Page 2 - ii; REVISION HISTORY; Initial Issue, PRELIMINARY
ii Pelco Manual C501M-B (10/97) REVISION HISTORY Revision Level Date Description 1.0 7/93 Initial Issue, PRELIMINARY 1.1 9/93 Revised; Additional features added. All pages af-fected. PRELIMINARY 1.2 5/94 Revised; Additional features added. Major revisionsof sections 5 and 6. Minor revisions througho...
Page 3 - iii; TABLE OF CONTENTS; Intercept
Pelco Manual C501M-B (10/97) iii TABLE OF CONTENTS Section Page 1.0 WARNINGS .................................................................................................................................... 1-11.1 IMPORTANT SAFEGAURDS .................................................................
Page 4 - iv
iv Pelco Manual C501M-B (10/97) 4.3.3.1.6 Option Board Receiver Connections .................................... 4-9 4.3.3.2 Setting Termination on Video Inputs ..................................................... 4-10 4.3.3.3 Determining and Setting Monitor Output Assignments ........................
Page 7 - IMPORTANT SAFEGUARDS
Pelco Manual C501M-B (10/97) 1-1 1.0 WARNINGS 1.1 IMPORTANT SAFEGUARDS Before installing your equipment, please read the fol-lowing important safeguards as outlined by Underwrit-ers Laboratories Inc. Read InstructionsAll the safety and operating instructions should be readbefore the appliance is ope...
Page 8 - When the power-supply cord or plug is damaged.; REGULATORY NOTICES; This equipment has been tested and
1-2 Pelco Manual C501M-B (10/97) Damage Requiring ServicingUnplug this CCTV product from the wall outlet andrefer servicing to qualified service personnel under thefollowing conditions:a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have falleninto the CCT...
Page 9 - of pan/tilts and motorized lens functions.; System 8500 offers 32 PTZ control outputs. Any
Pelco Manual C501M-B (10/97) 2-1 Figure 1. CM8500 Configuration Diagram 2.0 GENERAL DESCRIPTION System 8500 is a microprocessor-based cross-pointvideo matrix switcher capable of handling up to 32 videoinputs to 16 monitor outputs (8 monitor outputs withCM8502A-1), from as many as 8 independent keybo...
Page 10 - 2 input by 1 output video matrix
2-2 Pelco Manual C501M-B (10/97) 2.1 MODELS AND ASSOCIATED EQUIPMENT 2.1.1 CPU/Card Cage/Power Supply CM8502A-1 Card Cage capable of 32 inputs andup to 8 monitor outputs. Each out-put requires a CM8504 I/O card.(CM8502A-1 is shipped with oneCM8504 I/O card). CM8502A-1-PAL CE-compliant version of CM8...
Page 18 - REAR VIEW, CM8505D KEYBOARD; REAR VIEW, CM8505R KEYBOARD
4-2 Pelco Manual C501M-B (10/97) Figure 2A. CM8503-1 Card Cage and CM8505 Keyboard Back Panel Connector Layout REAR VIEW CM8503A-1 CARD CAGE 4.3.2 Keyboard to CPU Hookup Up to eight (8) independent keyboards may be installed.The backplane of the main card cage has eight (8) portsthat correspond to t...
Page 19 - Top View
Pelco Manual C501M-B (10/97) 4-3 4.3.2.1 CM9505UPS/CM9505J Installation The CM8502A-1 and CM8503A-1 Card Cages eachoffer a total of eight (8) individual keyboard commu-nications ports. Normally one keyboard utilizes onecommunications port. Communications between eachkeyboard and the CPU consists of ...
Page 20 - NOTE; : When using the CM9505J with the
4-4 Pelco Manual C501M-B (10/97) Figure 5. CM9505UPS/CM9505J Configuration If the CPU is to supply power to the keyboards, thedistance limitations based on conductor size are shownin the following table: Wire ga. ft/m 14 832 / 254 16 416 / 127 18 275 / 84 20 166 / 51 22 104 / 32 24 64 / 20 28 26 / 8...
Page 22 - VIDEO INPUT/OUTPUT MATRIX CARDS
4-6 Pelco Manual C501M-B (10/97) LED will be illuminated. The Power On LED, whenon, indicates the unit On/Off switch is in the On posi-tion. The +5 VDC LED indicates the power supply isoperating. Pressing the Reset button while the unit is operating will cause the system to initialize and restart op...
Page 23 - Individual Circuit Cards; Motherboard PCB
Pelco Manual C501M-B (10/97) 4-7 4.3.3.1 Removal/ Replacement of Individual Circuit Cards 4.3.3.1.1 Motherboard Access The CM8500 card cage has been designed with user-convenience and operational integrity foremost in mind.The slide-out motherboard makes dependable electri-cal contact while providin...
Page 24 - : To reduce the risk of personal; the CPU Card
4-8 Pelco Manual C501M-B (10/97) Figure 8. CPU Card Component Location WARNING : To reduce the risk of personal injury due to electrical shock and also to pre-vent possible damage to the electronic circuitry,always remove power to the unit prior to re-moving or installing any printed circuit boards....
Page 26 - : Jumper positions 1 and 2 apply to the; Monitor Output Assignments; Since the CM8500 is a Coaxitron; JUMPER SETTINGS
4-10 Pelco Manual C501M-B (10/97) Figure 9. Buffer Card and Jumper Locations 4.3.3.2 Setting Termination on Video Inputs The termination settings for the 32 video inputs are in-dividually assigned on the Buffer Card. There are 64jumpers located on the component side of the board,two jumpers for each...
Page 28 - Figure 10. Data Monitor Hookup; TYPICAL CONTROL LOCATION
4-12 Pelco Manual C501M-B (10/97) Figure 10. Data Monitor Hookup KEYBOARD 1 MON 1 DATA MONITOR MON 2 2 TW PR & 3 CONDUCTOR MONITOR 1 VIDEO OUTPUT MONITOR 2 VIDEO OUTPUT RX/DR PT&Z VIDEO COAX COAX KEYBOARD 1 DATA/PWR LINE RELAYS OUT 1-16 FUSE 3AG (5X20) 250V 2A RELAYS OUT 17-32 ALARMS IN 1-16...
Page 29 - Alarm/Relay Interface Board
Pelco Manual C501M-B (10/97) 4-13 4.3.6 Installation/Connection of CM8532 Alarm/Relay Interface 4.3.6.1 Alarm/Relay Interface Kit Installation The Alarm/Relay Interface Kit contains the Alarm/Relay Interface Board (with ribbon cables attached)and all hardware needed to secure the board and con-necto...
Page 30 - “D” Connectors; Facing back of card cage.
4-14 Pelco Manual C501M-B (10/97) 4.3.7.1 Alarm Inter face 37-Pin Sub “D” Connectors The pin-out number assignments and configurationsshown below match the 37-pin ribbon cables used inthe alarm/relay interface. Alarm No: Pin No: 17 In 1 17 Com 20 18 In 2 18 Com 21 19 In 3 19 Com 22 20 In 4 20 Com 23...
Page 31 - Assignments; Please note that the pin; Ground
Pelco Manual C501M-B (10/97) 4-15 4.3.8 Relay Output Connection 4.3.8.1 Relay Inter face Connector Pin Assignments The pin-out number assignments and configurationsshown below match the 50-pin ribbon cables used inthe alarm/relay interface. IMPORTANT: Please note that the pin assignments on the 50-p...
Page 32 - Connector
4-16 Pelco Manual C501M-B (10/97) Output No: Connector No: Pin No: 1+ 2-Wire Control 1-16 1 1- 2-Wire Control 1-16 2 2+ 2-Wire Control 1-16 3 2- 2-Wire Control 1-16 4 3+ 2-Wire Control 1-16 5 3- 2-Wire Control 1-16 6 4+ 2-Wire Control 1-16 7 4- 2-Wire Control 1-16 8 5+ 2-Wire Control 1-16 9 5- 2-Wir...
Page 34 - Figure 12. Numeric Keypad; CLEAR
5-2 Pelco Manual C501M-B (10/97) Figure 12. Numeric Keypad 1 2 5 4 3 6 7 8 0 CLEAR 9 ENTER 5.1.3 Numeric Keypad The numeric keypad serves as the primary input de-vice for numeric entries. Numeric entries include pro-gramming functions, call up of cameras, monitors,presets, sequence programs, etc. In...
Page 36 - : There must be a space between the; Figure 15. Log On Screen with On-Screen Keyboard; Requirements; Using the joystick and the
5-4 Pelco Manual C501M-B (10/97) NOTE : There must be a space between the user field [1] and the user ID [99999] . The data monitor will now display monitor and cameraat the bottom of the screen. The system is now be ready for initial programmingand/or operation. Figure 15. Log On Screen with On-Scr...
Page 38 - button on the joystick.; Clock; S y s t e m
5-6 Pelco Manual C501M-B (10/97) 5.4.1.1 System Menu Highlighting this selection and pressing [point] enablesthe System menu if the operator is authorized based onhis/her user profile. To select any of the choices, dragthe cursor to the desired selection (highlight) and re-lease the [point] button o...
Page 39 - C a m
Pelco Manual C501M-B (10/97) 5-7 5.4.1.2 Cam Menu Highlighting Cam and pressing [point] will bring up the camera menu. Refer to Figure 18. To select anyof the choices from this menu, drag the cursor to high-light the selection and release the [point] button. Selecting Label allows the user to progra...
Page 40 - U s e r; Figure 19. Keyboard Menu; Ke y b r d
5-8 Pelco Manual C501M-B (10/97) 5.4.1.3 Keybrd Menu Highlighting Keybrd and pressing the [point] but- ton will access the pull-down menu. Refer to Figure19. Selecting Monlocks allows the user to create a table defining which monitors may be accessed by specifickeyboards. Refer to Section 5.5.1.3 an...
Page 41 - A l r m R e l; Figure 21. Sequence Menu
Pelco Manual C501M-B (10/97) 5-9 5.4.1.5 Seq Menu Highlight Seq and press [point] to access the pull- down menu. Refer to Figure 21. Selecting Edit allows the user to program camera se- quences including camera selection, dwell time andpreset positions. There are 16 sequences available forprogrammin...
Page 42 - E v e n t
5-10 Pelco Manual C501M-B (10/97) 5.4.1.7 Tour Menu Highlighting Tour in the menu bar and pressing the [point] button accesses the pulldown menu. Refer to Figure 23. Selecting Edit allows the user to program various lev- els of Tour information. The CM8500 offers a total of eight (8) individual tour...
Page 43 - S y s t e m C a m Ke y b r d U s e r S e q A l r m R e l To u r E ve n t
Pelco Manual C501M-B (10/97) 5-11 5.4.1.9 Logoff Menu Highlighting Logoff and pressing the [point] but- ton accesses the pulldown menu. Refer to Figure 25. Selecting Logoff by highlighting and pressing the [point] button will log the user off the system. To regain access to the system, the user must...
Page 52 - LOCATION
5-20 Pelco Manual C501M-B (10/97) 5.5.1.6 Zone Assignment Form The Zone Assignment Form is used to provide a logand brief description of each zone programmed by theCM8500 system. The Zone option can be accessed onlywhen Spectra™ and Intercept ® series receivers are be- ing utilized. Each Spectra™ an...
Page 55 - The alarm monitor should never be; PRESET
Pelco Manual C501M-B (10/97) 5-23 5.5.1.8 Alarm Assignment Form The Alarm Assignment Form is used to define whichcameras and which monitors will be accessed when aspecific alarm is received by the CM8500 System. Thereare 32 alarms available for programming. Each alarmcan be defined to appear on any ...
Page 56 - Figure 26. Clock Programming Screen
5-24 Pelco Manual C501M-B (10/97) 5.5.2 Programming Instructions 5.5.2.1 System Initialization When the CM8500 is first initialized a “Logon Prompt”will appear at the bottom of the screen. Press the [ENTER] key to access the Logon screen. As shipped, the CM8500 is programmed to accept any2-digit use...
Page 58 - Figure 28. Receiver Types Programming Screen
5-26 Pelco Manual C501M-B (10/97) 5.5.2.4 Programming Receiver Types Defining the type receiver located at each camera loca-tion is important to the proper operation of the CM8500system because the system refers to this table duringother portions of the programming process and also inthe “run” mode....
Page 63 - OK; Figure 30. User Profiles Programming Screen
Pelco Manual C501M-B (10/97) 5-31 USER PROFILES USER ID PRI GRD SPR MGR 1 2 3 4 5 6 7 99999 99999 99999 99999 99999 99999 99999 99999 1 1 2 2 2 2 2 58 * * * * * * * 8 * Mon: -- Cam: --- CAMERA ACCESS LOK VID POS 1 2 3 4 5 6 7 * * * * * * * DESCRIPTION * 8 LOBBY MAIN PARKING MAIN ENTRANCE REAR ENTRAN...
Page 65 - Figure 33. Sequence Programming Screen; Figure 32. Sequence Description Screen
Pelco Manual C501M-B (10/97) 5-33 Figure 33. Sequence Programming Screen 09:10:12 Mon: -- Cam: --- CAMERA 1 LOBBY 2 MAIN PARKING 3 MAIN ENTRANCE 4 REAR ENTRANCE 5 LOADING DOCK 6 S E CORNER 7 S W CORNER 3 MAIN ENTRANCE 8 N E CORNER SEQUENCE ALL ENTRANCES DWL PRE Figure 32. Sequence Description Screen...
Page 66 - Figure 34. Alarm Description Screen
5-34 Pelco Manual C501M-B (10/97) Mon: -- Cam: --- 1 2 3 4 5 6 7 8 ALARM ONE, FRONT ALARMS DESCRIPTION DWL EN ALARM TWO 3 1 * * Figure 34. Alarm Description Screen 5.5.2.11 Programming Alarms The CM8500 System is capable of accepting up to 32alarm inputs. Each alarm can appear on any or all ofthe 16...
Page 67 - Figure 35. Monitor and Camera Definition Screen
Pelco Manual C501M-B (10/97) 5-35 09:10:12 Mon: 1 Cam: 1 CAMERA 1 LOBBY 2 MAIN PARKING 3 MAIN ENTRANCE 5 LOADING DOCK 6 S E CORNER 7 S W CORNER 8 N E CORNER 07/O9/93 M1 C1 ALM 3 MON CAMERA PRE 1 2 3 4 5 6 7 8 2 4 REAR ENTRANCE 4 REAR ENTRANCE OK Figure 35. Monitor and Camera Definition Screen 4. If ...
Page 68 - Figure 37. Relay Follow Assignments Menu; Relay Follow; Camera; Use scroll bars to access all 32 camera/relay; Figure 36. Relay Follow Menu; Use this menu to select the monitor camera/
5-36 Pelco Manual C501M-B (10/97) 5.5.2.12 Programming Relay Follow The System 8500 is capable of providing relay closuresthrough the use of the CM8532 Relay output card. Theserelays can be energized manually or automaticallythrough alarm programing. The CM8532 relay follow card provides 32 double-p...
Page 69 - Tour; Title of Tour 1; Figure 39. Tour “Pick” List Menu; Relay; Relay Control; button on the System
Pelco Manual C501M-B (10/97) 5-37 5.5.2.13 Relay Manual Control The System 8500 Keyboard allows the user to monitorthe status of the monitor camera/relay assignments, aswell as “Enable” or “Disable” relays without enteringinto the programming section of the system. 1. By pressing the [RELAY] button ...
Page 70 - Figure 40. Tour Menu and Camera “Pick” List; Figure 41. Tour Control Menu
5-38 Pelco Manual C501M-B (10/97) Figure 40. Tour Menu and Camera “Pick” List 3. Within the left-hand column of the Tour menu, select a monitor number to be programmed. Afterhighlighting the camera title space for the moni-tor, select the camera for that monitor from thecamera “pick” list menu (loca...
Page 71 - Figure 42. Event Editor Menu; Event Editor
Pelco Manual C501M-B (10/97) 5-39 5.5.2.15 Programming Event Schedules The System 8500 sequencing program allows the userto tie event programming (tours running by day typesand times) to specific, current-year, calendar-baseddates. Each day of the year can be defined as one of six user-programmable ...
Page 72 - Figure 43. Event Editor and Tour “Pick” List Menus; Press; ENTER; on the keypad to enter into the Sys-; Schedule; Figure 44. Event Editor Menu; Schedule Editor; Figure 45. Schedule Editor Menu
5-40 Pelco Manual C501M-B (10/97) Figure 43. Event Editor and Tour “Pick” List Menus 5.5.2.17 Programming Schedules After Tours have been programmed and sequenced intoDayTypes, each DayType can be sequenced across acalendar as a complete schedule of day-to-day events.To schedule DayTypes across spec...
Page 73 - Figure 46. Data Monitor
Pelco Manual C501M-B (10/97) 6-1 6.0 SYSTEM OPERATION, KEYBOARD COMMANDS If you are not yet familiar with the operation of theCM8500 system, you are encouraged to take a fewminutes to review Section 6.1, System Operation/Keyboard Commands. This section outlines the stepsnecessary for proper operatio...
Page 74 - Figure 47. Monitor Selection Menu; key located; key without first entering a numeric input.; : When using the Monitor Selection
Page 6-2 Pelco Manual C501M-B (10/97) Figure 47. Monitor Selection Menu MAIN ENTRANCE Mon: 1 Cam: 3 07/O9/93 09:10:12 M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 6.1.2 Log On To Log On to the system requires that a Log On promptbe visible in the Status Bar located at the bottom ofthe Data...
Page 75 - Figure 48. Camera Selection Menu
Pelco Manual C501M-B (10/97) 6-3 09:10:12 Mon: 1 Cam: 1 CAMERA 1 LOBBY 2 MAIN PARKING 3 MAIN ENTRANCE 4 REAR ENTRANCE 5 LOADING DOCK 6 S E CORNER 7 S W CORNER 8 N E CORNER 3 MAIN ENTRANCE LOBBY 07/O9/93 M1 C1 Figure 48. Camera Selection Menu 6.1.4 Calling Up a Camera There are three ways to call up ...
Page 77 - Focus Speed; Call up the camera to be edited.; Figure 49. Sequence Menu; key. The sequence will
Pelco Manual C501M-B (10/97) 6-5 6.1.5.6 Adjusting Lens Zoom and Focus Speed The CM8500 System offers a simple way of adjustingcamera lens Zoom and Focus speeds for better address-ing user needs. To adjust the Zoom or Focus speed of acamera lens, proceed with the following: 1. Call up the camera to ...
Page 80 - Logoff
Page 6-8 Pelco Manual C501M-B (10/97) Auto Scan - To select auto scan when the receiver/driveris in manual scan or random scan: 1. Select the camera (refer to Section 6.1.4 if neces-sary). 2. Press the [ENTER] key on the keyboard to ac- cess the On-Screen Function Buttons. 3. Use the joystick to pos...
Page 81 - OPERATION QUICK REFERENCE GUIDE; Available only on Intercept
Pelco Manual C501M-B (10/97) 6-9 6.2 OPERATION QUICK REFERENCE GUIDE The following quick reference guide is intended for those familiar with the operation of the CM8500 System. For thoseusing the system for the first time, it is highly recommended that you review Section 6.1 prior to operating the s...
Page 83 - SCHEMATICS AND DRAWINGS
Pelco Manual C501M-B (10/97) 7-1 ITEM QTY DESCRIPTION PART NUMBER 1 1 Chassis 96004202COMP 2 2 Support, PCB, Short 96004005COMP 3 1 Vertical Support, Right 96004006COMP 4 1 Vertical Support, Left 96004007COMP 5 1 Support, PCB, Long 96004008COMP 6 2 Bracket Ejector 96004010COMP 7 6 Ejector 96004011CO...
Page 84 - Figure 50. CM8500 Series Card Cage Exploded View Diagram
7-2 Pelco Manual C501M-B (10/97) Figure 50. CM8500 Series Card Cage Exploded View Diagram
Page 85 - Power Supply Voltages; GND
Pelco Manual C501M-B (10/97) 8-1 8.0 TROUBLESHOOTING 8.1 INITIALIZATION Symptom: CPU will not power up 1. Check On/Off switch. Also check to see if thePower On and +5 VDC LEDs are illuminated. (SeeFigure 7.) 2. Check power cord connection. 3. Check fuse located below the On/Off switch. 4. Using an o...
Page 86 - OPERATIONAL PROBLEMS; Check to see that the Coaxitron
8-2 Pelco Manual C501M-B (10/97) 8.2 OPERATIONAL PROBLEMS Symptom: Video is tearing, hum bars, distortion, noisein video 1. These are all symptoms of a possible ground loopor electrical grounding problem between one ormore camera locations and the CPU. Although theproblem may be restricted to only o...
Page 90 - Series Only
9-4 Pelco Manual C501M-B (10/97) 1 2 4 14 20 21 16 32 31 30 29 28 27 26 25 24 23 22 19 18 17 15 13 12 11 10 9 8 7 3 5 6 PRESET DESCRIPTION LABEL* COMMENTS CAMERA (INPUT) NUMBER LOCATION RECEIVER TYPE CAMERA/LENS CONFIGURATION PRESET ASSIGNMENT FORM * Intercept ® Series Only
Page 96 - Pelco
® Pelco 300 W. Pontiac Way Clovis, CA 93612-5699 • USA Pelco Online @ http://www.pelco.com In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108 International Customers: Tel (1-209) 292-1981 or FAX (1-209) 348-1120 • DataFAX (1-209) 292-0435 (Design and produc...
