Pelco CM9760-MGR - Manual
Pelco CM9760-MGR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ADDENDUM; To program camera viewing access:
- Page 4 – To program camera control access:
- Page 6 – PTZ CONTROL THROUGH A GENEX MULTIPLEXER; To control a multiplexer:; Camera Access; section of this addendum.
- Page 7 – To set the blink time:; COMPATIBILITY WITH CM9760-SAT SATELLITE SWITCHERS
ADDENDUM
C547M-B (9/02)
September 2002
Addendum to Installation/User Manual C547M-B
for the CM9760-MGR Software
Future revisions of the manual will include this information. Should you need technical
assistance with this product, please call
(800) 289-9100
or
(559) 292-1981
.
®
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 • USA • Pelco Online @ http://www.pelco.com
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 • DataFAX (1-559) 292-0435
This addendum covers changes made to the CM9760-MGR in software version 7.80. This software upgrade adds
the following features.
1.
Restricting access to cameras so only specified users can view or control them.
2.
Control of pan, tilt, and zoom (PTZ) equipment through a Genex
®
multiplexer.
3.
On-screen character blinking to reduce characters “burning in” on the monitor tube.
4.
Compatibility with CM9760-SAT satellite switchers.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ADDENDUM — (9/02) 1 1. CAMERA ACCESS You can create up to 32 groups of cameras and then decide on which monitors the cameras can be viewed and/or which operatorscan control cameras with PTZ functions. 1.1. CAMERA ACCESS FOR VIEWING (C/M GROUP) This feature allows you to create up to 32 groups of cam...
ADDENDUM — (9/02) 3 1.2 CAMERA ACCESS FOR PTZ CONTROL (C/C GROUP) This feature allows you to create up to 32 groups of cameras and then to assign the groups of cameras to specific operators for PTZcontrol. Here is an example of how this feature might be used in an installation: Cameras 1, 2, 3, and ...
ADDENDUM — (9/02) 5 2. PTZ CONTROL THROUGH A GENEX MULTIPLEXER To control a multiplexer: 1. With the CM9760-MGR software running, select 9760 SETUP from the tool bar. 2. In the Configuration Files dialog box, click the Cameras tab. 3. In the Defined Cameras window, highlight the line for the physica...
