Page 4 - Important Safety Instructions
4 C2943M-B (1/09) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the ma...
Page 5 - Regulatory Notices; RADIO AND TELEVISION INTERFERENCE
C2943M-B (1/09) 5 Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesire...
Page 6 - Description; MODELS; PACKAGE CONTENTS; QTY
6 C2943M-B (1/09) Description Public view monitors (PVM) are units that contain a built-in camera that is pointed in the direction the monitor faces. This allows customers to see themselves on the monitor. This feature makes the PVM ideal for commercial establishments because it creates interest, wh...
Page 7 - Installation; MOUNTING; WIRING; Total VA
C2943M-B (1/09) 7 Installation MOUNTING The PVM accommodates mounts that adhere to the VESA ® 100 x 100 standard. For mounting from a ceiling, Pelco recommends using the PMCL-CM mount. This mount can be swiveled 360 degrees, and lets you tilt the monitor 35 degrees for the best viewing angle. This m...
Page 8 - REAR PANEL CONNECTORS
8 C2943M-B (1/09) REAR PANEL CONNECTORS Figure 2. Rear Panel Connectors ì 24 V AC~: The 24 volt AC power. NOTE: The center post is not to be used. î Camera Out: The internal camera’s video output signal. ï Video 2 (loop through): The input connections from a camera or a DVD player. Video loops throu...
Page 9 - Operation; FRONT AND SIDE PANEL CONTROLS; and
C2943M-B (1/09) 9 Operation FRONT AND SIDE PANEL CONTROLS Figure 3. Front and Side Panel Controls ì (Power): Turns on/off the monitor. î ! / VOL + and " / VOL- : Increases or decreases the volume. Also selects or adjusts items on the on-screen menu. ï # and $ : Navigates through the on-screen me...
Page 10 - INSTALLING REMOTE CONTROL BATTERIES
10 C2943M-B (1/09) INSTALLING REMOTE CONTROL BATTERIES Figure 4. Battery Installation 1. Open and remove the back cover of the remote control. 2. Install two AAA size batteries (supplied). Match the plus (+) and minus (-) symbols on the batteries to the symbols on the battery compartment. 3. Close t...
Page 11 - REMOTE CONTROL FUNCTIONS
C2943M-B (1/09) 11 REMOTE CONTROL FUNCTIONS MEDIA MENU ENTER PLAY/PAU S E S TOP/RTN ENTER MUTE VIDEO1 POWER VIDEO 2 MEDIA C AMERA PIP ON/OFF P. S IZE P. S W AP P. INPUT P . LO C ATION C Y C LE MENU/EXIT KEY LO C K SC AN S TILL C OLOR TEMP /VOL /VOL + ì POWER: Turns on/off power to the monitor. î MUT...
Page 12 - OSD FUNCTION; INPUT SOURCE DISPLAY; MAIN MENU; NT; SC; Maintenan
12 C2943M-B (1/09) OSD FUNCTION INPUT SOURCE DISPLAY Figure 6. Input Source Display Screen The input source is displayed in the upper-right corner, where it can be changed. It can be changed using the Source button on the monitor or using the buttons on the remote control (when the OSD Mode Label is...
Page 13 - MENU DISPLAY
C2943M-B (1/09) 13 MENU DISPLAY Figure 8. Menu Tree PI C TURE SC REEN S ETUP PVM S ETUP C Y C LE S ETUP C AMERA MAINTENAN C E Default values a r e in bold MAIN MENU 0 50 100 0 50 100 0 50 100 0 50 100 0 50 100 5 10 30 5 10 30 5 10 30 5 10 30 1 OFF 8 0 9 15 B r ightness Menu C ont r ast Menu S ha r p...
Page 14 - MENU FIELD DEFINITIONS; PICTURE; SCREEN; SETUP
14 C2943M-B (1/09) MENU FIELD DEFINITIONS PICTURE Brightness: Adjusts the white level of the video screen image (0 to 100). Contrast: Adjusts the black level of the video screen image (0 to 100). Sharpness: Adjusts the picture softer or sharper (0 to 15). Color: Adjusts the color saturation of the v...
Page 15 - MAINTENANCE
C2943M-B (1/09) 15 PVM SETUP Auto Power ON: Select the video input to be activated when power is restored after an electrical failure. Select OFF, VIDEO 1, VIDEO 2, CAMERA, or MEDIA. Light Sensor Mode: Automatically turns on or off the monitor based on the light intensity. L. Sensor Sensitivity: Set...
Page 16 - MEDIA CONTROL; Photo Slide Show
16 C2943M-B (1/09) MEDIA CONTROL Media Type Selection Screen Figure 9. Media Type Selection Screen The four choices available on the Media Type Selection screen are PHOTO (slides), MUSIC, MOVIE, and FILES. Photo Slide Show Select the photo slide show: 1. Press the MEDIA MENU button on the remote con...
Page 17 - Slide Show Menu
C2943M-B (1/09) 17 Figure 11. Slide Show Screen 3. Select the desired picture using the left and right arrow buttons ( " and ! ). Press PLAY (or ENTER) to play the slide show. If a picture is deselected, it will have a red highlight. To include a picture, it must have a green highlight. (Pressin...
Page 19 - Type
C2943M-B (1/09) 19 Movie Mode Select a movie: 1. Press the MEDIA MENU button on the remote control to access the media options. 2. Use the left and right arrow buttons ( " and ! ) on the media portion of the remote control (refer to Figure 10 on page 16) to highlight the MOVIE option, and then p...
Page 20 - REPLACING THE CAMERA; CAMERA REMOVAL; DIP SWITCH SETTINGS
20 C2943M-B (1/09) REPLACING THE CAMERA NOTE: You must wear lead-free gloves and use electrostatic discharge (ESD) equipment when handling cameras. CAMERA REMOVAL 1. Place the monitor face down, being careful not to scratch or touch the screen. 2. Use the thumb screw on the bottom of the monitor to ...
Page 22 - CAMERA INSTALLATION AND CAMERA ADJUSTMENT
22 C2943M-B (1/09) CAMERA INSTALLATION AND CAMERA ADJUSTMENT 1. Plug the two camera connection leads from inside the monitor into the connectors on the camera. These connectors are keyed and only fit in the correct receptacles, so confusing the connectors is not possible. 2. Attach the camera using ...
Page 23 - Specifications
C2943M-B (1/09) 23 Specifications MODELS PMP20B 20-inch (510 mm) LCD black monitor with WDR camera PMP20W 20-inch (510 mm) LCD white monitor with WDR camera PMP26B 26-inch (660 mm) LCD black monitor with WDR camera PMP26W 26-inch (660 mm) LCD white monitor with WDR camera GENERAL Native Resolution P...
Page 24 - ELECTRICAL; ENVIRONMENTAL
24 C2943M-B (1/09) ELECTRICAL Input Voltage 24 VAC (50/60 Hz) Power Consumption PMP20B, PMP20W 96 W (4.0 A) PMP26B, PMP26W 160 W (6.7 A) Input Interfaces Video: 2 BNCMedia card (refer to General on page 23) Output interfaces 1 BNC Camera Horizontal Frequency 15.75/16.25 kHz Vertical Frequency 50/60 ...
Page 25 - CERTIFICATIONS
C2943M-B (1/09) 25 LENS SPECIFICATIONS Focal Length 3.0 mm to 9.5 mm Format Size 1/3-inch F-Number f/1.0~1.8 Operation Iris Auto Focus Manual Zoom Manual Angle of View* Horizontal 100.4 ° to 31.6 ° Diagonal 131.6 ° to 39.6 ° Vertical 72.8 ° to 23.8 ° *Focal length specifications presume a 10% horizo...
Page 27 - PRODUCT WARRANTY AND RETURN INFORMATION
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC. This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disp...
