Page 4 - List of Tables
4 C2649M (9/07) List of Tables A Audio Select Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 B Data Select Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 5 - Important Safety Instructions; receptacles, and the points where they exit from the apparatus.
C2649M (9/07) 5 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manu...
Page 6 - The product and/or manual may bear the following marks:; RISK OF ELECTRIC SHOCK.
6 C2649M (9/07) The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying...
Page 7 - Regulatory Notices; RADIO AND TELEVISION INTERFERENCE; This Class A digital apparatus complies with Canadian ICES-003.
C2649M (9/07) 7 Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired ...
Page 8 - Product Overview; DESCRIPTION
8 C2649M (9/07) Product Overview DESCRIPTION The FT106011/FR106011 fiber transmitter and receiver provide simultaneous transmission of one unidirectional video channel, two bidirectional audio channels, one bidirectional data channel, and one bidirectional contact closure over one optical fiber (ref...
Page 9 - MODELS; OPTIONAL ACCESSORIES
C2649M (9/07) 9 MODELS The FT106011/FR106011 fiber transmitter and receiver consist of the following series of models: Multimode Models:* FT106011MSTR Fiber optic video transmitter with two bidirectional audio channels, one bidirectional data channel, and one bidirectional contact closure; multimode...
Page 10 - FRONT PANEL; Troubleshooting
10 C2649M (9/07) FRONT PANEL The front panel of the FT106011 transmitter and FR106011 receiver provides LED indicators that allow you to monitor contact closure activation, audio signal status, data activity, video signal status, optical signal/laser status, and operating power (refer to Figure 2). ...
Page 11 - REAR PANEL; Installation
C2649M (9/07) 11 REAR PANEL All connections to the FT106011 transmitter and FR106011 receiver are made to the rear panel of the modules (refer to Figure 3). Figure 3. Rear Panel of FT106011 Transmitter and FR106011 Receiver For additional information about rear-panel connections, refer to the Instal...
Page 12 - PACKAGE CONTENTS; The following items are supplied:; SETTING THE AUDIO SIGNAL AND IMPEDANCE MODE
12 C2649M (9/07) Installation PACKAGE CONTENTS The following items are supplied: 1 FT106011 transmitter or FR106011 receiver 1 Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output 1 1 smal...
Page 13 - Switch Setting; impedance
C2649M (9/07) 13 Figure 4. Audio Select Switch Table A. Audio Select Switch Settings Switch Setting Audio Mode 0 (default setting) UNBAL 47K Ω: Unbalanced audio signals, 47K-ohm input impedance 1 BAL 600 Ω: Balanced audio signals, 600-ohm input impedance NOTE: Switch settings 2-9 are not used. If sw...
Page 14 - SETTING THE DATA COMMUNICATION MODE
14 C2649M (9/07) SETTING THE DATA COMMUNICATION MODE A Data Select switch, which is a 10-position rotary switch, is provided on the bottom of the FT106011 transmitter and the FR106011 receiver (refer to Figure 5). The Data Select switch allows you to set the data communication mode required for the ...
Page 15 - Coaxitron
C2649M (9/07) 15 Figure 5. Data Select Switch Table B. Data Select Switch Settings Switch Setting Data Communication Mode 0 (default setting) RS-232 1 RS-422 2 RS-485 2-Wire 3 RS-485 4-Wire 4 Manchester/Bi-Phase 5 Coaxitron NOTE: Switch settings 6-9 are not used. If switch setting 6-9 is selected, t...
Page 16 - MOUNTING THE TRANSMITTER/RECEIVER; MOUNTING THE TRANSMITTER/RECEIVER INTO A RACK; Designed to accommodate fiber optic modules as follows:; MOUNTING THE TRANSMITTER/RECEIVER TO A WALL; Mounting the Transmitter/Receiver Using the Wall Clip
16 C2649M (9/07) MOUNTING THE TRANSMITTER/RECEIVER The FT106011 transmitter/FR106011 receiver can be mounted into a rack or can be used as a stand-alone module. As a stand-alone module, the unit can be placed on a desktop or can be mounted to a wall. MOUNTING THE TRANSMITTER/RECEIVER INTO A RACK The...
Page 17 - two holes on the lower flange of the clip.
C2649M (9/07) 17 Mounting the Transmitter/Receiver Using the Wall Clip NOTE: Before mounting the FT106011 transmitter/FR106011 receiver to a wall, ensure that there is adequate space at both ends for viewing the front-panel LEDs and for making the various rear-panel cable connections. To attach the ...
Page 18 - CONNECTING THE TRANSMITTER/RECEIVER
18 C2649M (9/07) CONNECTING THE TRANSMITTER/RECEIVER Connections to the FT106011 transmitter and the FR106011 receiver are made on the rear panel of the modules (refer to Figure 7) and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VAC power supply can be used to power the tran...
Page 19 - Contact Closure Pin Assignments; Pin Number; In
C2649M (9/07) 19 Figure 7. FT106011 Transmitter/FR106011 Receiver Connections Table C. Contact Closure Pin Assignments Pin Number Contact Closure (CC) 1 In, Common 2 In 3 or 4 Out, Common 5 Out, Normally Open 6 Out, Normally Closed FIBER OPTIC CABLE COAXIAL CABLE PIN 2 PIN 1 PIN 11 PIN 12 CONTACT CL...
Page 22 - RS-232 Data Communication Wiring
22 C2649M (9/07) Figure 10. RS-232 Data Communication Wiring RS-232 DATA CONNECTIONS BETWEEN DEVICE B AND FT106011 TRANSMITTER RS-232 DATA CONNECTIONS BETWEEN DEVICE A AND FR106011 RECEIVER FT106011 TRANSMITTER – DATA CONNECTOR FR106011 RECEIVER – DATA CONNECTOR RS-232 DATA SELECTION DEVICE B DEVICE...
Page 23 - RS-422 Data Communication Wiring
C2649M (9/07) 23 Figure 11. RS-422 Data Communication Wiring RS-422 DATA SELECTION RS-422 DATA SELECTION RS-422 DATA CONNECTIONS BETWEEN DEVICE A AND FR106011 RECEIVER FT106011 TRANSMITTER – DATA CONNECTOR FR106011 RECEIVER – DATA CONNECTOR DEVICE B DEVICE A TX- 0 1 3 45 6 7 8 9 2 0 1 3 45 6 7 8 9 2...
Page 26 - Manchester Data Communication Wiring
26 C2649M (9/07) Figure 14. Manchester Data Communication Wiring FR106011 RE C EIVER – DATA C ONNE C TOR FT106011 TRAN S MITTER – DATA C ONNE C TOR MAN C HE S TER DATA S ELE C TION MAN C HE S TER DATA S ELE C TION MANCHESTER DATA CONNECTIONS BETWEEN DEVICE B AND FT106011 TRANSMITTER MANCHESTER DATA ...
Page 27 - Bi-Phase Data Communication Wiring
C2649M (9/07) 27 Figure 15. Bi-Phase Data Communication Wiring BI-PHASE DATA SELECTION BI-PHASE DATA SELECTION FT106011 TRANSMITTER – DATA CONNECTOR DEVICE B DEVICE A 0 1 3 45 6 7 8 9 2 TX+ TX- 0 1 3 45 6 7 8 9 2 SHIELD RX- RX+ RX+ RX- SHIELD TX- TX+ 7 5 6 8 4 3 1 2 7 5 6 8 4 3 1 2 FR106011 RECEIVER...
Page 28 - Balanced Audio Wiring
28 C2649M (9/07) Figure 16. Balanced Audio Wiring AUDIO OUT LEFT AUDIO OUT RIGHT AUDIO IN LEFT AUDIO IN RIGHT DEVICE A FR106011 RECEIVER – AUDIO CONNECTOR BALANCED AUDIO CONNECTIONS BETWEEN DEVICE A AND FR106011 RECEIVER DEVICE B FT106011 TRANSMITTER– AUDIO CONNECTOR BALANCED AUDIO CONNECTIONS BETWE...
Page 29 - Unbalanced Audio Wiring
C2649M (9/07) 29 Figure 17. Unbalanced Audio Wiring AUDIO OUT LEFT AUDIO OUT RIGHT AUDIO IN LEFT AUDIO IN RIGHT DEVICE A SHIELD SHIELD FR106011 RECEIVER – AUDIO CONNECTOR UNBALANCED AUDIO CONNECTIONS BETWEEN DEVICE A AND FR106011 RECEIVER DEVICE B FT106011 TRANSMITTER – AUDIO CONNECTOR UNBALANCED AU...
Page 30 - Troubleshooting with Front-Panel Indicators; Indicator Color
30 C2649M (9/07) Troubleshooting LED indicators on the front panel of the FT106011 transmitter/FR106011 receiver (refer to Figure 2) allow you to monitor signal status, laser status, data activity, contact closure activation, and operating power. Table F provides information about the front-panel in...
Page 31 - Setting the
C2649M (9/07) 31 Audio Present LED ( ) Green Audio is being trans-mitted onto the fiber by the audio port or is being received from the fiber by the audio port. – No action required. Red The Audio Select switch is set to an invalid position. The Audio Select switch is set to any of the following pos...
Page 33 - or; Optic Fault LED
C2649M (9/07) 33 Video Present LED ( or ) Green Incoming video signal is present on the channel. — No action required. Red on transmitter Incoming video signal is not present on the channel. Video source is not powered on. Check power connection to the video source. Video source is not connected to ...
Page 35 - Specifications; VIDEO
C2649M (9/07) 35 Specifications VIDEO Number of Channels 1 Modulation Type Pulse code modulation, 10-bit resolution Video Input (FT106011)/ 1.0 Vp-p, 75 ohms, NTSC, PAL, and SECAM Video Output (FR106011) Bandwidth 6.5 MHz Gain Unity Differential Gain <1% Differential Phase <0.7° Tilt <1% Si...
Page 39 - PRODUCT WARRANTY AND RETURN INFORMATION; REVISION HISTORY
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on fiber optic products and TW3...
