Pelco C361M-A - Manual
Pelco C361M-A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFEGUARDS AND WARNINGS; Only use replacement parts recommended by Pelco.; DESCRIPTION; MODELS; INSTALLATION; A terminal box or
- Page 3 – PREPARE MOUNTING SURFACE; Figure 1. PS20 Surface Mount Template
- Page 4 – WIRING; Table A. Maximum Operating Distances; Model; Attachment
- Page 5 – Remove the speed setting cover.; Figure 4. Scanner Adjustments and Settings
- Page 6 – LIMIT STOP ADJUSTMENT; To set pan limit stops, perform the following steps:
- Page 7 – SPECIFICATIONS; MECHANICAL
- Page 8 – REVISION HISTORY; WARRANTY AND RETURN INFORMATION; REGULATORY NOTICES; Reorient or relocate the receiving antenna.
PS20 Medium-Duty
Indoor/Outdoor Scanner
Installation/
Operation Manual
C361M-A (8/02)
®
Pelco World Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.pelco.com
USA & Canada: Tel: 800/289-9100 • Fax: 800/289-9150
International: Tel: 1-559/292-1981 • Fax: 1-559/348-1120
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Pelco Manual C361M-A (8/02) IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel andconform to all local codes. 2. Installation shall be done in a...
Pelco Manual C361M-A (8/02) 3 PREPARE MOUNTING SURFACE 1. Determine the mounting location. Make sure the mounting surface can support fourtimes the combined weight of the scanner and the camera and lens or enclosure,camera, and lens. Refer to the manuals for your enclosure, camera, and lens for thew...
4 Pelco Manual C361M-A (8/02) WIRING Make electrical connections as required for scanneroperation. If required use the wire nuts (provided).Cable distances should not exceed the distancesspecified in Table A. Refer to the following wiring diagrams (Figure 3)and select the correct diagram for your in...
