Pelco c1493m-a - Manual

Pelco c1493m-a

Pelco c1493m-a – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4

Table of Contents:

  • Page 2 – Hard Ceiling Installation; Remove the appropriate wiring knockouts from the back box.; MAINTENANCE
  • Page 3 – SPECIFICATIONS; MECHANICAL; Camera Mounting: Adjustable camera sled (vertical or horizontal); GENERAL; Steel back box and lid; (Design and specifications are subject to change without notice.)
  • Page 4 – ® Pelco and the Pelco logo are registered trademarks of Pelco.; REVISION HISTORY; Date; Important Safeguards and Warnings; PRODUCT WARRANTY AND RETURN INFORMATION
Loading the manual

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1.

Installation and servicing should only be done by qualified service personnel and conform
to all local codes.

2.

Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure,
it is designed for indoor use only and it must not be installed where exposed to rain and
moisture.

3.

Only use replacement parts recommended by Pelco.

4.

The camera and lens combination shall not exceed 3.5 pounds (1.59 kg), unless the
E2020 is used.

5.

The maximum camera and lens combination is 10 pounds (4.5 kg) if the E2020 is used.

6.

The installation method and materials should be capable of supporting four times the
weight of the enclosure, pan/tilt, camera and lens combination.

The product and/or manual may bear the following marks:

C1493M-A (8/99)
EH2020 Security-Rated
Ceiling Enclosure

3500 Pelco Way,
Clovis, CA 93612-5699
USA

In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150

International Customers:
Tel (1-559) 292-1981
FAX (1-559) 348-1120

www.pelco.com

®

This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.

This symbol indicates that there are
important operating and maintenance
instructions in the literature accompa-
nying this unit.

C A U T I O N :

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.

DESCRIPTION

The EH2020 is a small, low-profile ceiling enclosure designed for mounting in fixed or dropped
ceilings. It is used for indoor applications only. The unobtrusive, compact design complements
any business or office decor and provides maximum discreet surveillance.

The EH2020 is constructed of steel and is engineered for ease of installation and service. The
back box is mounted above the ceiling and can be mounted directly on a ceiling tile with the
use of two soft-ceiling mounting brackets (included).

The lid is attached to the back box with two tamper-proof screws and is retained by a leash
when removed. When removed, It provides convenient access for adjusting the camera and
lens. The enclosure has an adjustable camera mounting sled to accommodate cameras of
varying sizes.

The EH2020 has an optically clear, impact-resistant Lexan

®

viewing window which allows no

loss of light to the lens and camera.

INSTALLATION

The following items are supplied:

1

EH2020 enclosure

1

Hex key for tamper-resistant screws

1

Thumbscrew, 1/4-20 x 1/2-inch (for camera mounting)

2

Soft-ceiling mounting brackets

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Hard Ceiling Installation; Remove the appropriate wiring knockouts from the back box.; MAINTENANCE

Hard Ceiling Installation To mount the EH2020 directly into a hard ceiling, perform the following steps: 1. Determine the location and direction of the enclosure to be mounted. Cut a hole in theceiling for the enclosure back box. Avoid cutting into any ceiling structural member. 2. Remove the two ta...

Page 3 - SPECIFICATIONS; MECHANICAL; Camera Mounting: Adjustable camera sled (vertical or horizontal); GENERAL; Steel back box and lid; (Design and specifications are subject to change without notice.)

SPECIFICATIONS MECHANICAL Camera Mounting: Adjustable camera sled (vertical or horizontal) Maximum Cameraand Lens Size: Accepts camera and lens combinations (including BNC connector) up to8 in. L x 2.8 in. W x 3 in. H (20.32 x 7.11 x 7.62 cm) Maximum Load(Camera and LensCombination): 3.5 lb (1.6 kg)...

Page 4 - ® Pelco and the Pelco logo are registered trademarks of Pelco.; REVISION HISTORY; Date; Important Safeguards and Warnings; PRODUCT WARRANTY AND RETURN INFORMATION

® Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved. REVISION HISTORY Manual # Date Comments C1493M 9/98 Original version. C1493M-A 8/99 Added maximum load, removed service manual information, reformatted manual. 8/18/99 Added certifications an...

Other Pelco Models

All Pelco Other