Pelco IDE - Manual - manualsarea.com

Page 2 - Product Overview

2 C2961M (10/09) Product Overview Figure 1. Camera Connections and Features

Page 4 - Installation; BACK BOX AND LENS

4 C2961M (10/09) Installation BACK BOX AND LENS For detailed instructions, refer to the ID Series Installation/Operation manual or the IDE Series Installation/Operation manual. Both are available on the resource disc. NOTE: Megapixel lenses are designed and tested to deliver optimal image quality to...

Page 8 - DOME LINER AND LOWER DOME

8 C2961M (10/09) DOME LINER AND LOWER DOME 1. Align the magnets on the dome liner with the magnets located on the back box (refer to Figure 9). Figure 9. Installing the Dome Liner 2. Attach the lower dome leash to the back box (refer to Figure 10). Figure 10. Attaching the Leash

Page 10 - Operation; IP ADDRESS SETTINGS

10 C2961M (10/09) Operation Once the camera is installed, apply power to the camera. The camera will start a configuration sequence: the green LED flashes five times per second for approximately two minutes, and then turns solid after the boot cycle is complete and the camera is on line. IP ADDRESS ...

Page 11 - MINIMUM SYSTEM REQUIREMENTS; ID SERIES; IDE SERIES; LOGGING ON TO THE CAMERA

C2961M (10/09) 11 MINIMUM SYSTEM REQUIREMENTS ID SERIES Processor: Intel ® Pentium ® 4 microprocessor, 1.6 GHz Operating System: Microsoft ® Windows ® XP, Windows Vista ® , or Mac ® OS X 10.4 (or later) Memory: 512 MB RAM Network Interface Card: 100 megabits (or greater) Monitor: Minimum of 1024 x 7...

Page 12 - LIVE PAGE ICONS

12 C2961M (10/09) LIVE PAGE ICONS Viewable icons are based on group permissions. Show Device List: Displays a list of viewable cameras connected to the same virtual local area network (VLAN) as the camera to which you are logged on. Disable Viewer: Closes the live view window. 1 x 1 Mode: Displays a...

Page 13 - SETTINGS PAGE; SYSTEM TAB

C2961M (10/09) 13 SETTINGS PAGE Depending on user permissions, the Settings page allows you to manage camera system settings, set up users and groups, and control the camera. To access the camera settings: 1. Log on to the camera. 2. Click the Settings link in the navigation bar located in the upper...

Page 14 - USERS AND GROUPS TAB

14 C2961M (10/09) A/V STREAMS TAB Use the A/V Streams tab to configure the video and audio streams for the camera. The A/V Streams tab includes a Video Presets page, a Video Configuration page, and an Audio Configuration page. Video Presets: The Video Preset page includes three fully-configured vide...

Page 15 - PRODUCT WARRANTY AND RETURN INFORMATION

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years: – Fiber optic products – TW300...

Pelco IDE - Manual

Table of Contents:

Summary

Other Pelco Models