Pelco DX8116 - Manual
Pelco DX8116 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Tech
Tech
Tips
Helpful Tips for Pelco Products
World Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco.
Information subject to change without notice.
©Copyright 2006, Pelco. All rights reserved.
Page 1 of 1 DX8100_DX9200HDD1.fm
DX8100 DVR
DX9200HDDI SUPPORT LIMITATIONS
October 23, 2006
DX9200HDDI WORKS WITH DX8108 AND DX8116
There has been confusion recently as to whether the DX9200HDDI is compatible with the DX8100.
A SCSI card recently qualified that works with the DX8100 and DX9200HDDI, however, due to hard-
ware limitations the card
only works with the DX8108 and DX8116 units
.
NOTE: The
DX9200HDDI
does not work with the DX8124 and DX8132 because these units
do not have a viable slot available for the SCSI card.
To connect the DX9200HDDI to the DX8100 do the following:
1. Install the optional DX8100-ISCI internal SCSI interface card in slot 2.
2. Move the main Capture card to slot 3.
This procedure will be covered in detail in the
DX8100-ISCI Installation
manual.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
