Pelco C641M (11/03) - Manual

Page 2 - CONTENTS; Section; LIST OF ILLUSTRATIONS; Figure

2 C641M (11/03) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS .................................................................................................................................................................. 3 WELCOME ..........................................................

Page 3 - RISK OF ELECTRIC SHOCK.; IMPORTANT SAFEGUARDS AND WARNINGS; Only use replacement parts recommended by Pelco.; W A R N I N G; before applying power

C641M (11/03) 3 C A U T I O N : RISK OF ELECTRIC SHOCK. DO NOT OPEN. IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should be done only by qualified service personnel and conform to all local c...

Page 4 - WELCOME; Qty; MODELS

4 C641M (11/03) WELCOME Thank you for purchasing Pelco’s DX7100 Series, high-quality digital video recorder (DVR). Your new system combines thefunctions of a recorder and multiplexer into a product with versatile recording and playback functions. The following equipment is supplied with the DX7100 S...

Page 5 - Rack Ear Installation; MOUNTING; FLAT SURFACE MOUNTING; To install the unit in an equipment rack:

C641M (11/03) 5 Figure 1. Rack Ear Installation IMPORTANT: Slots and openings in the cabinet provide ventilation and prevent it from overheating. Do not block these openings. Never place the DVR near or over a radiator or heat register. Do not place it in a built-in installation, such as a rack,unle...

Page 6 - BACK PANEL LAYOUT

6 C641M (11/03) BACK PANEL LAYOUT Figure 2. Back Panel Layout (DX7116 Model Shown) 1 Camera Inputs – 8 or 16 BNC camera inputs, depending on model 2 Alarm Inputs – 8 normally closed dry contact inputs 3 Analog Monitor Output – 1 BNC output (sequencing only) 4 Relay Outputs – 8 normally open dry cont...

Page 7 - BASIC INSTALLATION; Extended Installation; Basic Equipment Installation; before; Connect the keyboard to the bottom PS/2 input.; Maximum Distance

C641M (11/03) 7 BASIC INSTALLATION Basic installation covers all the equipment necessary to program and operate the system. Refer to the Extended Installation section for PTZ, alarm, sensors, and network connections. 115 230 OR DS P C olo r C CD C am era DSP Color CCD Camera 1 1 2 2 7 7 Verify that ...

Page 8 - Extended Equipment Installation; EXTENDED INSTALLATION; PTZ Installation

8 C641M (11/03) Power Analog (spot) Monitor Network 1 1 2 2 3 3 4 4 5 5 NOTE: A standard European plug is attached to the power adapter. To convert the adapter to the USA standard, loosen the Phillips head screw and remove the European plug. RX TX TX - + - RX RX TX TX + - + - RX RX TX TX + - + - PTZ...

Page 10 - SPECIFICATIONS; MECHANICAL

10 C641M (11/03) SPECIFICATIONS ELECTRICAL/VIDEO Input Voltage: 100-240 VAC switchable, 50/60 Hz Power: 210 watts Signal System: NTSC/PAL CPU and RAM DX7008: Celeron ® , 256 MB DX7016: Pentium ® III, 256 MB Resolution NTSC: 320 x 240 PAL: 384 x 288 Compression: M-JPEG Video Inputs: 8 or 16, dependin...

Page 11 - REVISION HISTORY; REGULATORY NOTICES; RADIO AND TELEVISION INTERFERENCE; Reorient or relocate the receiving antenna.; WARRANTY AND RETURN INFORMATION

C641M (11/03) 11 REVISION HISTORY Manual # Date Comments C641M 11/03 Original version. ® Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, Legacy, and Coaxitron are registered trademarks of Pelco.® Windows is a registered trademark of Microsoft Corporation. © Copyright 2003, Pelco. ® Pentiu...

Pelco C641M (11/03) - Manual

Table of Contents:

Summary

Other Pelco Models