Pelco CV-D2000 - Manual
Pelco CV-D2000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C1006RN (1/09)
Page 1 of 2
IPIX IP Cameras Supported on Digital Sentry
Integral Digital Sentry
®
digital video management systems (DVMS) support certain
IPIX
®
IP camera models. The camera models listed in this document can be used with
Digital Sentry IP camera driver 6.8.0.126 and later. Refer to each camera’s table for
information about the hardware and software features validated for use on a Digital
Sentry system. Any general limitations or special instructions are listed at the beginning
of the document, and any model-specific information is listed after each table. For
information about the general usage of each camera, refer to the camera manufacturer’s
documentation.
To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer
to the Pelco Web site at
www.pelco.com
.
IPIX CommandView
™
Dome CV-D2000
IPIX CommandView Dome CV-D3000
Firmware
N/A
Supported Resolutions
1600 x 1200
Frames per Second (FPS)
1 to 20
Number of Quality Settings
10
Supported Codec
MJPEG
Supported Motion Detection In-Camera
Pan/Tilt/Zoom (PTZ)
Yes (solid state)
Firmware
N/A
Supported Resolutions
2048 x 1536
FPS
1 to 12
Number of Quality Settings
10
Supported Codec
MJPEG
Supported Motion Detection In-Camera
PTZ
Yes (solid state)
Release Notes
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
