Pelco C1491M (7/98) - Manual
Pelco C1491M (7/98) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Be sure enclosure power
- Page 3 – sure the heater wires do not bind or catch on anything.
- Page 4 – RETURN INFORMATION; ® Pelco and the Pelco logo are registered; WARRANTY; RETURNS
®
EH2500 Series
Window and Heater
Assembly Replacement Kit
Installation/Operation Manual
C1491M (7/98)
1.0 WARNINGS
Prior to installation and use of this product, the following WARNINGS should be
observed.
1.
Installation and servicing should only be done by Qualified Service Personnel
and conform to all Local codes.
2.
Only use replacement parts recommended by Pelco.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of elec-
tric shock is present within this unit.
This symbol indicates that there are important operating and mainte-
nance instructions in the literature accompanying this unit.
Please thoroughly familiarize yourself with the information in this
manual prior to installation and operation.
Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Pelco Manual C1491M (7/98) 1.1 UNPACKING Unpack and inspect all parts carefully. INSTRUCTIONS The following items are supplied: 1 Installation/Operation Manual (C1491M) 1 EH2500 Series Window and Heater Assembly Replacement Kit; 120 VAC, 24VAC, or 230 VAC Be sure to save the shipping carton, boxes...
Pelco Manual C1491M (7/98) 3 5. Remove the O-ring from the viewing window and install the O-ring in the re-placement viewing window by performing the following steps: a. Be careful not to damage the O-ring when it is removed. If you havetrouble removing the O-ring, carefully insert a flat blade scre...
4 Pelco Manual C1491M (7/98) 4.0 WARRANTY AND RETURN INFORMATION ® Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved. Pelco, the Pelco logo, Camclosure, Esprit,Genex, Legacy, and Spectra are registeredtrademarks of Pelco.Endura and ExSite are t...
