Page 3 - Important Safety Instructions
C1641M-A (3/05) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the ma...
Page 5 - Regulatory Notices; RADIO AND TELEVISION INTERFERENCE
C1641M-A (3/05) 5 Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesire...
Page 6 - Product Overview; DESCRIPTION
6 C1641M-A (3/05) Product Overview DESCRIPTION The FT8301/FR8301 fiber transmitter and receiver provide the ability to transmit one composite video channel over one optical fiber (refer to Figure 1). Figure 1. Single-Channel Video FT8301 Transmitter and FR8301 Receiver Features of the FT8301/FR8301 ...
Page 7 - MODELS
C1641M-A (3/05) 7 MODELS The FT8301/FR8301 fiber transmitter and receiver consist of the following series of models: Multimode Models: FT8301MST Single-channel fiber optic video transmitter; multimode, ST connector; transmission distance up to 2 km FR8301MSTR Single-channel fiber optic video receive...
Page 8 - FRONT PANEL; FRONT PANEL - FT8301 TRANSMITTER
8 C1641M-A (3/05) FRONT PANEL The front panel of the FT8301 transmitter and the FR8301 receiver provides LED indicators that allow you to monitor signal status and operating power. The following sections provide a view of the front panel of the FT8301 transmitter and the FR8301 receiver. FRONT PANEL...
Page 9 - FRONT PANEL - FR8301 RECEIVER
C1641M-A (3/05) 9 FRONT PANEL - FR8301 RECEIVER Figure 3 illustrates the front panel of the FR8301 receiver. Figure 3. Front Panel of FR8301 Receiver VIDEO PRESENT LED CARRIER DETECT LED POWER LED (Pelco badge) For detailed information about the front-panel indicators, refer to the Troubleshooting s...
Page 10 - REAR PANEL; REAR PANEL - FT8301 TRANSMITTER
10 C1641M-A (3/05) REAR PANEL Connections to the FT8301 transmitter and the FR8301 receiver are made to the rear panel of the modules. The following sections provide a view of the rear panel of the FT8301 transmitter and the FR8301 receiver. REAR PANEL - FT8301 TRANSMITTER Figure 4 illustrates the r...
Page 11 - REAR PANEL - FR8301 RECEIVER
C1641M-A (3/05) 11 REAR PANEL - FR8301 RECEIVER Figure 5 illustrates the rear panel of the FR8301 receiver. Figure 5. Rear Panel of FR8301 Receiver RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of rack-mounted module STANDALONE POWER CONNECTOR, 2-pin connector for power conn...
Page 12 - Installation; PACKAGE CONTENTS; With the FT8301 transmitter:; MOUNTING; MOUNTING THE FT8301 TRANSMITTER
12 C1641M-A (3/05) Installation PACKAGE CONTENTS The following items are supplied: • With the FT8301 transmitter: 1 Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European confi gurations); 100-240 VAC input, 12 VDC output 1 FT8301/FR8301 Fiber Transm...
Page 13 - Mounting the FR8301 Receiver to a Wall
C1641M-A (3/05) 13 MOUNTING THE FR8301 RECEIVER The following sections provide information about mounting the FR8301 receiver into a rack or onto a wall. Mounting the FR8301 Receiver into a Rack The FR8301 receiver can be installed into an RK5000 Series rack mount chassis, which can be mounted into ...
Page 14 - Mounting the FR8301 Receiver Using the Wall Clip
14 C1641M-A (3/05) Mounting the FR8301 Receiver Using the Wall Clip NOTE: Before mounting the FR8301 receiver to a wall, ensure that there is adequate space at both ends for viewing the front-panel LEDs and for making the various rear -panel cable connections. To attach the FR8301 receiver to a wall...
Page 15 - CONNECTIONS; CONNECTING THE FT8301 TRANSMITTER
C1641M-A (3/05) 15 CONNECTIONS Connections to the FT8301 transmitter and the FR8301 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTE: A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a standalone module...
Page 16 - CONNECTING THE FR8301 RECEIVER
16 C1641M-A (3/05) CONNECTING THE FR8301 RECEIVER Figure 9 illustrates FR8301 receiver connections. Figure 9. FR8301 Receiver Connections POWER/ALARM CONNECTIONFOR RACK-MOUNTED MODULE* FIBER OPTIC CABLE COAXIAL CABLE † POWER CONNECTIONFOR STANDALONE MODULE† *REFER TO THE RK5000PS-3U/RK5000-3U FIBER ...
Page 17 - Troubleshooting; Indicator Color
C1641M-A (3/05) 17 Troubleshooting LED indicators on the front panel of the FT8301 transmitter/FR8301receiver (refer to Figure 2 and to Figure 3, respectively) allow you to monitor signal status and operating power. Table A provides information about the front-panel indicators and associated trouble...
Page 18 - Video Present LED
18 C1641M-A (3/05) Video Present LED Green Incoming video signal is present on the channel. – No action required. Not lit on transmitter Incoming video signal is not present on the channel. Video source is not powered on. Check power connection to the video source. Video source is not connected to t...
Page 19 - Carrier Detect LED
C1641M-A (3/05) 19 Carrier Detect LED (Receiver Only) Green The optical signal is being received from the transmitter. – No action required. Red The optical signal is not being received from the transmitter. Transmitter is not powered on. Check power connections. Replace power supply if necessary. F...
Page 20 - Specifications; VIDEO
20 C1641M-A (3/05) Specifications VIDEO Number of Channels 1 Modulation Type Pulse code modulation, 8-bit resolution Video Input 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Bandwidth 6.5 MHz Gain Unity Differential Gain <2% Differential Phase <1° Tilt <1% Signal-to-Noise Ratio >60 dB (CCIR w...
Page 23 - PRODUCT WARRANTY AND RETURN INFORMATION
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic...
