Pelco EH2200 - Manual
Pelco EH2200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Camera Mounting
- Page 3 – MAINTENANCE; Mechanical Parts List; Qty; SPECIFICATIONS; MECHANICAL; Adjustable tilt table; GENERAL; See Figure 3
- Page 4 – REVISION HISTORY; Date; PRODUCT WARRANTY AND RETURN INFORMATION; WARRANTY
C1467M-A (3/00)
EH2200
Indoor Enclosure
®
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1.
Installation and servicing should only be done by qualified service personnel and conform
to all local codes.
2.
Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclo-
sure, it is designed for indoor use only and it must not be installed where exposed to rain
and moisture.
3.
Only use replacement parts recommended by Pelco.
4.
The installation method and materials should be capable to supporting four times the
weight of the enclosure, camera and lens combination.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
This symbol indicates that danger-
ous voltage constituting a risk of
electric shock is present within
this unit.
This symbol indicates that there
are important operating and main-
tenance instructions in the litera-
ture accompanying this unit.
C A U T I O N :
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
3500 Pelco Way,
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel +1 (559) 292-1981
FAX +1 (559) 348-1120
www.pelco.com
DESCRIPTION
The EH2200 is a medium security enclosure that mounts to the corner of two walls. It can be
installed flush against the ceiling or mid-wall in high ceiling applications. The enclosure’s com-
pact design is perfect for small cameras. Total camera and lens length must not exceed 5
inches (12.70 cm).
INSTALLATION
The following items are supplied:
1
5/32-inch hex key
1
Camera mounting screw, 1/4-20 x .375-inch, Phillips, pan head
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
To install the EH2200 refer to Figure 1 anddo the following: 1. Ensure that the mounting surface iscapable of supporting four times theweight of the enclosure, camera andlens. 2. Remove the cover by loosening thetamper-resistant screw with theenclosed hex key. 3. Remove the tilt table assembly. 4. D...
MAINTENANCE Clean the window regularly to help maintain picture clarity. Use a soft cloth and a mildnonabrasive detergent. To order replacement parts, refer to Table A. Table A. Mechanical Parts List Qty Description Part Number 1 Mounting bracket weld assembly EH22001001WA 1 Cover weld assembly EH22...
® Pelco, the Pelco logo, Spectra, Genex, Legacy, and PelcoVision are registered trademarks of Pelco. ™Esprit and Camclosure are trademarks of Pelco. ® LEXAN is a registered trademark of the General Electric Company. © Copyright 2000, Pelco. All rights reserved. REVISION HISTORY Manual # Date Comment...
