Pelco CM9760-KBD-E80 - Manual
Pelco CM9760-KBD-E80 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – INTRODUCTION; Chip extraction tool, part number ICPULLERTOOL
- Page 4 – UPGRADING CM9760-KBD FIRMWARE; Set DIP switch 7 to the correct position:
- Page 5 – U3 EPROM CHIP; Power on the KBD by reconnecting the cable to the COM 1 port.
- Page 6 – Joystick Setup Menu
- Page 7 – UPGRADING CM9760-KBR FIRMWARE; CABLE; RACK
- Page 8 – Power on the KBR by reconnecting the cable to the COM 1 port.
- Page 11 – REVISION HISTORY; Date; Original version; WARRANTY AND RETURN INFORMATION
System 9760
®
KBD/KBR Firmware
Upgrade
C1543M-A (7/04)
®
I N S T A L L A T I O N M A N U A L
CM9760-KBD-E80
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
C1543M-A (7/04) 1 INTRODUCTION The System 9760 ® keyboard upgrade kit, CM9760-KBD-E80, provides the following items to upgrade CM9760-KBD/CM9760-KBR firmware to version 8.03: 1 U3 EPROM chip, version 8.03, part number IC53-0043-0803 1 Chip extraction tool, part number ICPULLERTOOL This manual provid...
2 C1543M-A (7/04) 1 2 3 4 5 6 7 8 CABLE NO DIP SWITCH 7 Options Relay Com3 Com2 Com1 Volume Reset (MAY HAVERETAININGNUT) SCREW (9) UPGRADING CM9760-KBD FIRMWARE CAUTION: Only qualified personnel observing electrostatic discharge (ESD) precautions should perform the procedure below. Always wear a gro...
C1543M-A (7/04) 3 CIRCUITBOARD U4 U12 U5 U2 NOTCHED ENDOF EPROM ALIGNMENTNOTCH U3 U3 EPROM CHIP 6. Remove the existing U3 EPROM chip (refer to Figure 2) from its socket using the provided extraction tool. Remove the chipslowly to avoid damaging the socket. 7. Remove the replacement EPROM chip from t...
