Pelco CM9760-KBD-E35 - Manual
Pelco CM9760-KBD-E35 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; To change the U3 PROM chip on the KBD motherboard:; Removing the CM9760-KBD Bottom Cover
- Page 3 – Replacing the U3 PROM Chip
- Page 4 – PRODUCT WARRANTY AND RETURN INFORMATION; WARRANTY
SYSTEM 9760
®
KBD FIRMWARE INSTALLATION INSTRUCTIONS
C1500M (9/99)
IMPORTANT SAFEGUARDS AND WARNINGS
IMPORTANT:
Performing the System 9760 KBD upgrade does not erase user-programmed information in existing keyboards.
CAUTION
:
Only qualified personnel observing Electrostatic Discharge (ESD) precautions should perform the procedures described in this document. Always
wear a grounding strap connected to an approved grounding source when working on or around exposed electronic components. Handle circuit
boards by their edges.
DESCRIPTION OF CHANGES
The instructions in this manual cover the installation of the following items:
CM9760-KBD-E75
System 9760 KBD Software
Upgrade
Instructions
Package contents:
1
System 9760 KBD software U3 PROM chip,
version 7.50, p/n IC53-0043-2750
1
Chip Extraction Tool
Not included, but needed:
1
Phillips screwdriver
3500 Pelco Way, Clovis • CA 93612-5699 • USA
In North America & Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel +1 (559) 292-1981 • FAX +1 (559) 348-1120
www.pelco.com
¤
OR
CM9760-KBD-E35
System 9760 KBD Firmware
Downgrade
Kit
Package contents:
1
System 9760 KBD software U3 PROM chip,
version 3.50, p/n IC53-0006-2305
1
Chip Extraction Tool
Not included, but needed:
1
Phillips screwdriver
The chip provided in this package is for upgrading KBDs that have version 3.11 or
earlier software. To enable the full feature set embodied in this package, the MGR
and system software should be at the corresponding version level (7.50.000). The
expanded feature set includes:
Feature Set:
✓
Feature set of button key define functions commensurate with
9760MGR version 7.50.000
✓
Date format entry changed from day-month-year to month-day-year
✓
“Preset delete” option moved to the Define Preset Menu
✓
Parity byte selection for Coms 1-3 can be changed to none, even or odd
Button Key Functions Added:
✓
MAC Group X
✓
ALT BWD
Functions Added:
✓
Options to define PIN in direct control mode
✓
GPI selection range extended
Follow the INSTALLATION instructions starting on page 2
The chip provided in this package is for downgrading new KBD orders to allow
them to be used with version 9760MGR 1.16.010 or earlier version of software.
With this kit, the user can add new keyboards to an existing system (version
1.16.010 or earlier 9760MGR software) without having to upgrade to the latest
system and 9760MGR software.
Of course, the feature set available for the keyboard will correspond to that
associated with the 1.16.010 version of 9760MGR software.
The installation of this chip enables the following:
✓
The feature set of button key define functions is commensurate with
9760MGR version 1.16.010 or earlier software
✓
Eliminates problems arising out of conflicts between new 9760KBDs using
version 7.5 firmware with 9760MGR version 1.16.010 software
Follow the INSTALLATION instructions starting on page 2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION To change the U3 PROM chip on the KBD motherboard: 1. Log off of the keyboard and then unplug it (note which port you unplugged it from; if you plug the cable back into the wrong port after the procedure, yourscreen will be blank and you might draw the wrong conclusion as to the reason ...
3. Remove the existing U3 PROM chip (refer to Figure 2) from its socket using the provided extraction tool. Work the chip out slowly to avoid damaging thesocket. 4. Remove the replacement PROM from the electrostatic bag and inspect it to confirm that the pins are straight. 5. Orient the chip using t...
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material orworkmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic p...
