Pelco C1665M-A - Manual
Pelco C1665M-A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Description; PARTS OF THE TRANSCEIVER
- Page 3 – Installation; MOUNTING; USING A RACK
- Page 4 – USING A WALL CLIP
- Page 5 – APPLICATIONS; Cable Type
- Page 10 – Specifications; ELECTRICAL
- Page 11 – PRODUCT WARRANTY AND RETURN INFORMATION
I N S T A L L A T I O N
TW3004P
Passive Four-Channel
Video Transceiver
C1665M-A (1/06)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 C1665M-A (1/06) Description The TW3004P is a four-channel passive video transceiver that can transmit multiple video signals over unshielded twisted pair (UTP) cable. The transceiver can be mounted into a fi ber rack (RK5000PS-3U/RK5000-3U). Each transceiver has four rubber feet allowing you to pl...
C1665M-A (1/06) 3 Installation Make sure all parts are present for the unit. 1 Terminal Block (with tension clamps) 1 Wall Clip MOUNTING The TW3004P transceiver is three rack units high and can be mounted into a fi ber rack or onto a wall using a fiber wall mount kit or the supplied wall clip. USING...
4 C1665M-A (1/06) USING A WALL CLIP To attach the TW3004P transceiver to a wall using the supplied wall clip, refer to Figure 2 and do the following: 1. Attach the wall clip to a wall using two screws (not supplied). 2. Slide the transceiver into the clip until the two holes on the bottom of the tra...
