Pelco DX7100 - Manual
Pelco DX7100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – For 480 GB models only:; Count to 7, and then press the Enter key.
- Page 6 – YES
- Page 7 – REVISION HISTORY; Date
C1671M (5/05)
Digital Video Recorder
DX7100
DX7100 Series
Recovery
Instructions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
C1671M (5/05) 5 7. Press the Enter key. The First Boot Device dialog box opens. Scroll down to CDROM, and then press the Enter key to make the CD-ROM the first boot device. 8. Repeat steps 6 and 7 for the second and third boot devices. Select SCSI for the second boot device, and select HDD-0 for the...
6 C1671M (5/05) 12. A message appears telling you to “Press any key to boot from CD.” Press the Enter key to start the reimaging tool. Wait a few minutes until the Pelco Recovery Tool dialog box opens. 13. If you want to proceed with the recovery process, type YES in the text box, and then click OK....
C1671M (5/05) 7 16. In the CMOS Setup Utility, select Advanced BIOS Features. Press the Enter key. 17. In the First Boot Device dialog box, scroll to HDD-0 and then press the Enter key to make the hard drive the first boot device. 18. Press the F10 key to save the change. 19. A message appears in th...
