Pelco EM1015U - Manual
Pelco EM1015U – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; To attach the mount, perform the following steps:; Make; SERVICE MANUAL
- Page 3 – SPECIFICATIONS; Aluminum
- Page 4 – REVISION HISTORY; Date; Figure 2. EM1900U Dimension Drawing; WARRANTY AND RETURN INFORMATION
C202M-B (4/99)
EM1009U/EM1015U/EM1900U
Enclosure Mounts
3500 Pelco Way,
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel (1-559) 292-1981
FAX (1-559) 348-1120
www.pelco.com
®
This symbol indicates that danger-
ous voltage constituting a risk of
electric shock is present within
this unit.
This symbol indicates that there
are impor tant operating and main-
tenance instructions in the litera-
ture accompanying this unit.
C A U T I O N :
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
L I S T E D
UL
®
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1.
Installation and servicing should only be done by qualified service and installation personnel.
2.
Installation shall be done in accordance with all local and national electrical and mechani-
cal codes utilizing only approved materials.
3.
Use only installation methods and materials capable of supporting four times the maxi-
mum specified load.
4.
Use stainless steel hardware to fasten the mount to outdoor surfaces.
5.
To prevent damage from water leakage when installing a mount outdoors on a roof or
wall, apply sealant around the bolt holes between the mount and mounting surface.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
DESCRIPTION
The EM1009U/EM1015U/EM1900U mounts are capable of supporting loads up to 40 pounds
(18 kg) and are designed for ceiling, pedestal, and wall applications. These versatile mounts
can be used with enclosures that have a 2-inch (5.08 cm) mounting hole pattern.
Constructed of aluminum, all three mounts feature a manually adjustable swivel head that al-
lows 360-degree horizontal positioning of the enclosure. In addition, there is a 1-inch (2.54 cm)
diameter cable feedthrough hole and openings in the top and bottom to conceal the wiring.
Models
EM1009U
Universal, medium-duty, pedestal/ceiling mount with manually adjustable
swivel head. Mount extends 10.66 inches (27.08 cm) from wall or ceiling.
EM1015U
Universal, medium-duty, pedestal/ceiling mount with manually adjustable
swivel head. Mount extends 16.66 inches (42.32 cm) from wall or ceiling.
EM1900U
Universal, medium-duty, 90-degree wall mount with manually adjustable
swivel head. Mount extends 14.98 inches (38.05 cm) from wall or ceiling.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION To attach the mount, perform the following steps: 1. Determine the location where the mount is to be installed. 2. Using the mount as a template, mark and drill holes in the mounting surface. 3. Bring the wiring in from the cable hole in the mounting plate or the side of the mount neart...
SPECIFICATIONS Construction: Aluminum Finish: Gray polyester powder coat Maximum Load: 40 lb (18 kg) Pan Adjustment: 360 ° Tilt Adjustment: ± 75 ° Locking Method: 3/8-16 hex bolts EnclosureMounting: Two 1/4-20 x 0.625-inch (1.588 cm) hex bolts (provided) SuggestedMounting Method: Secure to solid sur...
® Pelco, the Pelco logo, Spectra, Esprit, Genex, Legacy, and Camclosure are registered trademarks of Pelco.™ Endura and ExSite are trademarks of Pelco. © Copyright 2000, Pelco. All rights reserved. REVISION HISTORY Manual # Date Comments C202M 4/91 Original version. C202M-A 2/98 Improved, stronger v...
