Pelco CM9760-PEX - Manual - manualsarea.com

Page 2 - REVISION HISTORY; CONTENTS; LIST OF ILLUSTRATIONS

2 Pelco Manual C546M (8/98) REVISION HISTORY Manual # Date Comments C546M 8/98 Original version. CONTENTS Section Page 1.0 GENERAL .................................................................................................. 3 1.1 IMPORTANT SAFEGUARDS AND WARNINGS .................................

Page 3 - Only use replacement parts recommended by Pelco.; The product and/or manual may bear the following marks:; RISK OF

Pelco Manual C546M (8/98) 3 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should beobserved. 1. Installation and s...

Page 4 - Each expansion card and

4 Pelco Manual C546M (8/98) Figure 1. Fully Populated CM9760-PEX (Port Expander) Rear View. 2.0 DESCRIPTION The Pelco CM9760-PEX (Port Expander) is designed to increase the number ofdevices that can be connected to a CM9760-CC1, using additional serialcommunication channels to increase port density....

Page 6 - Input Ports; CM9760-PEX Front View with Card Installation

6 Pelco Manual C546M (8/98) 3.0 INSTALLATION 3.1 HARDWARE 3.1.1 Card Expansion Installation Each port expander card has its own microprocessor and power regulator. Nocommunication exists between port expander cards. Cards are installed from the front of the unit after the quick-disconnect screws whi...

Page 7 - Expansion Card DIP Switch Configuration

Pelco Manual C546M (8/98) 7 3.1.2 DIP Switch Settings Each port expansion card, before being installed into the CM9760-PEX card cageshould be properly configured with respect to DIP switch settings. The switchsetting positions configure communication attributes as well as condition the PEXfor the de...

Page 8 - Pin Connections Between a CM9760-PEX and Pelco Receiver/Drivers; Pelco Receiver/Drivers; DO NOT

8 Pelco Manual C546M (8/98) Figure 4. Pin Connections Between a CM9760-PEX and CM9760-CC1 Figure 5. Pin Connections Between a CM9760-PEX and Pelco Receiver/Drivers 3.1.3.1 Connection Between a CM9760-PEX and a CM9760-CC1 The connection of a CM9760-PEX and a CM9760-CC1 is illustrated in Figure 4.Ever...

Page 9 - Pin Connections Between a CM9760-PEX and a Multiplexer; Multiplexers

Pelco Manual C546M (8/98) 9 Figure 6. Pin Connections Between a CM9760-PEX and a Multiplexer Figure 7. Pin Connections Between a CM9760-PEX and CM9760-KBD 3.1.3.3 Connection Between a CM9760-PEX and Multiplexers The connection of a Multiplexer to a CM9760-PEX is illustrated in Figure 6. OneMultiplex...

Page 10 - Example of Port Expander as Part of CM9760 System

10 Pelco Manual C546M (8/98) 3.1.4 System Illustration Figure 8 illustrates a port expander included in a hypothetical CM9760 system setup. Figure 8. Example of Port Expander as Part of CM9760 System

Page 11 - Receiver/driver address; Receiver/Driver Address; Address Lookup Details

Pelco Manual C546M (8/98) 11 3.2 SOFTWARE 3.2.1 Address Details Normally, up to 16 camera receiver/drivers can be connected to one SerCom 8 porton a CM9760-CC1; however, up to 128 camera receiver/drivers can be connectedto the same port through expansion by using a Port Expander. Camera receiver/dri...

Page 12 - Comms Configuration for Receiver/Drivers

12 Pelco Manual C546M (8/98) 3.2.2 Software Considerations We now expand the previous section (using receiver/drivers as the attacheddevice) to include the configuration of the necessary software files that need to besetup before successful operation of the PEX can be realized. Two Setup files in th...

Page 13 - Camera File Configuration

Pelco Manual C546M (8/98) 13 Figure 10. Camera File Configuration Figure 10 illustrates the other file we previously mentioned-the camera (.CAM) file.It is here that address parameters for each attached receiver/driver is uniquelyidentified. Also note that this file is used to configure multiplexers...

Page 14 - GUIDELINES FOR PORT EXPANDER USE; Keyboards

14 Pelco Manual C546M (8/98) 4.0 GUIDELINES FOR PORT EXPANDER USE The following points are listed as Pelco recommended guidelines for port expanderuse. The reason the port expander exists at all is to extend the current port limit pastthat physically allowed by the CM9760-CC1. Even though, the 32 po...

Page 15 - ELECTRICAL; Power; COMMUNICATIONS; Data Ports; MECHANICAL; Connectors; GENERAL

Pelco Manual C546M (8/98) 15 5.0 SPECIFICATIONS ELECTRICAL Input Voltage: 120 VAC or 230 VAC 50/60 Hz. ± 10%, selectable Power Consumption: 100 VA Fusing: 2 Amps COMMUNICATIONS Data Ports Input: DB-9,RS-422 male connectorsDIP switch selectable baud rate Output: DB-9, RX-422 female connectorsDIP swit...

Page 16 - WARRANTY AND RETURN INFORMATION; WARRANTY

16 Pelco Manual C546M (8/98) 6.0 WARRANTY AND RETURN INFORMATION Pelco, the Pelco logo, Camclosure, Esprit,Genex, Legacy, and Spectra are registeredtrademarks of Pelco.Endura and ExSite are trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, with...

Pelco CM9760-PEX - Manual

Table of Contents:

Summary

Other Pelco Models