Pelco RMA14S - Manual

Pelco RMA14S

Pelco RMA14S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

C1956M-A (10/03)
RMA14S
Rack Mount Kit

3500 Pelco Way
Clovis, CA 93612-5699
USA

In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150

International Customers:
Tel (1-559) 292-1981
FAX (1-559) 348-1120

www.pelco.com

®

WARNINGS

Observe the following warnings before installing and using this product.

1.

Installation and servicing should be done by qualified service and installation personnel only.

2.

Installation should be done according to all local and national electrical and mechanical
codes, using only approved materials.

3.

Use only installation methods and materials capable of supporting four times the maximum
weight of the monitor and rack mount.

Please thoroughly familiarize yourself with the information in this manual prior to installation.

DESCRIPTION

The RMA14S Rack Mount Kit holds a single Sony SSM14N1U Monitor. The rack mount will fit
any standard 19-inch (48.26 cm) wide console or rack configuration and will securely hold the
monitor in place in a console to a maximum of a 30-degree slant.

INSTALLATION

To install the rack mount kit and monitor:

1.

Assemble the rack mount kit’s sides and bottom as shown in Figure 1 using the supplied
screws. While assembling, install the screws loosely until these components are attached
and then finish by tightening all the screws.

2.

Install the top cross brace on the top of the rack mount with six of the screws provided. Just
start the screws but do not tighten.

3.

While pushing up firmly on the bottom of the top cross brace, tighten the screws. (If you do
not push upward to take out the slack, the monitor will not fit.)

NOTE:

Installation of the rack

mount, with monitor installed, into
the rack or console may require
two people.

1

2

3

4

5

6

6

6

SHOWN FOR CLARITY ONLY

Figure 1.

RMA14S Rack Mount Kit Assembly

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Pelco Models

All Pelco Other