Pelco DD53C22-X - Manual
Pelco DD53C22-X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Worldwide Headquarters; Label Position
- Page 3 – O P E R AT I O N / P R O G R A M M I N G
- Page 5 – CONTENTS
- Page 7 – WELCOME; technology and; Getting Started; CONFIGURE DONE
- Page 8 – HOW TO OPERATE YOUR DOME SYSTEM
- Page 10 – PelcoNet; Click the preset 95 button. The main menu appears.
- Page 11 – QUICK START GUIDE – SYSTEM SETUP; Presets; Preset; Quick Programming Guide; Accessing Main Menu
- Page 12 – LANGUAGE; To change the display language:
- Page 13 – SYSTEM INFORMATION; Use the following steps to display the System Information screen:
- Page 14 – DISPLAY SETUP
- Page 16 – DOME SETTINGS; TYPE OF LIGHTING; INDOOR; AUTO FOCUS; There are two auto focus settings:
- Page 17 – Settings include the following:
- Page 18 – SHUTTER SPEED; sensed by the camera.; AGC LIMIT
- Page 19 – AUTO IRIS; determined by the Auto Iris Level setting.; Auto Iris Level
- Page 20 – AUTO SHARPNESS; There are two settings:; AUTO WHITE BALANCE; see the color change on your monitor.
- Page 21 – VIDEO LEVEL; Set the video output to one of the following:
- Page 22 – AUTO FLIP; There are two auto flip modes:; PROPORTIONAL PAN; There are two proportional pan modes:
- Page 23 – PARK TIME; Park Action; AUTO SCAN - Dome starts auto scan operation.
- Page 24 – and guarantees that blanked areas will not
- Page 25 – LIMIT STOPS; There are two types of limit stops:; NOTE; To clear manual or scan stops:
- Page 26 – AZIMUTH ZERO
- Page 27 – POWER UP ACTION; The following settings are available:
- Page 34 – Increase the
- Page 35 – Blank All Above; Blank All Below
- Page 40 – REPEAT
- Page 41 – ACK ACTION; alert condition persists.; ACTIVATE AUX; The high pressure alert occurs if the pressure is above 11 PSIG.; ALERT RESET
- Page 43 – At least one character must be entered to create a valid password.
- Page 45 – SOFTWARE/LANGUAGE FILE UPLOAD; performed if the dome system is operating properly.; UPLOAD ICON; Upload Icon
- Page 46 – SPECIFICATIONS
- Page 47 – REVISION HISTORY; REGULATORY NOTICES; Reorient or relocate the receiving antenna.
A D D E N D U M
Addendum No.
C2499M-A
Date
November 17, 2005
Manuals Affected
Spectra III
™
SE Series Dome Drive Manuals:
C2443M-C, C2444M-C,
and
C2445M-D
Manual Update
The following are manual changes for Spectra III SE software Version 1.28 and greater and instructions for accessing a
Spectra III EVS dome system.
Presets
Spectra III SE system presets have been upgraded from 80 to 150. Each of the user-definable presets can be programmed to use pan, tilt, camera settings,
and motion detection. The programmable presets are numbered 1-32, 35-82, and 100-150.
The following presets are predefined for specific functions:
Title Text
Title Text has been added to the Dome Settings menu. The title text is the
label used to identify the camera when it is viewed on the monitor. Up to
20 characters can be used for a title.
To edit the title text label, do the following:
1. Use the joystick to position the cursor beside EDIT TITLE TEXT.
2. Press Iris Open.
3. Use the joystick to position the cursor beside a character. Press Iris Open to select the character. To clear a
character, position the cursor beside BACKSPACE and then press Iris Open.
4. When the title is completed, move the cursor to OK. Press Iris Open to return to the Title Text menu.
5. Enable the title text label by doing the following:
a.
Move the cursor beside ENABLE TITLE TEXT.
b.
Press Iris Open. The cursor moves to the right.
c.
Move the joystick up or down to view the selections. Select ON and then press Iris Open to enable the title text.
33
“Flip” command
95
Select main programming menu
34
“Pan zero” command
96
Stop a scan
88
IR filter IN (color)
97
Random scanning
89
IR filter OUT (black-white)
98
Frame scanning
90-91 Manual limit stops
99
Start auto scanning
92-93 Scan limit stops
(Continued on next page)
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
DOME SETTINGS
ENABLE TITLE TEXT
<EDIT TITLE TEXT>
BACK
EXIT
TITLE TEXT
LABEL FOR PRESET
PRESET NUMBER - - - - - -
1234567890 OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZ.,-/ SPACE
abcdefghij BACKSPACE
klmnopqrst
uvwxyz*;:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150 International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120 Pelco and the Pelco logo are registered trademarks of Pelco. ©Copyright 2005, Pelco. All rights re...
Spectra III ™ SE Series C2444M-C (1/04) ® O P E R AT I O N / P R O G R A M M I N G Models DD53C22 & DD53C22-X
2 C2444M-C (1/04) CONTENTS WELCOME ................................................................................................................................................................................................ 5 GETTING STARTED .........................................................
