Pelco C2493M - Manual
Pelco C2493M – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important Safety Instructions; where exposed to rain and moisture.
- Page 3 – Installation; Input power for the dome is 24 VAC only. Power consumption
- Page 5 – Information Required; Endura
- Page 6 – Specifications; SYSTEM; ENVIRONMENTAL PENDANT
- Page 7 – PRODUCT WARRANTY AND RETURN INFORMATION
Spectra III
™
EVS
Pendant Back Box
I N S T A L L A T I O N
C2493M (12/05)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 C2493M (12/05) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the man...
C2493M (12/05) 3 Installation . 1 Install the mount for the pendant dome. Refer to the instructions supplied with the mount. 2 Open the hinged door to the back box. Push the tab lock towards the wall of the unit and lift the door open. Pull power, alarm/auxiliary, and network cable into the back box...
C2493M (12/05) 5 7 No DIP switch settings are required for the system. Before installing the dome drive verify that switch SW1-1 (SW1, switch 1) is set to the ON position and all other switches are set to the OFF position. The switches set the dome drive for Pelco’s D protocol, address 1, 2400 baud,...
