Pelco C2219M - Manual
Pelco C2219M – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Recommended Mounting Surface; Hollow cinder block
- Page 3 – Attaching the Wall Bracket and Monitor
- Page 4 – PRODUCT WARRANTY AND RETURN INFORMATION; WARRANTY; REVISION HISTORY; Date; Worldwide Headquarters
C2219M (11/05)
PMCL-WM Monitor Mount
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings
4. Follow all instructions.
5. Only use attachments/accessories specified by the manufacturer.
6. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
7. Installation should be done only by qualified personnel and conform to all local codes.
8. Use only installation methods and materials capable of supporting four times the maximum specified load.
9. Only use replacement parts recommended by Pelco.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important operating and maintenance instructions in the lit-
erature accompanying this unit.
Description
The PMCL-WM monitor mount is designed for attaching PMCL Series flat panel, TFT LCD monitors to a wall.
Installation
The following parts are supplied:
QTY DESCRIPTION
1
Monitor bracket
1
Wall bracket
1
10-32 socket head screw
4
M4 x 10 mm screws
4
Split lock washers
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
To install the wall mount: 1. Attach the monitor bracket to the monitor as shown in Figure 1. Use the M4 x 10 mm screws and split lock washers. 2. Attach the wall bracket to the wall with the short side pointing down. Hardware is not supplied. Use hardware capable of supporting 68 pounds (30.8 kg). ...
3. Carefully slide the monitor bracket into the slots of the wall bracket. Refer to Figure 2. 4. Use the 10-32 socket head screw to fasten the wall bracket to the monitor bracket. Refer to Figure 2. Figure 2. Attaching the Wall Bracket and Monitor SCREW, 10-32 X 0.750-INCH SOCKET HEAD
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material orworkmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic ...
