Pelco DEMOKIT-P - Manual
Pelco DEMOKIT-P – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C2452M-C (7/03)
DEMOKIT-F/DEMOKIT-P
Spectra III/Spectra III SE Demo Kit
Pelco World Headquarters • 3500 Pelco Way • Clovis, California 93612 USA •
www.pelco.com
USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150
International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120
®
NOTE:
Demonstration unit only, no certification required.
IMPORTANT:
This
product is factory
set to operate at
115 VAC. For 230 VAC opera-
tion, move the switch to the
230 VAC position before apply-
ing power to the unit.
NOTE:
Extra fuses are sup-
plied with the equipment. To
change the fuse, use a small
screwdriver and remove the
fuse cover.
VIDEO
OUT
KEYBOARD
MONITOR
POWER OUT
ALARM OUT
COM
RX-
RX+
POWER IN
POWER OUT TO MONITOR
KBD 300 INPUT
AUX 1 OUTPUT
VIDEO OUT TO MONITOR
2 WIRE CONTROL D OR P PROTOCOL
TIGHTEN SET SCREWS
TO SECURE ASSEMBLY
ON/OFF SWITCH
115 VAC
230 VAC
FUSE COVER
N/O AND N/C
FOR ALARM
Rx- (RED)
Rx+ (BLACK)
ALARM 1 (WHITE)
AUX 2 (VIOLET)
GROUND (BROWN)
VIDEO
24 VAC (ORANGE)
24 VAC (GREEN)
JUMPER WIRE
(BROWN)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
