Pelco C1969M-A - Manual
Pelco C1969M-A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFEGUARDS AND WARNINGS; Only use replacement parts recommended by Pelco.; late Federal wiretapping laws; Do not attempt to disassemble the unit.
- Page 3 – DESCRIPTION; OVERVIEW; INSTALLATION; INSTALLATION TIPS; • Do not directly staple the cable to any surface.; UNPACKING; Camera Kit; Camera
- Page 4 – INSTALLING THE CAMERA; Assemble and mount the camera and bracket.; Figure 1. Connections at the Back of the Monitor; Connect cable to camera. Insert plug with the arrow facing up.
- Page 5 – CHECKOUT; Table A. Checkout Procedure When Adding a Camera to the System; STEP; Checkout is complete.
- Page 6 – TECHNICAL SPECIFICATIONS; ELECTRICAL; watts; GENERAL; Humidity; THE FOLLOWING PAGE MAY BE COPIED.
- Page 8 – REVISION HISTORY; Date; REGULATORY NOTICES; PRODUCT WARRANTY AND RETURN INFORMATION
CCQ1400A-4
Color CCD Camera
with 4 mm Lens
Installation/
Operation Manual
C1969M-A (1/02)
®
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150
International Customers: Tel +1 (559) 292-1981 or FAX +1 (559) 348-1120
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Pelco Manual C1969M-A (1/02) IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. Unless the unit is specifical...
Pelco Manual C1969M-A (1/02) 3 DESCRIPTION OVERVIEW The CCQ1400A-4 color CCD camera with 4 mm lens is designed for use with the PMCQ14A 14-inch color quad monitor. A mini-DIN 6 connector in the back of the camera matches the connector on the back of the monitor. Power, alarm, audio and videocontacts...
4 Pelco Manual C1969M-A (1/02) INSTALLING THE CAMERA 1. Assemble and mount the camera and bracket. NOTE: The screws provided are intended for wood. If it is necessary to substitute screws for masonry or hollow wall mounting, be sure to use #6 or 4 mm hardware. 2. Run cables. Refer to Installation Ti...
