Page 2 - CONTENTS; Section
2 Pelco Manual C1995M-A (10/01) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS ................................................................ 4DESCRIPTION ................................................................................................................... 5 WHAT IS A VIDEO ...
Page 3 - LIST OF ILLUSTRATIONS; Figure; LIST OF TABLES; Table
Pelco Manual C1995M-A (10/01) 3 LIST OF ILLUSTRATIONS Figure Page 1 Stand-Alone Multiplexer ..................................................................................... 7 2 Multiplexer with KBD4000 Keyboard ................................................................. 7 3 Multiplexers w...
Page 4 - IMPORTANT SAFEGUARDS AND WARNINGS; conform to all local codes.; FOR QUALIFIED SERVICE PERSONNEL ONLY; Only use replacement parts recommended by Pelco.
4 Pelco Manual C1995M-A (10/01) This symbol indicates that dangerousvoltage constituting a risk of electric shockis present within this unit. This symbol indicates that there areimportant operating and maintenanceinstructions in the literature accompanyingthis unit. C A U T I O N : RISK OF ELECTRIC ...
Page 5 - DESCRIPTION; WHAT IS A VIDEO MULTIPLEXER?
Pelco Manual C1995M-A (10/01) 5 DESCRIPTION WHAT IS A VIDEO MULTIPLEXER? A four-channel (or quad) multiplexer lets you record pictures from up to four cameras on asingle VCR. You can also watch up to four cameras simultaneously on one screen, eitherlive or in playback. For closer detail, you can cho...
Page 6 - Cameras can be sequenced on all monitors.; MODELS; Same as MX4004CD except PAL standard
6 Pelco Manual C1995M-A (10/01) GENEX ® SERIES MULTIPLEXERS The MX4004 Genex ® Series duplex multiplexers can accept video inputs from a maximum of four cameras. You can work in any of four languages: English (default), French, German,or Spanish. These duplex multiplexers let you view multi-screen v...
Page 7 - Figure 2. Multiplexer with KBD4000 Keyboard; APPLICATIONS; compatible. In Figure 1 cameras are fixed.
Pelco Manual C1995M-A (10/01) 7 ALARMS COM-IN COM-OUT 12 VDC 1 2 3 4 H 0 OUT IN SVHS VCR MAIN SVHS 75 OHMS 1 2 3 4 SPOT IN OUT 1 2 3 4 CAMERAS - 4 MAXIMUM SPOTMONITOR(OPTIONAL) MAINMONITOR IN OUT VCR MX4004 MULTIPLEXER ALARMS COM-IN COM-OUT 12 VDC 1 2 3 4 H 0 OUT IN SVHS VCR MAIN SVHS 75 OHMS 1 2 3 ...
Page 9 - Figure 4. Multiplexer with CM6700 Matrix Switcher
Pelco Manual C1995M-A (10/01) 9 Figure 4. Multiplexer with CM6700 Matrix Switcher 1 2 3 4 5 6 7 8 R+ R- T T+ LOCAL O N O N 1 2 3 4 1 2 3 4 1 2 3 4 5 6 7 8 12 VAC 1 2 3 4 5 6 7 8 O N O N 1 2 3 4 KBD300 KBD300 MULTIPLEXER WALL BLOCK WALL BLOCK TERMINALS USER-SUPPLIED CABLEBETWEEN REMOTEKEYBOARD PORT A...
Page 10 - INSTALLATION; Wall transformer; MOUNTING; Figure 5. Rack Installation – One Multiplexer; SINGLE MOUNT
10 Pelco Manual C1995M-A (10/01) INSTALLATION Unpack and inspect all parts carefully. The following parts are supplied: 1 MX4004 Series multiplexer 1 6-foot (1.8 m) data cable with RJ-45 connectors 1 Wall transformer 1 Power cord (PAL models only) MOUNTING Place the multiplexer on a flat surface or ...
Page 11 - Figure 6. Rack Installation – Two Multiplexers; DOUBLE MOUNT; You need to locate
Pelco Manual C1995M-A (10/01) 11 Figure 6. Rack Installation – Two Multiplexers 5 4 5 1 1 3 2 DOUBLE MOUNT 1. Refer to Figure 6. Remove the front two screws from both sides of the multiplexer. Usefour of the screws to attach the short rack ears to the outer sides of each unit. 2. Use two of the scre...
Page 12 - CONNECTING CAMERAS; Figure 7. Camera Wiring Example; Stand-Alone Multiplexer – Connect fixed cameras to channel inputs.
12 Pelco Manual C1995M-A (10/01) CONNECTING CAMERAS ALARMS COM-IN COM-OUT 12 VDC 1 2 3 4 H 0 OUT IN SVHS VCR MAIN SVHS 75 OHMS 1 2 3 4 SPOT IN OUT 1 2 3 4 LOOPING INPUTS LOOPED VIDEO NON-LOOPING INPUTS 00154 Figure 7. Camera Wiring Example Video inputs can come from any conventional source. No exter...
Page 13 - CONNECTING MONITORS; Refer to Table A for the type of video coaxial cable to use.; Skip this step if you; Table A. Video Coaxial Cable Requirements
Pelco Manual C1995M-A (10/01) 13 CONNECTING MONITORS Refer to Table A for the type of video coaxial cable to use. Main Monitor – Connect the video input of your monitor to the multiplexer’s MAIN outputusing standard BNC connector and coaxial cable. If your color monitor supports SVHS, youcan use a s...
Page 14 - GROUND; Programming; Proceed to
14 Pelco Manual C1995M-A (10/01) VCR HOOKUP, HEAD PULSE SWITCHING, AND PROGRAMMING STANDARD VCRS If you have a Pelco VCR, proceed to Pelco’s Time-Lapse VCRs. ALARMS COM-IN COM-OUT 12 VDC 1 2 3 4 H 0 OUT IN SVHS VCR MAIN SVHS 75 OHMS 1 2 3 4 SPOT IN OUT 1 2 3 4 VCR (STANDARD OR SVHS) RECORD/PLAY GROU...
Page 15 - PELCO’S TIME-LAPSE VCRS; Figure 9. Pelco Time-Lapse VCR Wiring Example
Pelco Manual C1995M-A (10/01) 15 PELCO’S TIME-LAPSE VCRS ALARMS COM-IN COM-OUT 12 VDC 1 2 3 4 H 0 OUT IN SVHS VCR MAIN SVHS 75 OHMS 1 2 3 4 SPOT IN OUT 1 2 3 4 PELCO TIME-LAPSE VCR A B REMOTE RESET IN GND CLK AUDIO VIDEO IN OUT CAL OUT OUT MIC ALM IN REC SET RST MODE 00137 Figure 9. Pelco Time-Lapse...
Page 16 - WIRING ALARM INPUTS; Figure 10. Alarm Wiring Example
16 Pelco Manual C1995M-A (10/01) WIRING ALARM INPUTS ALARMS COM-IN COM-OUT 12 VDC 1 2 3 4 H 0 OUT IN SVHS VCR MAIN SVHS 75 OHMS 1 2 3 4 SPOT IN OUT 1 2 3 4 VCR (STANDARD OR SVHS) VIDEO INPUTCORRESPONDSTO ALARM INPUT GROUND ALARMRECORDSIGNAL Figure 10. Alarm Wiring Example Alarm inputs require a grou...
Page 17 - CONNECTING A KBD4000 SERIES KEYBOARD (OPTIONAL); Figure 11. Connecting the Keyboard to the Multiplexer; SINGLE KEYBOARD; Applications section for an overview of a typical application.
Pelco Manual C1995M-A (10/01) 17 CONNECTING A KBD4000 SERIES KEYBOARD (OPTIONAL) Figure 11. Connecting the Keyboard to the Multiplexer SINGLE KEYBOARD This installation is for a single keyboard plugged into a Genex multiplexer. Refer to Figure 2in the Applications section for an overview of a typica...
Page 18 - STAR CONFIGURATION OF MULTIPLEXERS; Figure 12. Star Configuration of Multiplexers
18 Pelco Manual C1995M-A (10/01) STAR CONFIGURATION OF MULTIPLEXERS The CM9760-CDU-T can be used as a distribution unit for a star configuration of GenexSeries multiplexers. Refer to Figure 12. ALARMS COM-IN COM-OUT 12 VDC 1 2 3 4 H 0 OUT IN SVHS VCR MAIN SVHS 75 OHMS 1 2 3 4 SPOT IN OUT 1 2 3 4 ALA...
Page 19 - CONNECTING AN MX4000SVR SERVER WITH KEYBOARDS (OPTIONAL); Figure 14. Daisy Chaining Multiplexers to the Server
Pelco Manual C1995M-A (10/01) 19 CONNECTING AN MX4000SVR SERVER WITH KEYBOARDS (OPTIONAL) Figure 13. Connecting KBD4000/KBD4002 Keyboards to the Server R+ R- T- T+ LOCAL KEYBOARD ON 1 2 3 4 5 6 7 8 ON 1 2 3 4 5 6 7 8 ON 1 2 3 4 5 6 7 8 ON 1 2 3 4 5 6 7 8 1 TX+2 TX-3 12VAC4 12VAC5 GND6 NC7 RX-8 RX+ 1...
Page 20 - CONNECTING A MULTIPLEXER WITH CM6700 SCU (OPTIONAL); Multiplexer; Figure 15. Connecting Multiplexer to a CM6700 SCU
20 Pelco Manual C1995M-A (10/01) NOTE: A KBD4000/KBD4002/KBD4000V keyboard cannot be used when a multiplexer is used with a CM6700 SCU. Refer to Figure 4 in the Applications section for an overview of a typical application. Refer to Figure 15 for wiring the multiplexer. Refer to Table B for RJ-45 pi...
Page 21 - Video Termination
Pelco Manual C1995M-A (10/01) 21 POWERING THE MULTIPLEXER Use the following procedure to initialize multiplexers being powered up for the first time orafter extended storage. This clears any random data remaining in the multiplexer andinitializes the memory for user programming. 1. Turn on power to ...
Page 22 - PROGRAMMING; There are two ways to program the multiplexer:; CODE FILE PROGRAMMING SWITCH; Advanced System
22 Pelco Manual C1995M-A (10/01) PROGRAMMING Programming of setups for system, camera, VCR, camera sequencing, and alarm handlingis done through on-screen menus displayed on the main monitor. There are two ways to program the multiplexer: • From the multiplexer front panel. This section provides det...
Page 23 - CHANGING THE LANGUAGE; Change on the Main Menu
Pelco Manual C1995M-A (10/01) 23 CHANGING THE LANGUAGE You can work in any of four languages: English, French, German, or Spanish. There are two ways to set the language you want to work in: change the language selectionon the Main menu or reset the unit. • Change on the Main Menu 1. Hold down the Q...
Page 24 - LIVE/VCR button — to enter the Record Setup menu
24 Pelco Manual C1995M-A (10/01) GENERAL MENU INFORMATION MENU NAVIGATION AND EDITING • When you enter a menu, the cursor is on EXIT. Pressing the arrow buttons moves thecursor one position. Holding them down moves the cursor continuously throughselections until you release them. • Pressing the +/- ...
Page 25 - Figure 16. Menu Access Buttons
Pelco Manual C1995M-A (10/01) 25 Figure 16. Menu Access Buttons VCRLIVE 1 2 3 4 Duplex Color Mult i plexer SEQUENCE VIEW CUSTOM VCR SET-UP RECORD SPEEDSWITCH INTERVAL ALARM RECORD SET-UP 00 MAIN MENU EXIT NORMAL RECORD SET-UP 2 / 6 / 8Hr003 RECORD SPEEDSWITCH INTERVAL 2 / 6 / 8Hr003 RECORD SET-UP NO...
Page 26 - MENUS; The word LIVE or VCR is always displayed on the main monitor.; Figure 17. Main Selection Menu; Use the arrow buttons to move between items on the screen.
26 Pelco Manual C1995M-A (10/01) MENUS The word LIVE or VCR is always displayed on the main monitor. MAIN SELECTION MENU (QUAD BUTTON) Figure 17. Main Selection Menu MAIN SELECTION MENU RECORD SETUPCAMERA 1 SETUP CAMERA 2 SETUP CAMERA 3 SETUP CAMERA 4 SETUP SEQUENCE SETUPSYSTEM SETUP SYSTEM ADVANCED...
Page 28 - Figure 19. Alarm Wiring Example; Dwell Rates
28 Pelco Manual C1995M-A (10/01) GLOBAL SETUPS Alarm Inputs Program alarm inputs for normally opened operation, normally closed operation, or disabled. Normally Closed = current flow = alarm switch or relay closed Normally Open = no current flow = alarm switch or relay open Figure 19. Alarm Wiring E...
Page 29 - Figure 20. System Advanced Setup Menu; To program the advanced main system parameters:; Use the arrow buttons to highlight ADVANCED SET-UP.; Date Format; Set the format for displaying the date on the main monitor.; Password
Pelco Manual C1995M-A (10/01) 29 SYSTEM ADVANCED SETUP (VIEW BUTTON) Figure 20. System Advanced Setup Menu To program the advanced main system parameters: 1. Do one of the following: • Select SYSTEM ADVANCED SETUP on the Main Selection menu. Type thepassword if requested. The System Advanced Setup m...
Page 30 - Figure 21. Monitor Menus for Multiple Units in One System; Comm Type; If you have a stand-alone multiplexer, it must be the master.; Do not program the
30 Pelco Manual C1995M-A (10/01) Spot Monitor Display/Responds To If you want the spot monitor to switch to cameras that have alarms, select BLANK,SEQUENCE, or TRACK MAIN, then under RESPONDS TO select ALARM. If you areusing the spot monitor for normal video and you do not want alarms to override wh...
Page 31 - Figure 22. Record Setup Menu; To program the VCR recording parameters:; Record Speeds
Pelco Manual C1995M-A (10/01) 31 RECORD SETUP (LIVE/VCR BUTTON) Figure 22. Record Setup Menu To program the VCR recording parameters: 1. Select RECORD SETUP on the Main Selection menu or press the LIVE/VCR buttonfor about three seconds until the Record Setup menu appears. Type the password, ifreques...
Page 32 - VCR Switch Pulse; DISABLED means the head switching pulse is not used.; Alarm Handling; Determines how alarms are recorded and for how long.; Record Alarms; ONLY records only cameras with an alarm.; Playback Format
32 Pelco Manual C1995M-A (10/01) VCR Switch Pulse ENABLED + means the multiplexer waits for a positive head switching pulse from theVCR. If the multiplexer does not get a pulse from the VCR (because of a broken wireor the VCR does not give a pulse in some modes), it may appear the multiplexer is not...
Page 33 - CUSTOM VCR SETUP; Figure 23. Custom VCR Setup Menu
Pelco Manual C1995M-A (10/01) 33 CUSTOM VCR SETUP Figure 23. Custom VCR Setup Menu To program advanced VCR parameters: 1. Select RECORD SETUP on the Main Selection menu or press the LIVE/VCR buttonfor about three seconds until the Record Setup menu appears. Type the password, ifrequested. The curren...
Page 34 - Figure 24. Camera Menu; Title; Enter a title for this particular camera.; Covert; Refer to the
34 Pelco Manual C1995M-A (10/01) CAMERA SETUP (CAMERA BUTTON) Figure 24. Camera Menu Each of the four cameras has its own setup screen. To program a camera input: 1. Select CAMERA (1-4) SETUP on the Main Selection menu or press the desiredCAMERA button for about three seconds until the Camera menu a...
Page 35 - Coaxitron; OFF – Use when your system has fixed cameras only.; Dwell; Figure 25. Camera Sequence Menu; To program camera sequencing:; Seconds
Pelco Manual C1995M-A (10/01) 35 Coaxitron EXTENDED – Use when your system has moveable cameras controlled by 32-bitCoaxitron receivers, such as Esprit™, Intercept, Spectra, IRD/ERD2000 Series, andLRD41C21/LRD41C22 Series. OFF – Use when your system has fixed cameras only. STANDARD – Use when your s...
Page 36 - PROGRAMMING MENU DEFAULTS; Table C. Programming Menu Defaults; Menu
36 Pelco Manual C1995M-A (10/01) PROGRAMMING MENU DEFAULTS Table C. Programming Menu Defaults Menu Item Default System (Basic) Time display On Setup Title display On Normal record speed 2/6/8 Hr (NTSC), 3 Hr (PAL) Alarm record speed 2/6/8 Hr (NTSC), 3 Hr (PAL) Main monitor video Composite Main monit...
Page 37 - SPECIFIC APPLICATIONS PROGRAMMING; Press OPEN to select if the menu item has only one option.; PAN AND TILT CONTROL QUICK SETUP; In any menu, you can
Pelco Manual C1995M-A (10/01) 37 SPECIFIC APPLICATIONS PROGRAMMING KBD4000/KBD4002/KBD4000V PROGRAMMING (OPTIONAL) Before you can use the keyboard to control the multiplexer, you must do the following at themultiplexer front panel: 1. Hold down the VIEW button for approximately three seconds until t...
Page 38 - SPECTRA/ESPRIT MAIN MENU ACCESS; TESTING; RECORDING AND PLAYBACK; Stop the VCR and rewind the tape to its starting point.; Press PLAY on the VCR.
38 Pelco Manual C1995M-A (10/01) SPECTRA/ESPRIT MAIN MENU ACCESS You can call up the Spectra or Esprit main menu by programming preset 95 (28 if in 32-preset mode). If you are using a KBD4000 Series keyboard: Press the SPOT MONITOR key. Enter 95,and then hold the PRESET key until the main menu appea...
Page 40 - Table D. Front Panel Controls; BUTTON; Figure 26. Multiplexer Front Panel; To access the; OPERATION
40 Pelco Manual C1995M-A (10/01) Table D. Front Panel Controls BUTTON LIVE/VCR CAMERA SEQUENCE VIEW FUNCTION Toggles main monitor display between live inputs and playback fromVCR. In LIVE mode, the red LED lights. Displays or exits the Record Setup menu on the main monitor. Switches the selected cam...
Page 41 - Table E. Operation Guide
Pelco Manual C1995M-A (10/01) 41 OPERATION Call a camera tothe main monitor. Call a camera tothe spot monitor. Set maintracking. Run a sequenceof cameras onthe main monitor. Run a sequenceof cameras onthe spot monitor. Stop a sequence. Record a tape. Play a tape. FRONT PANEL COMMAND 1. Make sure the...
Page 43 - Figure 27. Alarm Log; TROUBLESHOOTING; Are the keyboard switches set properly?
Pelco Manual C1995M-A (10/01) 43 ALARM LOG ALARM LOG NO. 01020304050607080910 11 12131415161718 CAMERA 1603 11 14 111111 09 11 1407 11 16140308 11 14 TIME 23:59:5912:02:1012:04:1412:05:3712:09:2912:13:1912:17:2513:14:2613:49:4913:54:1415:44:3316:19:5616:26:3517:04:2219:10:1720:32:5820:45:4021:19:32 ...
Page 44 - RESET; To reset the multiplexer:
44 Pelco Manual C1995M-A (10/01) 9. Moveable cameras can be operated with the joystick or pan and tilt keys: • From the main monitor if the spot monitor is programmed to track the mainmonitor. • From the spot monitor if the spot monitor is chosen. Also, the camera will move on the main monitor if th...
Page 45 - SPECIFICATIONS; VIDEO
Pelco Manual C1995M-A (10/01) 45 SPECIFICATIONS VIDEO Input Level: 1 Vp-p, composite NTSC: 525 lines, 60 fields/second PAL: 625 lines, 50 fields/second Digital FullScreen Image: 720 (H) x 480 (V) pixels full screen1440 bytes horizontal memory12 MB display image memory8-bit luminance, 256 shades of g...
Page 46 - INDEX; Esprit main menu 38
46 Pelco Manual C1995M-A (10/01) INDEX A Advanced system setup 29Alarm handling 32Alarm inputs 28, 34Alarm log 43Alarm/relay/VCR scenario testing 39Alarms description 6installation 16open/closed/disabled 28 C Camera setup 34CM6700 switcher/controller unit 20CM9760-CDU-T 18Coaxitron format 35Comm typ...
Page 48 - REVISION HISTORY; Date; REGULATORY NOTICES; Reorient or relocate the receiving antenna.
48 Pelco Manual C1995M-A (10/01) REVISION HISTORY Manual # Date Comments C1995M 7/01 Original version. C1995M-A 10/01 Changed camera addressing information in the Troubleshooting section. Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. © Copy...
