Pelco MC3651H-2 - Manual
Pelco MC3651H-2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Models; IMPORTANT SAFEGUARDS AND WARNINGS
- Page 3 – Lens Mounting; Back Focus Adjustment; PIN
- Page 4 – Power and Video Connections; Power Supply Connections; Camera Mounting; To change the mount adapter position:
- Page 5 – AC Operation Only; Recommended Wire Gauge and Wiring Distances; Wire Gauge; require a minimum wire gauge of 20 AWG.; Maximum Distance
- Page 6 – LENS SETUP AND FOCUS PROCEDURES; Video Drive Auto Iris Lens; Fixed Lens; Manual Iris Lens; Zoom Lens
- Page 7 – BACK FOCUS ADJUSTMENT; To adjust the back focus:
- Page 8 – BLC; Internal; SWITCH SETTINGS
- Page 9 – the camera, sharpening the edges in the picture.; LC; Long Line Compensation; DS1 and; - Digital Slow Shutter
- Page 10 – CAMERA SYNCHRONIZATION (AC OPERATION ONLY); To synchronize the cameras do the following:
- Page 11 – SPECIFICATIONS; GENERAL
- Page 12 – WARRANTY AND RETURN INFORMATION
®
Installation/Operation
MC3651H-2 Series
DSP Monochrome Camera
C1985M-E (4/03)
Pelco World Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA •
www.pelco.com
USA & Canada: Tel: 800/289-9100 • Fax: 800/289-9150
International: Tel: 1-559/292-1981 • Fax: 1-559/348-1120
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
[ 2 ] Pelco Manual C1985M-E (4/03) Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service and installation personnel. 2. Installation shall be done in accordance with all local and national elec...
Pelco Manual C1985M-E (4/03) [ 3 ] CAMERA LAYOUT Figure 1. Camera Layout INSTALLATION Lens Mounting The camera can use a fixed iris, manual iris, or auto iris. The camera is factory set for a CS-mount lens,but is easily adjusted for a C-mount lens. 1. C-Mount Lens Only - Rotate the back focus adjust...
[ 4 ] Pelco Manual C1985M-E (4/03) Power and Video Connections The MC3651H-2 camera is designed to operate from a 12 VDC or 24 VAC power supply. The power sup-ply connections are shown in Figure 1. The LED on the back panel of the camera indicates that power isconnected. Use only a Class 2 isolated ...
