Pelco MC5700-2X - Manual
Pelco MC5700-2X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFEGUARDS AND WARNINGS; DESCRIPTION; MODELS
- Page 3 – LOCATION AND FUNCTION OF PARTS; INSTALLATION; LENS; Compatible Lenses
- Page 4 – Changing the Plug on an Auto Iris Lens Cable; PLUG CHANGE ON AUTO IRIS LENS CABLE; Auto Iris Plug
- Page 5 – Lens Installation
- Page 6 – CAMERA/LENS GEOMETRY–GENERAL INFORMATION
- Page 8 – BACKFOCUS ADJUSTMENT
- Page 9 – CAMERA
- Page 10 – not
- Page 11 – SPECIFICATIONS; Adjusting the Incident Light Level; LEVEL
- Page 12 – REVISION HISTORY; REGULATORY NOTICES
MC5700 Series
1/3-Inch Monochrome
Camera
Installation/
Operation Manual
C1903M (4/99)
Pelco • 3
5
00
Pelco
Way
•
Clovis
,
CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Pelco Manual C1903M (4/99) IMPORTANT SAFEGUARDS AND WARNINGS 1. Installation and servicing should only be done by qualified service personnel andconform to all local codes. 2. To prevent fire or shock hazard, do not expose the unit to rain or moisture. C A U T I O N : RISK OF ELECTRIC SHOCK. DO NO...
Pelco Manual C1903M (4/99) 3 LOCATION AND FUNCTION OF PARTS Refer to Illustration B for the location of the camera parts listed below. NOTE: References to illus- trations in this manual arekeyed to the illustrations inthe manual that is suppliedwith the camera. B Tripod adapter (may beattached to to...
4 Pelco Manual C1903M (4/99) Be sure to attach the lens mount cap when the lens is not mounted. When using an auto-iris lens, use only a DC-driven type or a direct current drive coil with aresistance value over 150 ohms. When using an auto-iris lens, attach it as follows. For a manual lens, omit ste...
