Pelco C538M-A - Manual
Pelco C538M-A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Guide
- Page 3 – CONTENTS; Section; LIST OF ILLUSTRATIONS; Figure
- Page 4 – SYSTEM UNPACKING AND RACKING; System 9760 Factory Default Port Settings
- Page 5 – Do not apply; SYSTEM DATA CONNECTIONS
- Page 6 – ADDITIONAL HOOKUP INFORMATION; Comms File; Configuring the System 9760 with the Pelco Window Set 9760 in the; SYSTEM VIDEO CONNECTIONS; DEFINITIONS; A technique to expand the matrix video inputs beyond 256.; VIDEO INPUTS
- Page 7 – SYSTEM PROGRAMMING; After
- Page 8 – The password is
- Page 9 – RENAMING CONFIGURATION FILES; Before the files are; SAVE; all
- Page 10 – SYSTEM PORT SETTINGS TABLE
- Page 11 – The number of ports on your system may differ from the; P O R T
- Page 12 – SETUP DRAWINGS; CM9760-MXB Typical Connections; TYPICAL CONNECTIONS
- Page 13 – CAMS
- Page 40 – NOTES
- Page 41 – WARRANTY AND RETURN INFORMATION; REVISION HISTORY
®
Pelco World Headquarters
• 3500 Pelco Way, Clovis, California 93612-5699 USA •
www.pelco.com
USA & Canada:
Tel: 800/289-9100 • Fax: 800/289-9150
International:
Tel: 1-559/292-1981 • Fax: 1-559/348-1120
A D D E N D U M
Addendum No.:
C1577M-A
Date:
August 4, 2004
Manuals Affected:
CM9760 Series Manuals –
C538M-A, C539M-A, C540M-B, C541M-C, C542M-B,
C543M-A, C544M, C549M-A, C572M, C573M-D, C578M, C579M, C1501M, C1503M,
C1510M-QS, C1510M-A, C1520M-B, C1528M-D, C1940M, C1941M, C1942M,
and
C1943M
Manual Update:
The CM9760-CC1 has been replaced with the CM9700-CC1 and the CM9760-MGR manage-
ment software has been replaced with the CM9700-MGR management software.
Keep the following in mind when referring to the instructions contained in these manuals:
•
The CM9700-CC1 contains the latest CC1 software (version 9.01 or higher), and is
programmed with the new CM9700-MGR management software.
•
Despite the difference in model numbers, the CM9700-CC1 functions the same as the
CM9760-CC1 and most of the information in these manuals applies to version 9.01 (or
higher) CPU.
•
You can add the CM9700-CC1 to an existing CM9760 system if you upgrade the existing
CM9760-CC1 units with the current software (version level 9.01 or higher).
Software version 9.01 requires a minimum of 16 MB of RAM in the CPU. If required, you
can upgrade the RAM in older CM9760-CC1 units using the software upgrade kit
appropriate for your CPU.
•
Do not use the CM9760-MGR instructions contained in these manuals. Refer to the
CM9700-MGR Getting Started Software Guide, on-screen help, or Online Help for
instructions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
System 9760 ® Installation Guide C1503M (11/99) Pelco • 300 W. Pontiac Way, Clovis • CA 93612-5699 USA • Pelco Online @ http://www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 • DataFAX (800) 289-9108 International Customers: Tel +1 (559) 292-1981 or FAX +1 (559) 3...
2 Pelco Manual C1503M (11/99) CONTENTS Section Page SYSTEM UNPACKING AND RACKING ............................................................................. 3SYSTEM DATA CONNECTIONS ....................................................................................... 4ADDITIONAL HOOKUP INFORMATI...
Pelco Manual C1503M (11/99) 3 This guide is intended to help you with the basic installation and setup of the Pelco System9760 ® Matrix Switcher and Controller. This guide is not a replacement for the system manual, but rather a tool to help you quickly get the system up and running. Before shipping...
