Pelco PS30-24 - Manual
Pelco PS30-24 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table A. Mechanical Parts List; Item
- Page 3 – SWITCH; WIRING DIAGRAMS AND SCHEMATICS
- Page 4 – REVISION HISTORY; Date; Revised limit stop part number in Table A.; QTY; MOTOR; Figure 3. PS30-24 Schematic and Wiring Diagrams; WARRANTY AND RETURN INFORMATION
This maintenance/service manual consists of an exploded assembly diagram and parts lists. Use
this manual when ordering replacement parts for PS30A/PS30-24 Scanners.
MAINTENANCE
Under normal operating conditions and usage, maintenance of this equipment is not necessary.
The PS30A and PS30-24 Scanners require no lubrication, and the motors are both clutch and
impedance protected from overload. The outside of the scanner can be cleaned by wiping with a
dry cloth or spraying with clean air pressure.
Do not use
spray cleaners or water.
EXPLODED ASSEMBLY DIAGRAM
C360SM-A (3/02)
PS30A and PS30-24
Scanners
®
Figure 1. PS30A/PS30-24
Exploded Assembly Diagram
3500 Pelco Way
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel +1(559) 292-1981
FAX +1(559) 348-1120
www.pelco.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table A. Mechanical Parts List Item Qty Description Part Number 1 1 Gear train shaft 1754064COMP 2 1 Motor, 24 VAC (PS30-24) 5708008 Motor, 120 VAC (PS30A) 1758008 3 1 Motor gear head 1758009 4 1 Spindle nut 2504012COMP 5 2 Pan spindle bearing 2506000 6 3 Limit stop 58010006 7 1 Bearing 5806005 8 2 ...
Table B. Hardware Parts List Item Qty Description Part Number A 2 Bolt, 3/8-16 x .625-inch ZH3/816X.625CH B 3 Bolt, 1/4-20 x .625-inch ZH1/420X.625CH C 3 Screw, 6-32 x .375-inch, pan head, Phillips ZH6-32X.375SPP D 3 Set screw, 10-32 x .75-inch ZH10-32X.750S E 4 Allen screw, 10-32 x .5-inch ZH10-32X...
REVISION HISTORY Manual # Date Comments C360SM 10/99 Original version. C360SM-A 3/02 Revised limit stop part number in Table A. QTY SYMBOL DESCRIPTION PART NUMBER 2 C1-C2 CAPACITOR, CAPU0015.0/100N 15 µ F/100V 2 C3-C4 CAPACITOR, CAPU000.05/500 .05 µ F/500V 1 M1 MOTOR 5708008 1 R1 RESISTOR, RES010.0-...
