Pelco C2931M97/05) - Manual
Pelco C2931M97/05) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA •
USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150
International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120
Pelco and the Pelco logo are registered trademarks of Pelco.
©Copyright 2005, Pelco. All rights reserved.
DLP is a registered trademark of Texas Instruments, Inc.
C2931M (7/05)
PMCD750 DLP
™
Display
Removable On-Screen Code Chart
The PMCD750 will flash a sequence of red and amber lights on the screen to indicate current status or if a fault exists. Cut out these cards for convenient
referencing of the on-screen codes.
Condition
Priority
Each block represents 0.2 seconds
Starts with red;
lamp is off
Door open
1
R
R
R
See footnote 1
Power supply fan failed
2
R
Amber
DLP fan failed
3
R
Amber
R
350V failed
4
R
R
Amber
Optical engine failed
5
R
R
Amber
R
Lamp failed
6
R
R
R
R
Lamp off (wait, auto off)
2
7
R
R
Amber
Amber
Wait (lamp off, cooling)
8
R
R
R
R
Starts with
amber
Lamp off (lamp saver)
3
9
Amber
Amber
R
Lamp off (ready to turn on)
10
Amber
Amber
Lamp striking (starting)
11
Amber
Amber
Amber
Lamp on, no alarms
12
Amber on continuously
R
= Red
To show the code, press
MONITOR
button once.
1
With Priority 1-6, to turn lamp on, cycle off, and then on. If Auto Codes in the Miscellaneous menu is checked, events with Priority 1-5 start the
on-screen code automatically.
2
Lamp Saver turned lamp off; lamp is cooling and will turn on at end of cooling period.
3
A Lamp On command from the remote or from RS-232 commands will turn lamp on.
Condition
Priority
Each block represents 0.2 seconds
Starts with red;
lamp is off
Door open
1
R
R
R
See footnote 1
Power supply fan failed
2
R
Amber
DLP fan failed
3
R
Amber
R
350V failed
4
R
R
Amber
Optical engine failed
5
R
R
Amber
R
Lamp failed
6
R
R
R
R
Lamp off (wait, auto off)
2
7
R
R
Amber
Amber
Wait (lamp off, cooling)
8
R
R
R
R
Starts with
amber
Lamp off (lamp saver)
3
9
Amber
Amber
R
Lamp off (ready to turn on)
10
Amber
Amber
Lamp striking (starting)
11
Amber
Amber
Amber
Lamp on, no alarms
12
Amber on continuously
R
= Red
To show the code, press
MONITOR
button once.
1
With Priority 1-6, to turn lamp on, cycle off, and then on. If Auto Codes in the Miscellaneous menu is checked, events with Priority 1-5 start the
on-screen code automatically.
2
Lamp Saver turned lamp off; lamp is cooling and will turn on at end of cooling period.
3
A Lamp On command from the remote or from RS-232 commands will turn lamp on.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
