Pelco CM6700-VMC2-X - Manual
Pelco CM6700-VMC2-X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – exactly; The expansion card
- Page 3 – Exploded Assembly Diagram
- Page 4 – WARRANTY AND RETURN INFORMATION; WARRANTY
®
CM6700-VMC2
Expansion Card
Installation/Operation Manual
C524M (8/97)
1.0 WARNINGS
Prior to installation and use of this product, the following WARNINGS should be
observed.
1.
Installation and servicing should only be done by Qualified Service Personnel
and conform to all Local codes.
2.
Only use replacement parts recommended by Pelco.
3.
After replacement/repair of this unit’s electrical components, conduct a resis-
tance measurement between line and exposed parts to verify the exposed
parts have not been connected to line circuitry.
The product and/or manual may bear the following marks:
This symbol indicates static sensitive components. Use antistatic
grounding equipment whenever handling or servicing modules and
components. When circuit modules are removed from the frame, place
them on a flat static-controlled surface. Failure to follow this precau-
tion can result in component damage due to electrostatic discharge.
This symbol indicates that there are important operating and mainte-
nance instructions in the literature accompanying this unit.
Please thoroughly familiarize yourself with the information in this
manual prior to installation and operation.
Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Pelco Manual C524M (8/97) 2.0 DESCRIPTION The CM6700-VMC2 is a 2-monitor expansion card for the CM6700 Matrix System.This simple, plug-and-play installation expands the CM6700 video outputs fromtwo (2) to four (4) monitors. When the system is powered again after installation,the CM6700 will automa...
Pelco Manual C524M (8/97) 3 Figure 1. Exploded Assembly Diagram 1/4" HEX STAND OFFS (5) CONNECTOR PIN CONNECTOR PIN CONNECTORS (8) 6/32 SCREW (5) NYLON WASHER (5) CM6700 MOTHERBOARD 2-MONITOR EXPANSION BOARD
4 Pelco Manual C524M (8/97) 4.0 WARRANTY AND RETURN INFORMATION Pelco, the Pelco logo, Camclosure, Esprit,Genex, Legacy, and Spectra are registeredtrademarks of Pelco.Endura and ExSite are trademarks of Pelco. © Copyright 1997, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, witho...
