Pelco C573M-D - Manual
Pelco C573M-D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – setup parameters for SAT programming from the 9760-KBD; CONNECT; THE CC1 TO THE; FIGURE 1
- Page 3 – outs on the SAT. Don’t skip around. Use Figure 3 as; FIGURE 2
- Page 4 – SETUP; PARAMETERS FOR SAT PROGRAMMING; FIGURE 4
- Page 5 – ALARM IMPLEMENTATION ISSUES; LOCAL ONLY; ARM the alarm in the LOCAL column*; SYSTEM ONLY; Do the following
- Page 6 – FIGURE 7
- Page 7 – COMBINED LOCAL AND SYSTEM; FIGURE 9
®
Pelco World Headquarters
• 3500 Pelco Way, Clovis, California 93612-5699 USA •
www.pelco.com
USA & Canada:
Tel: 800/289-9100 • Fax: 800/289-9150
International:
Tel: 1-559/292-1981 • Fax: 1-559/348-1120
A D D E N D U M
Addendum No.:
C1577M-A
Date:
August 4, 2004
Manuals Affected:
CM9760 Series Manuals –
C538M, C539M-A, C540M-B, C541M-C, C542M-B, C543M-A,
C544M, C549M-A, C572M, C573M-D, C578M, C579M, C1501M, C1503M, C1510M-QS,
C1510M-A, C1520M-B, C1528M-C, C1940M, C1941M, C1942M,
and
C1943M
Manual Update:
The CM9760-CC1 has been replaced with the CM9700-CC1 and the CM9760-MGR manage-
ment software has been replaced with the CM9700-MGR management software.
Keep the following in mind when referring to the instructions contained in these manuals:
•
The CM9700-CC1 contains the latest CC1 software (version 9.01 or higher), and is
programmed with the new CM9700-MGR management software.
•
Despite the difference in model numbers, the CM9700-CC1 functions the same as the
CM9760-CC1 and most of the information in these manuals applies to version 9.01 (or
higher) CPU.
•
You can add the CM9700-CC1 to an existing CM9760 system if you upgrade the existing
CM9760-CC1 units with the current software (version level 9.01 or higher).
Software version 9.01 requires a minimum of 16 MB of RAM in the CPU. If required, you
can upgrade the RAM in older CM9760-CC1 units using the software upgrade kit
appropriate for your CPU.
•
Do not use the CM9760-MGR instructions contained in these manuals. Refer to the
CM9700-MGR Getting Started Software Guide, on-screen help, or Online Help for
instructions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
C1510M-QS – CM9760-SAT Quick Start Reference Guide –1– CM9760-SAT QUICK STARTREFERENCE GUIDE FOR: the 9760-SAT physical interface setup parameters for SAT programming from the 9760-KBD alarm implementation issues ® CONNECT THE CC1 TO THE SAT (RS-422) Figure 1 shows a CM9760-SAT connected to a 9760 s...
C1510M-QS – CM9760-SAT Quick Start Reference Guide –2– THE CC1 TO THE SAT (TIE LINES) Tie lines (a minimum of one, a maximum of four) are connected in sequential, ascending order to monitor- outs on the SAT. Don’t skip around. Use Figure 3 as a guide. FIGURE 2 FIGURE 3
C1510M-QS – CM9760-SAT Quick Start Reference Guide –3– SETUP PARAMETERS FOR SAT PROGRAMMING In order to program and operate the SAT from the 9760-KBD, some preparatory groundwork must be laid by programming the following 9760 configuration files: the Comms, Camera and Link Camera files. Use Figures ...
