Pelco C2234M - Manual
Pelco C2234M – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MODELS
- Page 3 – Installation; the mounting surface
- Page 5 – Connect the BNC connector from the unit to a mating BNC connector.; Voltage; Ground
- Page 6 – Specifications; MECHANICAL
- Page 7 – PRODUCT WARRANTY AND RETURN INFORMATION; REVISION HISTORY
I N S T A L L A T I O N
IS90-PW Wall Mount
Indoor Only
C2234M (2/07)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 C2234M (2/07) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Only use attachments/accessories specified by the manufacturer. 6. Installation should be done only by qualified personnel and conform to all loc...
C2234M (2/07) 3 Installation To install the IS90-PW/IS90B-PW pendant wall mount, complete the following steps: 1. Run 24 VAC power, video (coaxial or UTP), and camera control wiring to the mounting location. If you are using coaxial video, do not attach a BNC connector to the cable until step 5. 2. ...
C2234M (2/07) 5 5. Connect the video cable/wires to the IS90 back box: BNC: Connect the BNC connector from the unit to a mating BNC connector. Twisted Pair (UTP): Blue wire = Video +Gray wire = Video – 6. Connect the power wires. 7. Use the provided mounting screws and attach the back box to the mou...
