Pelco C1965M-C - Manual - manualsarea.com

Page 2 - CONTENTS; List of Illustrations

[ 2 ] Pelco Manual C1965M-C (12/03) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS ..................................................................................... 3 REGULATORY NOTICES ........................................................................................................

Page 3 - Regulatory Notices; Reorient or relocate the receiving antenna.; IMPORTANT SAFEGUARDS AND WARNINGS

Pelco Manual C1965M-C (12/03) [ 3 ] Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. Unless the unit is specifically marked as a NEMA Type 3, 3...

Page 4 - Available inputs include the following:

[ 4 ] Pelco Manual C1965M-C (12/03) DESCRIPTION The PMCL15A is a high resolution, 15-inch, thin film transistor (TFT) LCD color monitor. The unit producesa sharp picture with a resolution of 540 TV lines. The monitor features multiple video inputs for S-videoand PC-based imaging and supports circuit...

Page 5 - Video Coaxial Cable Requirements; Maximum Distance; Looping Operation - One Monitor with External Video Equipment

Pelco Manual C1965M-C (12/03) [ 5 ] Table A. Video Coaxial Cable Requirements Cable Type* Maximum Distance RG59/U 750 ft (229 m) RG6/U 1,000 ft (305 m) RG11/U 1,500 ft (457 m) * Minimum cable requirements: 75 ohms impedanceAll-copper center conductorAll-copper braided shield with 95% braid coverage ...

Page 7 - PMCL15A, Front Panel Controls; Front Panel Controls; BUTTONS - Use to navigate through the OSD menus.

Pelco Manual C1965M-C (12/03) [ 7 ] Figure 4. PMCL15A, Front Panel Controls Channel Menu 1 2 3 4 5 00871 Front Panel Controls Refer to Figure 4. 1 CHANNEL BUTTONChannel Select - Press the Channel button once to display a camera view.Auto Scan - Press and hold the button for three seconds to sequence...

Page 8 - OPERATION; How To Adjust The Video

[ 8 ] Pelco Manual C1965M-C (12/03) OPERATION 1. Turn the monitor’s main power switch ON. The power switch is located on the base of the monitor (refer to Figure 1). 2. Push IN the power button located on the front of the monitor (refer to Figure 4). The LED turns green. 3. Push the Channel button t...

Page 9 - Video Mode

Pelco Manual C1965M-C (12/03) [ 9 ] Video Mode BRIGHTNESS Press the button to increase brightness and the button todecrease brightness. Default setting is 80%. CONTRAST Proper adjustment will allow maximum gradations between thedarkest and lightest picture contrast.Press the button to increase contr...

Page 10 - PC Mode

[ 10 ] Pelco Manual C1965M-C (12/03) PC Mode CONTRAST Proper adjustment will allow maximum gradations between thedarkest and lightest picture contrast. Press the button toincrease contrast and the button to decrease contrast. Defaultsetting is 85% BRIGHTNESS Press the button to increase brightness a...

Page 11 - MAINTENANCE; Warranty and Return Information; SPECIFICATIONS; ELECTRICAL

Pelco Manual C1965M-C (12/03) [ 11 ] MAINTENANCE If the quality of the picture is poor and cannot be improved by making adjustments on the front controlpanel, inspect all system connections and cable runs. To reduce the risk of electrical shock, do not remove the cover or back of monitor. No user-se...

Page 12 - Modified format and specifications.; PRODUCT WARRANTY AND RETURN INFORMATION; WARRANTY; RETURNS

[ 12 ] Pelco Manual C1965M-C (12/03) REVISION HISTORY Manual # Date Comments C1965M 6/01 Original version. C1965M-A 7/01 Modified format and specifications. C1965M-B 7/01 Revised Front Panel Controls section. C1965M-C 12/03 Changed specifications and illustrations for BNC connector; updated icons. P...

Pelco C1965M-C - Manual

Table of Contents:

Summary

Other Pelco Models