouds provide an air space
between the sun shroud and the enclosure to protect the enclosure from the direct
rays of the sun and reduce the internal temperature by approximately 10 to 15
°
F
(-12.2
°
to -9.4
°
C).
The TI47 Thermal Insulation Kit provides an improved resistance to heat loss through
the body of the enclosure by adding a 1/4-inch thick polyurethane insulation to the
majority of the internal surfaces.
Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Pelco Manual C1409M-C (7/98) 3.0 INSTALLATION 3.1 SS4718/SS4722/ The sun shroud is supplied with two (2) threaded spacers and two (2) Phillips head SS4718L/SS4722L screws. SUN SHROUDS To install the sun shroud, perform the following steps (refer to Figure 1). 1. Unlatch and raise enclosure lid. 2....
Pelco Manual C1409M-C (7/98) 3 3.2.2 Body Insulation 1. Remove the long, 1.5-inch wide, strip of insulation for the side panel from the Installation lid insulation pad. 2. To adjust the length of the insulation pad (or the side panel), tear the insulationalong the perforations from the end(s) of the...
4 Pelco Manual C1409M-C (7/98) 4.0 WARRANTY AND RETURN INFORMATION Pelco, the Pelco logo, Camclosure, Esprit,Genex, Legacy, and Spectra are registeredtrademarks of Pelco.Endura and ExSite are trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, wi...
