Pelco MPT220DT - Manual
Pelco MPT220DT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – CONNECTOR ASSEMBLY; Contacts cannot be removed from the
- Page 4 – Wiring Diagram
- Page 5 – When a pan limit is reached, scan direction is
- Page 6 – CONTROLS; Long life neon; ELECTRICAL; Fuse Protection: 1 amp SB
- Page 7 – Dimension Drawing; GENERAL; Cover
®
1.0 WARNINGS
Prior to installation and use of this product, the follow-
ing WARNINGS should be observed.
1.
Installation and servicing should only be done by
Qualified Service Personnel and conform to all
Local codes.
2.
Unless the unit is specifically marked as a NEMA
Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is de-
signed for indoor use only and it must not be in-
stalled where exposed to rain and moisture.
3.
Use only installation methods and materials ca-
pable of supporting four (4) times the maximum
specified load.
4.
Only use replacement parts recommended by
Pelco.
Please thoroughly familiarize yourself with the infor-
mation in this manual prior to installation and opera-
tion.
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 • USA • www.pelco.com
(800) 289-9100 or (1-559) 292-1981 • FAX (800) 289-9150 or (1-559) 292-3827
International customers call (1-559) 292-1981 or FAX (1-559) 348-1120
MPT24DT, MPT115DT, and
MPT220DT Series
Pan/Tilt Controls
Installation/Operation Manual
C520M Rev B (6/92)
2.0 SCOPE
The information contained within this manual covers
the installation and operation of the MPT24DT,
MPT115DT, and MPT220DT Series Pan/Tilt Controls.
3.0 DESCRIPTION
The MPT24DT and MPT115DT Series controls are
designed to provide control for Pelco 24 VAC, 120 VAC,
and 230 VAC pan/tilts. Pan/tilt movement is controlled
by an eight position joystick (up, down, left, right and
simultaneous combinations of pan/tilt functions when
move diagonally).
In addition to manual control and continuous auto scan
operations, the MPTA24DT and MPTA115DT offer the
revolutionary new random scan feature available only
from Pelco. Random scan is a significant advance in
CCTV security/surveillance protection that makes con-
tinuous duty auto scan operations virtually obsolete.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Pelco Manual C520M Rev B (6/92) 3 4.0 INSTALLATION 4.1 CONNECTOR ASSEMBLY Installation and/or testing will require you to assemblethe connector parts provided. Fabricate the intercon-necting cable according to the following steps (refer-ence Figure 1). 1. Slide part A of the cable clamp (item 1) ove...
4 Pelco Manual C520M Rev B (6/92) Figure 2. Wiring Diagram FRONT VIEW CONTROL 14-PINPLUG 9-PINPLUG FRONT VIEW 1 3 5 6 7 8 9 1 3 5 6 7 8 14 P/T COMMON LEFT DOWN UP RIGHT SAFETY GROUND PAN/TILT 1 2 3 4 5 6 7 8 9 1 2 3 7 6 5 4 8 9 10 11 12 13 14
Pelco Manual C520M Rev B (6/92) 5 5.0 OPERATION AND SYSTEM TEST 5.1 MANUAL OPERATION TEST After installing the interconnecting cable between thepan/tilt and control, plug the control into the AC outlet,turn control on, and test operation using the followingprocedures: 1. Move the joystick to the UP ...
