Pelco NSM5200 - Manual - manualsarea.com

Page 2 - Video Quality Caution; FRAME RATE NOTICE REGARDING USER-SELECTED OPTIONS

2 C4603M-A (5/09) Video Quality Caution FRAME RATE NOTICE REGARDING USER-SELECTED OPTIONS Pelco systems are capable of providing high quality video for both live viewing and playback. However, the systems can be used in lower quality modes, which can degrade picture quality, to allow for a slower ra...

Page 3 - Getting Started; USING THE WEB BROWSER

C4603M-A (5/09) 3 Getting Started This manual explains how to configure the Endura ® NSM5200 network storage manager (NSM) using a standard Web browser. The NSM5200 can be configured using a web browser on a PC connected to the Endura network or directly connected to each NSM5200. NOTE: Each NSM5200...

Page 4 - CONFIGURING CABLE SETUPS; CROSSOVER CABLE

4 C4603M-A (5/09) CONFIGURING CABLE SETUPS If you are connecting directly to each NSM through a laptop, follow the instructions below to connect to Ethernet port 2. If you are connecting to the NSM5200s through a central PC, use the Endura Utilities to find the DHCP address assigned to each NSM5200,...

Page 5 - STRAIGHT THROUGH CABLE

C4603M-A (5/09) 5 STRAIGHT THROUGH CABLE To configure your network settings using a straight through cable (refer to Figure 2): 1. Connect a standard network cable from Ethernet port 1 to the Endura network. 2. Connect one end of the straight through cable to the network connector on the laptop. 3. ...

Page 6 - Setting Up the NSM Pools; CONFIGURING THE POOL MANAGER; UNIT SETTINGS

6 C4603M-A (5/09) Setting Up the NSM Pools CONFIGURING THE POOL MANAGER Figure 3 displays the setup screen for the Pool Manager. Figure 3. NSM Settings Screen: Configuring the Pool Manager UNIT SETTINGS 1. Select Manager as the Unit Role (if not already selected). 2. Type a user-friendly name in the...

Page 7 - NETWORK SETTINGS; POOL SETTINGS

C4603M-A (5/09) 7 NETWORK SETTINGS 1. Select DHCP or Static • DHCP: Select DHCP if you want the network to automatically assign an IP address to the NSM5200. Go to Pool Settings to continue with the Pool Member configuration. • Static: Select Static if you want to assign IP settings manually. Additi...

Page 8 - ADDING CAMERAS TO A STORAGE POOL

8 C4603M-A (5/09) ADDING CAMERAS TO A STORAGE POOL Prior to assigning cameras to a storage pool, Pelco recommends that camera names and attributes are configured using the WS5000. Each camera is assigned to one NSM at a time. Once assigned, the camera is seen only in that NSM’s associated pool. If t...

Page 9 - CONFIGURING A POOL MEMBER

C4603M-A (5/09) 9 CONFIGURING A POOL MEMBER Figure 6 displays the setup screen for the Pool. NOTE: Reconnect your cable connections for each Pool Member before configuring the settings (refer to Configuring Cable Setups on page 4). Figure 6. Configuring a Pool Member UNIT SETTINGS 1. Select Member a...

Page 10 - CHANGING SECURITY SETTINGS

10 C4603M-A (5/09) POOL SETTINGS 1. Type the failover static IP address, or the domain name that was configured on the Pool Manager, in the Manager Address box. 2. Type the key that is generated on the manager unit in the Manager Key box, and then click Validate Key to verify that the key was entere...

Page 11 - PRODUCT WARRANTY AND RETURN INFORMATION

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective inmaterial or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years: – Fiber optic products– TW3000 ...

Pelco NSM5200 - Manual

Table of Contents:

Summary

Other Pelco Models